Danfoss VLT AutomationDrive Fact sheet

VLT® AutomationDrive

The premier, globally supported drive concept for exceptional control of motor driven applications.

Designed for variable speed con­trol of all asynchronous motors and
permanent magnet motors, on any in­dustrial machine or production line, a
VLT® AutomationDrive helps its owner
save energy, increase exibility, and
optimize processes.

Flexible and expandable

Built on a exible, modular design
concept the AutomationDrive is
packed with standard, industry
features out of the box. These can be
expanded with plug-and-play options
with additional features, positioning
control, eldbuses, safety functions
such as STO, SS1, SLS, SMS and SSM,
motor protection and more.

Robust and safe

VLT AutomationDrives are proven
performers in all industrial environ­ments and grid voltages, including
690V. Enclosures are available up

to IP 66 (depending on model), and
integrated DC chokes and RFI lters
in all models protect installations by
minimizing harmonic distortion and
electromagnetic interferences. All
drives are fully tested at the factory
before they are shipped.

Easy to set up and operate via the
user-friendly graphical control panel,
a VLT AutomationDrive only requires
little maintenance once in operation.
The result is an market leading control
solution that provides a fast return on
investment and a highly competitive
cost of ownership.

Power range

3 x 200 – 240 V ..................... 0.25 – 37 kW

3 x 380 – 480/500 V ......... 0.37 – 800 kW

3 x 525 – 600 V .............. 0.75 kW – 75 kW

3 x 525 – 690 V .............. 1.1 kW – 1.2 MW

Normal overload ..........1.5 kW – 1.4 MW

98%

Energy efficiency

Optmize processes
while reducing energy
costs. Versatile, flexible,
configurable and built to
last.

Feature Benet

Reliable Maximum uptime

Ambient temperature 50° C without derating Less need for cooling or oversizing
Available in IP 00, 20, 21, 54, 55

and 66 enclosures
Resistant to wear and tear Low lifetime cost
Back-channel cooling for frame D, E and F Prolonged lifetime of electronics

User-friendly Saves commissioning and operating cost

Plug-and-Play technology Easy upgrade and changeover
Awarded control panel User-friendly
Intuitive VLT® interface Saves time
Pluggable cage clamp connectors Easy connection
Exchangeable languages User-friendly

Intelligent

Intelligent warning systems Warning before controlled stop
Smart Logic Control Reduces need for PLC capacity
Advanced plug-in features Easy commissioning

Safe stop

STO: Safe Torque O (IEC 61800-5-2)

Intelligent heat management Intelligent heat management

Enclosures for all environments

Safety cat. 3, PL d (ISO 13849-1),
Stop cat. 0 (EN 60204-1)

SIL 2 (IEC 61508)
SIL CL 2 (IEC 62061)

Facts about our products

Fieldbus options

n VLT® PROFIBUS DP MCA 101
n VLT® DeviceNet MCA 104
n VLT® CanOpen MCA 105
n VLT® Probus Converter MCA 113
n VLT® Probus Converter MCA 114
n VLT® PROFINET MCA 120
n VLT® Ethernet/IP MCA 121
n VLT® Modbus TCP MCA 122
n VLT® POWERLINK MCA 123
n VLT® EtherCAT MCA 124
n VLT® DeviceNet Converter MCA 194

I/O and feedback options

n VLT® General Purpose I/O MCB 101
n VLT® Encoder Input MCB 102
n VLT® Resolver Input MCB 103
n VLT® Relay Card MCB 105
n VLT® 24 V External Supply MCB 107
n VLT® Extended Relay Card MCB 113
n VLT® Sensor Input MCB 114

Safety options

n VLT® Safe PLC I/O MCB 108
n VLT® PTC Thermistor Card MCB 112
n VLT® Safe Option MCB 140 Series
n VLT® Safe Option MCB 150 Series

Motion Control Options

n VLT® Motion Control Option

MCO 305

n VLT® Synchronizing Controller

MCO 350

n VLT® Position Controller MCO 351
n VLT® Center Winder MCO 352

Power options

n VLT® Brake resistors MCE 101
n VLT® Sine-Wave Filters MCC 101
n VLT® dU/dt Filters MCC 102
n VLT® Common Mode Filter MCC 105
n VLT® Advanced Harmonic Filters

AHF 005/010

Other accessories

n

IP 21/NEMA 1 Kit
(convert IP 20 to IP 21)

n PROFIBUS adapter
n Sub-D9 Connector
n Decoupling plate for

eldbus cables

n USB connection cable to PC
n Panel Through option
n LCP panel mounting kit

Specications

Mains supply (L1, L2, L3)

Supply voltage

Supply frequency 50/60 Hz
True Power Factor (λ) 0.92 nominal at rated load
Displacement Power Factor (cos φ) near unity (> 0.98)
Switching on input supply L1, L2, L3 Maximum 2 times/min.

Output data (U, V, W)

Output voltage 0–100% of supply voltage

Output frequency

Switching on output Unlimited
Ramp times 1–3600 sec.

Note: 160% current can be provided for 1 minute.
Higher overload rating is achieved by oversizing the drive.

Digital inputs

Programmable digital inputs FC 301: 4 (5) / FC 302: 4 (6)
Logic PNP or NPN
Voltage level 0–24 VDC

Note: One/two digital inputs can be programmed as digital output for FC 301/FC 302.

Analogue input

Analogue inputs 2
Modes Voltage or current

Voltage level

Current level

Pulse/encoder inputs

Programmable pulse/encoder inputs FC 301: 1 / FC 302: 2
Voltage level 0 – 24 V DC (PNP positive logic)

Digital output*

Programmable digital/pulse outputs FC 301: 1 / FC 302: 2
Voltage level at digital/frequency output 0 – 24 V

Analogue output*

Programmable analogue outputs 1
Current range 0/4–20 mA

Relay outputs*

Programmable relay outputs FC 301: 1 / FC 302: 2

Cable lengths

Max. motor cable lengths

*More analogue and digital inputs/outputs can be added with options.

n Mounting brackets
n Mains disconnect option
n USB Extension
n Interbus gateway MCA 110
n Option Adapter
n RCMB20/RCMB35 Leakage Current

Monitor Module

Brake chopper (IGBT) option

Limits the load on the intermediate
circuit in the case the motor acts as a
generator.

200 – 240 V ±10%
FC 301: 380 – 480 V ±10%
FC 302: 380 – 500 V ±10%, 525 – 600 V ±10%
525 – 690 V ±10%

FC 301: 0.2 – 590 Hz (0.25 – 75 kW)
FC 302: 0 – 590 Hz (0.25 – 75 kW)
0 – 590 Hz (90 – 1200 kW)
0 – 300 Hz (Flux mode)

FC 301: 0 to +10 V
FC 302: -10 to +10 V (scaleable)

0/4 to 20 mA (scaleable)

FC 301: 50 m / FC 302: 150 m

(screened/armoured)

FC 301: 75 m / FC 302: 300 m

(unscreened/unarmoured)

High power options

n

Emergency stop with Safety Relay

n

Safety Stop with Safety Relay

n

RFI Filters

n

NAMUR terminals

n

Residual Current Device

n

Insulation Resistance Monitor

n

Mains shielding

n

Regen terminals

Please see the VLT® High Power Drive Selection Guide
for the complete range of options.

Danfoss VLT Drives, Ulsnaes 1, DK-6300 Graasten, Denmark, Tel. [phone], Fax [phone]
www.danfoss.com/drives • E-mail: [e-mail]

DKDD.PFP.301.A3.02 VLT® is a trademark of Danfoss A/S Produced by PE-MMSC 2014.09