Danfoss TF3.5F Data sheet
TF3.5F
Standard Compressor
R134a
115V 60Hz
General
Code number 102G3304
Approvals UL984
Compressors on pallet 125
Application
Application LBP
Frequency Hz 50 60
Evaporating temperature °F – -31 to 14
Voltage range V – 95 - 135
Max. condensing temperature continuous (short) °F – 140 (158)
Max. winding temperature continuous (short) °F – 257 (257)
Cooling requirements
Frequency Hz 50 60
Application
90°F – – – S – –
100°F – – – S – –
110°F – – – S – –
Remarks on application:
Motor
Motor type RSIR
LRA (rated after 4 sec. UL984), HST | LST A – 18.9
Cut in Current, HST | LST A – 18.9
Resistance, main | start winding (77°F) Ω 3.8 7.8
Design
Displacement cu.in 0.22
Oil quantity (type) .oz. 6.1 (polyolester)
Maximum refrigerant charge oz. 14.0
Free gas volume in compressor .oz. 60.6
Weight without electrical equipment lbs. 16.5
Dimensions
Height inch A 6.81
Suction connector location, I.D. in. | angle C 0.252-0.259 | 30°
material | comment Cu-plated steel | Rubber plug
Process connector location, I.D. in. | angle D 0.252-0.259 | 31.5°
material | comment Cu-plated steel | Rubber plug
Discharge connector location, I.D. in. | angle E 0.202-0.205 | 28°
material | comment Cu-plated steel | Rubber plug
Oil cooler connector location, I.D. in. | angle F –
material | comment –
Remarks:
LBP MBP HBP LBP MBP HBP
B 6.65
B1 –
B2 –
S = Static cooling normally sufcient
O = Oil cooling
F
= Fan cooling 1.5 m/s
1
(compressor compartment temperature
equal to ambient temperature)
F2 = Fan cooling 3.0 m/s necessary
SG = Suction gas cooling normally sufcent
– = not applicable in this area
June 2012 Manufactured by Secop for Danfoss - DEHC.ED.401.Q4.22 / 520N1354 1/2
ASHRAE LBP 115V, 60Hz, static cooling
Evap. temp. in °F -49 -40 -30 -20 -13 -10 0 10 14 20 30 40 41 45 50 59 68
Capacity in BTU/h 133 205 270 303 426 581 651
Power cons. in W 66 79 89 93 108 123 129
Current cons. in A 1.55 1.60 1.64 1.66 1.73 1.82 1.86
EER in BTU/Wh 2.03 2.59 3.04 3.25 3.96 4.73 5.03
EN 12900 Household (CECOMAF) 115V, 60Hz, static cooling
Evap. temp. in °F -49 -40 -30 -20 -13 -10 0 10 14 20 30 40 41 45 50 59 68
Capacity in W 32 49 64 72 101 138 155
Power cons. in W 66 79 89 93 108 123 129
Current cons. in A 1.55 1.60 1.64 1.66 1.73 1.82 1.86
COP in W/W 0.48 0.62 0.72 0.77 0.94 1.12 1.20
Accessories for TF3.5F Figure Code number Test conditions
Starting relay (protector incl.)
Protector 3/4“ Texas Instruments MRP57JK-6 Ambient temp. 90°F 90°F
a2
117U4122 Condensing temp. 130°F 131°F
ASHRAE
LBP
EN 12900/
CECOMAF
Protector 3/4“ Electrica T 0727/06 Suction gas temp. 90°F 90°F
Cover b 117U1021 Liquid temperature 90°F 131°F
Cord relief d 117U0349
Mounting accessories Code number
Bolt joint for one comp. Ø: 5 /8 i n. 118-1917
Bolt joint in quantities Ø: 5/8 in. 118-1918
Snap-on in quantities Ø: 5/8 in. 118-1919
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products
already on order provided that such alterations can be made without subsequential changes being necessary in specications already agreed.
All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
2/2 Manufactured by Secop for Danfoss - DEHC.ED.401.Q4.22 / 520N1354 June 2012
Loading...