Danfoss UT 72, UT 73, UT Data sheet

Data Sheet

Thermostat
Type UT

The UT thermostat is a temperature-controlled
electric switch with stainless steel (18/8) or
copper capillary and sensor.

The temperature can be set easily and
accurately using the large knob on the front of
the thermostat. The temperature must be set to
correspond to the required mean temperature.

Features:

• The thermostats has a xed dierential

• The temperature must be set in accordance
with the required mean temperature

• Electric connections are made by means of
cable clamps and terminal screws

• AMP quick connectors may be used in
connection with cabinet mounting

• UT is available for wall or panel mounting,
and can be used for: cold rooms, beverage
coolers, ice cream makers, milk coolers,
refrigerated counters, air-conditioning plant,
heat recovery systems

AI000086441706en-001101

Features

Values

Function range: UT 72 (for universal purposes)

-30 – 30 °C

Function range: UT 73 (for frost protection)

2.5 – 40 °C

Ambient temperature

-30 – 55 °C

Reset

Automatic

Dierential

Fixed, 3.0 K

Switch system

Changeover (SPDT) switch

Contact load

AC-1: 16 A / 250 V

AC-3: 7.5 A / 250 V

AC-15: 1 A / 250 V

Capillary tube

Copper or 18/8 steel

Sensor

Copper or 18/8 steel

UT for wall mounting

IP20 to EN 60529 / IEC 529

UT for building in

IP00 to EN 60529 / IEC 529

UT for wall mounting (Net weight 0.2 kg)

UT for panel mounting (Net weight 0.1 kg)

Ø6

A

SPDT

Danfoss

A60H21.3

1

4

2

119

Ø 1.25

Ø 6

34 15

5

38

28

43.511

28

19

M4 n°4 holes

SPDT

Danfoss

A60H28.2

Type

A

B

Copper

18/8

Copper

18/8

UT 72

max. 119

max. 150

1.25

0.9

UT 73

max. 119–1.25

–

Thermostat, UT

Product specication

Technical data

Table 1: Technical data

Dimensions [mm] and weights [kg]

Table 2: Dimensions [mm] and weights [kg]

© Danfoss | Climate Solutions | 2021.02 AI000086441706en-001101 | 2