Danfoss SC18CLX.2 LBP Data sheet

SC18CLX.2

LBP Compressor R404A/R507 220-240V 50Hz

General

Code number						104L2197
Approvals					EN 60335-2-34
Compressors on pallet						80
Application
Application						LBP
Frequency		Hz		50					60
Evaporating temperature		°C	-45 to -10						–
Voltage range		V	198 - 254						–
Max. condensing temperature continuous (short)		°C		55 (60)					–
Max. winding temperature continuous (short)		°C	125 (135)						–
Cooling requirements
Frequency		Hz		50					60
Application			LBP		MBP	HBP		LBP	MBP	HBP
32°C			F2		–	–		–	–	–
38°C			F2		–	–		–	–	–
43°C			F2		–	–		–	–	–
Remarks on application: 07-254V above -15°C evaporating temperature
Motor
Motor type						CSIR
LRA (rated after 4 sec. UL984), HST | LST		A		23.5					–
Cut in Current, HST | LST		A		23.5					–
Resistance, main | start winding (25°C)		Ω		3.3					14.0
Design
Displacement		cm3				17.68
Oil quantity (type)		cm3			600 (polyolester)
Maximum refrigerant charge		g				1300
Free gas volume in compressor		cm3				1460
Weight without electrical equipment		kg				13.8
Dimensions
Height		mm	A			219
			B			213
			B1			193
			B2			110
Suction connector	location/I.D. mm | angle		C			10.2 | 37°
	material | comment			Cu-plated steel | Al cap
Process connector	location/I.D. mm | angle		D			6.2 | 37°
	material | comment			Cu-plated steel | Al cap
Discharge connector	location/I.D. mm | angle		E			6.2 | 37°
	material | comment			Cu-plated steel | Al cap
Oil cooler connector	location/I.D. mm | angle		F				–
	material | comment						–
Connector tolerance	I.D. mm					±0.09
Remarks:

S

= Static cooling normally sufficient

O

= Oil cooling

F1

= Fan cooling 1.5 m/s

(compressor compartment temperature

equal to ambient temperature)

F2

= Fan cooling 3.0 m/s necessary

SG

= Suction gas cooling normally sufficent

–= not applicable in this area

Dec 2011

Manufactured by Secop for Danfoss - DEHC.ED.400.M3.02 / 520N0176

1/2

EN 12900 Household (CECOMAF)*				220V, 50Hz, fan cooling F2
Evap. temp. in °C	-45	-40	-35	-30		-25		-23.3				-20	-15	-10	-6.7	-5		0	5	7.2	10	15	20
Capacity in W	194	306	439	595		780		849				995	1245	1532
Power cons. in W	354	436	517	598		680		708				765	854	949
Current cons. in A	3.13	3.40	3.68	3.98		4.28		4.39				4.60	4.92	5.26
COP in W/W	0.55	0.70	0.85	1.00		1.15		1.20				1.30	1.46	1.61
ASHRAE LBP*				220V, 50Hz, fan cooling F2
Evap. temp. in °C	-45	-40	-35	-30		-25		-23.3				-20	-15	-10	-6.7	-5		0	5	7.2	10	15	20
Capacity in W	225	355	508	691		905		986				1156	1447	1783
Power cons. in W	354	436	517	598		680		708				765	854	949
Current cons. in A	3.13	3.40	3.68	3.98		4.28		4.39				4.60	4.92	5.26
COP in W/W	0.64	0.81	0.98	1.16		1.33		1.39				1.51	1.69	1.88

Accessories for	SC18CLX.2	Figure	Code number
PTC starting device	6.3 mm spade connectors	a1	–
	4.8 mm spade connectors		–
Starting relay	6.3 mm spade connectors	a2	117U6013
Cover		b	103N2009
Start. capacitor 125 µF 6.3 mm spade connectors		c	117U5012
Cord relief		d	103N1004
Protection screen for PTC		g	–

Test conditions	EN 12900/	ASHRAE
	CECOMAF*	LBP*
Condensing temperature	45°C	45°C
Ambient temperature	32°C	32°C
Suction gas temperature	32°C	32°C
Liquid temperature	no subcooling	32°C

Mounting accessories			Code number
Bolt joint for one comp.	Ø: 16	mm	118-1917
Bolt joint in quantities	Ø: 16	mm	118-1918
Snap-on in quantities	Ø: 16	mm	118-1919

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed.

All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.

2/2

Manufactured by Secop for Danfoss - DEHC.ED.400.M3.02 / 520N0176

Dec 2011