Danfoss SC15F Data sheet

SC15F

Standard Compressor

R134a

220-240V 50Hz

General

Code number						104G8500
Approvals					EN 60335-2-34
Compressors on pallet						80
Application
Application						LBP
Frequency		Hz		50						60
Evaporating temperature		°C	-35 to -10							–
Voltage range		V	198 - 254							–
Max. condensing temperature continuous (short)		°C		60 (70)						–
Max. winding temperature continuous (short)		°C	125 (135)							–
Cooling requirements
Frequency		Hz		50						60
Application			LBP		MBP	HBP		LBP		MBP	HBP
32°C			F1		–	–		–		–	–
38°C			F1		–	–		–		–	–
43°C			–		–	–		–		–	–
Remarks on application:
Can be used as a HBP compressor with 240V 50Hz mains (216-254V).
Motor
Motor type						RSIR/CSIR
LRA (rated after 4 sec. UL984), HST | LST		A		12.6						12.6
Cut in Current, HST | LST		A		12.6						17.2
Resistance, main | start winding (25°C)		Ω		6.7						11.8
Design
Displacement		cm3				15.28
Oil quantity (type)		cm3			550 (polyolester)
Maximum refrigerant charge		g				1300
Free gas volume in compressor		cm3				1410
Weight without electrical equipment		kg				12.6
Dimensions
Height		mm	A			209
			B			203
			B1			183
			B2			100
Suction connector	location/I.D. mm | angle		C			8.2 | 37°
	material | comment			Cu-plated steel | Al cap
Process connector	location/I.D. mm | angle		D			6.2 | 37°
	material | comment			Cu-plated steel | Al cap
Discharge connector	location/I.D. mm | angle		E			6.2 | 37°
	material | comment			Cu-plated steel | Al cap
Oil cooler connector	location/I.D. mm | angle		F				–
	material | comment						–
Connector tolerance	I.D. mm					±0.09
Remarks:

S

= Static cooling normally sufficient

O

= Oil cooling

F1

= Fan cooling 1.5 m/s

(compressor compartment temperature

equal to ambient temperature)

F2

= Fan cooling 3.0 m/s necessary

SG

= Suction gas cooling normally sufficent

–= not applicable in this area

Dec 2011

Manufactured by Secop for Danfoss - DEHC.ED.400.H6.02 / 520N1224

1/2

EN 12900 Household (CECOMAF)										220V, 50Hz, fan cooling F1
Evap. temp. in °C		-45		-40					-35	-30	-25	-23.3	-20		-15		-10	-6.7		-5								0					5				7.2	10			15	20
Capacity in W									100	155	230	260	325		439		573
Power cons. in W									186	229	275	291	324		377		432
Current cons. in A									1.67	1.78	1.93	1.99	2.11		2.28		2.4
COP in W/W									0.54	0.68	0.84	0.89	1.00		1.17		1.33
ASHRAE LBP										220V, 50Hz, fan cooling F1
Evap. temp. in °C		-45		-40					-35	-30	-25	-23.3	-20		-15		-10	-6.7		-5								0					5				7.2	10			15	20
Capacity in W									123	191	283	320	400		541		707
Power cons. in W									186	229	275	291	324		377		432
Current cons. in A									1.67	1.78	1.93	1.99	2.11		2.28		2.4
COP in W/W									0.66	0.83	1.03	1.10	1.23		1.44		1.64

Accessories for	SC15F	Figure	Code number
PTC starting device	6.3 mm spade connectors	a1	103N0002
	4.8 mm spade connectors		–
Starting relay	6.3 mm spade connectors	a2	117U6003
Cover		b	103N2009
Start. capacitor 80 µF	6.3 mm spade connectors	c	117U5017
Cord relief		d	103N1004
Protection screen for PTC		g	–

Test conditions	EN 12900/CECOMAF	ASHRAE LBP
Condensing temperature	55°C	55°C
Ambient temperature	32°C	32°C
Suction gas temperature	32°C	32°C
Liquid temperature	55°C	32°C

Mounting accessories			Code number
Bolt joint for one comp.	Ø: 16	mm	118-1917
Bolt joint in quantities	Ø: 16	mm	118-1918
Snap-on in quantities	Ø: 16	mm	118-1919

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed.

All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.

2/2

Manufactured by Secop for Danfoss - DEHC.ED.400.H6.02 / 520N1224

Dec 2011