Danfoss XBDW22H Data sheet

Data sheet

Micro plate heat exchanger (MPHE): XBDW22H

Description		XBDW22 is double wall heat exchanger designed
		for application where the flow mediums are not
		allowed to mix. The double wall heat exchanger
		prevents primary media to be mixed with the
		secondary media if there is and internal leak in
		the unit.
		Two stainless steel plates separate primary and
		secondary side with an air gap in between. In the
		event of a leak, the leaking media flows into the
		air gap to the outside, enabling visual detection
		of the leak.applications.
		Approval:
		- Pressure Equipment Directive (PED)
		Article 3.3 (SEP)
		- KIWA ATA

Ordering

1-pass heat exchanger XBDW22H

Accessories-Tailpieces

	Picture	No. of		Code No.
		plates, n	Type A	Type B	Type C
		10	-	004H4360	-
		12	-	004H4361	-
		14	004H4350	004H4362	-
		16	004H4351	004H4363	-
		18	004H4352	004H4364	-
		20	004H4353	004H4365	-
		22	004H4354	004H4366	-
		24	004H4355	004H4367	-
		26	004H4356	004H4368	-
		28	-	004H4369	-
		30	-	004H4370	-
		32	004H4357	004H4371	-
		34	-	004H4377	-
		36	-	004H4372	-
		38	-	004H4378	-
		40	-	004H4373	-
		42	-	004H4374	-
		44	-	004H4379	-
		46	-	004H4375	-
		48	-	004H4376	-
		12/12	-	-	004H4382
		16/16	-	-	004H4380
		20/20	-	-	004H4383
		24/24	-	-	004H4381

Picture	Description	Connection	Code No.1)
	Solder	G ¾ /15 mm	004B2945
	tailpieces	G ¾ /18 mm	004B2946
	Weld-on	G ¾ /DN 20	004B2944
	tailpieces
	Threaded	G ¾ /G ¾	004B2947
	tailpieces	G ¾ /G 1	004B2953

1) One set contains 2 tailpieces with union nuts and gaskets

1)Connection G1/2” with internal thread used only in type A. Position: on back side of Heat exchanger

© Danfoss | 2016.08

VD.JQ.F2.02 | 1

Data sheet	Micro plate heat exchanger (MPHE) XBDW22H

Technical data

	Max. working pressure	bar	16
	Min. / Max. temperature	°C	Primary side -10/180; Secondary side: -10/100
			DH: Circulation water / glycolic water up to 50%
	Flow medium		DC: ethylene-, propylene-glycolic water, ethanol-water solutions and other suitable heat
			transfer media. (Please contact your Danfoss representative).
	Volume/channel	Ltr	0,032
	Connection type		Cylindrical thread acc. to DIN ISO 228/1
	Connection size		G ¾ ; G ½
	Weight	kg	Type A: (0,124 x NoP x 2) + 0,99
			Type B & C: (0,124 x NoP x 2) + 0,95
	Materials
	Plate		Stainless steel, 316 Group
	Brazing		Copper (Cu); Copper-Nickel (CuNi)*

* Available on enquiry

Dimensions

Type	Connection	E (mm)
XBDW22H	G ¾ 1) ; G ½ 2)	8 + 1,6 × n

n = number of plates

1)Cylindrical thread acc. to DIN ISO 228/1

2)Connection with internal thread used only in type A. Position: on back side of Heat exchanger

Type A			Type B				Type C
119		18	119		18	119		12	18
72			72			72

<![if ! IE]> <![endif]>329

<![if ! IE]> <![endif]>329

<![if ! IE]> <![endif]>376

<![if ! IE]> <![endif]>376

<![if ! IE]> <![endif]>376

	12
<![if ! IE]> <![endif]>E	<![if ! IE]> <![endif]>E
	<![if ! IE]> <![endif]>E

Tailpieces

Picture

Description

Connection

a

b

SW

2)

Code No.

mm

b

Solder

G ¾ / 15 mm

15

35

32

004B2945

a

tailpieces

G ¾ / 18 mm

18

35

32

004B2946

b

Weld-on

G ¾ / DN 20

21,2

35

32

004B2944

a

tailpieces

b

Threaded

G ¾ / G ¾

3/4”

40

32

004B2947

a

tailpieces

G ¾ / G 1

1”

22

32

004B2953

2) Union nut, with across flats

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice.This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary eady agreed.

All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.

2 | © Danfoss | DHS-SRMT/SI | 2016.08

VD.JQ.F2.02