Danfoss SC12MLX MBP Data sheet

SC12MLX

MBP Compressor

R404A/R507

208-230V 60Hz & 220-240V 50Hz

General

Code number						104L2606
Approvals				EN 60335-2-34, UL984
Compressors on pallet						80
Application
Application						MBP
Frequency		Hz		50					60
Evaporating temperature		°C	-23.3 to 7.2					-23.3 to 7.2
Voltage range		V	187 - 254					187 - 254
Max. condensing temperature continuous (short)		°C		50 (60)					50 (60)
Max. winding temperature continuous (short)		°C	125 (135)					125 (135)
Cooling requirements
Frequency		Hz		50					60
Application			LBP		MBP	HBP		LBP		MBP	HBP
32°C			–		F2	–		–		F2	–
38°C			–		F2	–		–		F2	–
43°C			–		F2	–		–		F2	–
Remarks on application:
Not applicable for 208V 60Hz at 0°C or higher evaporating temperature.
Motor
Motor type						CSIR
LRA (rated after 4 sec. UL984), HST | LST		A		23.4						–
Cut in Current, HST | LST		A		23.4						–
Resistance, main | start winding (25°C)		Ω		3.4					14.4
Design
Displacement		cm3				12.87
Oil quantity (type)		cm3			600 (polyolester)
Maximum refrigerant charge		g				1300
Free gas volume in compressor		cm3				1460
Weight without electrical equipment		kg				13.9
Dimensions
Height		mm	A			219
			B			213
			B1			193
			B2			110
Suction connector	location/I.D. mm | angle		C			8.2 | 37°
	material | comment			Cu-plated steel | Al cap
Process connector	location/I.D. mm | angle		D			6.5 | 37°
	material | comment			Cu-plated steel | Al cap
Discharge connector	location/I.D. mm | angle		E			6.5 | 37°
	material | comment			Cu-plated steel | Al cap
Oil cooler connector	location/I.D. mm | angle		F				–
	material | comment						–
Connector tolerance	I.D. mm					±0.09
Remarks:

S

= Static cooling normally sufficient

O

= Oil cooling

F1

= Fan cooling 1.5 m/s

(compressor compartment temperature

equal to ambient temperature)

F2

= Fan cooling 3.0 m/s necessary

SG

= Suction gas cooling normally sufficent

–= not applicable in this area

Dec 2011

Manufactured by Secop for Danfoss - DEHC.ED.401.B3.02 / 520N0608

1/2

ASHRAE MBP					230V, 60Hz, fan cooling F2
Evap. temp. in °C	-45	-40		-35	-30		-25		-23.3				-20	-15	-10	-6.7	-5		0	5	7.2	10	15	20
Capacity in W									554				667	859	1080	1245	1335		1629	1965	2127
Power cons. in W									552				609	692	775	830	860		949	1046	1092
Current cons. in A									3.39				3.57	3.87	4.21	4.46	4.59		5.01	5.47	5.68
COP in W/W									1.00				1.10	1.24	1.39	1.50	1.55		1.72	1.88	1.95
ASHRAE MBP					220V, 50Hz, fan cooling F2
Evap. temp. in °C	-45	-40		-35	-30		-25		-23.3				-20	-15	-10	-6.7	-5		0	5	7.2	10	15	20
Capacity in W									498				592	754	942	1083	1162		1415	1706	1847
Power cons. in W									507				548	609	667	705	724		780	836	860
Current cons. in A									3.72				3.84	4.03	4.25	4.40	4.48		4.72	4.99	5.11
COP in W/W									0.98				1.08	1.24	1.41	1.54	1.60		1.81	2.04	2.15
EN 12900 Household (CECOMAF)*					230V, 60Hz, fan cooling F2
Evap. temp. in °C	-45	-40		-35	-30		-25		-23.3				-20	-15	-10	-6.7	-5		0	5	7.2	10	15	20
Capacity in W									659				773	970	1199	1370	1465		1770	2118	2286
Power cons. in W									561				601	664	729	776	801		882	975	1021
Current cons. in A									3.38				3.52	3.76	4.05	4.26	4.37		4.73	5.14	5.32
COP in W/W									1.18				1.29	1.46	1.64	1.77	1.83		2.01	2.17	2.24
EN 12900 Household (CECOMAF)*					220V, 50Hz, fan cooling F2
Evap. temp. in °C	-45	-40		-35	-30		-25		-23.3				-20	-15	-10	-6.7	-5		0	5	7.2	10	15	20
Capacity in W									572				669	838	1038	1188	1272		1542	1852	2001
Power cons. in W									493				525	572	620	651	667		714	762	783
Current cons. in A									3.67				3.76	3.91	4.08	4.20	4.27		4.47	4.69	4.79
COP in W/W									1.16				1.27	1.46	1.68	1.83	1.91		2.16	2.43	2.55

Accessories for	SC12MLX	Figure	Code number
PTC starting device	6.3 mm spade connectors	a1	–
	4.8 mm spade connectors		–
Starting relay	6.3 mm spade connectors	a2	117U6011
Cover		b	103N2008
Start. capacitor 80 µF	6.3 mm spade connectors	c	117U5017
Cord relief		d	103N1004
Protection screen for PTC		g	–

Test conditions	EN 12900/	ASHRAE
	CECOMAF*	MBP
Condensing temperature	45°C	54.4°C
Ambient temperature	32°C	35°C
Suction gas temperature	32°C	35°C
Liquid temperature	no subcooling	46.1°C

Mounting accessories			Code number
Bolt joint for one comp.	Ø: 16	mm	118-1917
Bolt joint in quantities	Ø: 16	mm	118-1918
Snap-on in quantities	Ø: 16	mm	118-1919

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed.

All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.

2/2

Manufactured by Secop for Danfoss - DEHC.ED.401.B3.02 / 520N0608

Dec 2011