Danfoss VCM 22 Data sheet
Data Sheet
Non return valve
VCM 22
2”Vic. outlet
hpp.danfoss.com
Data Sheet | Non return valve VCM 22
Introduction
Features
Technical data and code numbers
The function of the non-return valve to be mounted directly on the outlet of the APP pump is to protect the pump by allowing flow out of the pump while blocking flow into the pump.
The valve incorporates a conical poppet design, which ensures sealing when used with a low viscosity medium such as water.
Typically used in connection with APP 21 - 30 and APP 22 pumps.
The non-return valve is produced in stainless Super Duplex W. Nr. 1.4410. The connection sealing is an O-ring made of Viton.
The valve is available for flows up to 22 m3/h or 370 l/min (97 gpm).
|
Max. |
Flow |
Opening |
Pressure loss |
Inlet |
Outlet |
Code |
|
Type |
pressure |
continuously |
pressure |
at max. flow |
||||
connection |
connection |
number |
||||||
|
bar (psi) |
l/min (gpm) |
bar (psi) |
bar (psi) |
||||
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
VCM 22 |
80 (1160) |
370 (97) |
0.3 (4.3) |
0.5 (7.3) |
M52 x 1,5 |
Vic. 2” |
180H0256 |
|
(63mm) |
||||||||
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
Filtration
The fluid must be clean and free from abrasive sediments.
2 | © Danfoss | DCS (im) 2019.09 |
AI318246693759en-000201 |
Loading...