Danfoss XGC 026P Data sheet

Data sheet

Plate heat exchanger XGC 026P

Dimensions, mm

The Plate Heat Exchanger has 4 connections as standard and should be installed with min. 600 mm space on both sides for service work.

Subject to alterations without prior notice.

		M4 M1
		M3 M2
S4	S1
		Movable cover, M
S3	S2	Stationary cover,S

DH-SMT/FI

VD.EJ.C1.02 © Danfoss 01/2009

Data sheet	Plate heat exchanger XGC C026P

Dimensions, mm

Standard connection dimension	DN100
Tightening bolt	M20
No. of long tightening bolts (TL)	4
No. of short tightening (TS)	6
Cover thickness	35 mm
Weight of guiding bar	11 kg/m
Weight of reinforced guiding bar	17 kg/m
Weight of tightening bolt	2,0 kg/m
A-dimension	4,5*n mm
C-dimension	LG+41 mm
F-dimension	LG+6 mm
Weight plate+gasket (W) AISI 304/316 0,5 mm	1,5 kg
AISI 304/316 0,6 mm	1,8 kg
Titanium 0,5 mm	1,0 kg
Titanium 0,6 mm	1,1 kg
Weight Frame	313+n*W kg

	Max No of plates		LTL		LG		C		F
	19	250		600		641		606
	37	375		600		641		606
	54	500		600		641		606
	56	500		1000		1041		1006
	92	750		1000		1041		1006
	113	1000		1000		1041		1006
	129	1000		1350		1391		1356
	164	1250		1350		1391		1356
	181	1250		1550		1591		1556
	166	1250		1550		1591		1556
	194	1500		1550		1591		1556
	203	1500		1900		1941		1906
	245	2000		1900		1941		1906
	276	2000		2250		2291		2256
	297	-		2250		2291		2256
	407	-		30001)		3041		3006

LTL = Length of long tightening bolt, based on 6,8 x n + 118 mm LG = Length of guiding bar, based on 6,8 x n + 230 mm

n = number of plates

1)LG>2875 mm reinforced guiding bar Height+60mm.

Total max no. of plates

All data is based on plates with material AISI 304/316 and thickness 0,5 mm.

AISI 304/316 0,5 mm

500

VD.EJ.C1.02

Produced by Danfoss A/S © 01/2009