Danfoss SC12CLX LBP Data sheet

Datasheets
SC12CLX
LBP Compressor
R404A/R507, 220-240V 60Hz
General
Code number 104L2695
Approvals UL984
Compressors on pallet 80
Application
Application LBP
Frequency Hz 50 60
Evaporating temperature °C -40 to -10
Max. condensing temperature continuous (short) °C 55 (60)
Max. winding temperature continuous (short) °C 125 (135)
Cooling requirements
Frequency Hz 50 60
Application
32°C F2–
38°C F
43°C
Remarks on application:
Motor
Motor type CSIR
LRA (rated after 4 sec. UL984), HST | LST A 18.6
Cut in Current, HST | LST A 18.6
Resistance, main | start winding (25°C) 3.7 14.1
LBP MBP HBP LBP MBP HBP
2
S =Staticcoolingnormallysufcient
O = Oil cooling F1 = Fan cooling 1.5 m/s (compressor compartment temperature equal to ambient temperature) F2 = Fan cooling 3.0 m/s necessary
SG =Suctiongascoolingnormallysufcent
= not applicable in this area
Design
Displacement cm
Oil quantity (type) cm
Maximum refrigerant charge g 1300
Free gas volume in compressor cm
Weight without electrical equipment kg 13.7
Dimensions
Height mm A 219
Suction connector location/I.D. mm | angle C 8.2 | 37°
material | comment Copper | Rubber plug
Process connector location/I.D. mm | angle D 6.2 | 37°
material | comment Copper | Rubber plug
Discharge connector location/I.D. mm | angle E 6.2 | 37°
material | comment Copper | Rubber plug
Oil cooler connector location/I.D. mm | angle F
material | comment
Connector tolerance I.D. mm ±0.09
Remarks:
3
3
3
550 (polyolester)
B 213
B1 193
B2 110
12.87
1510
© Danfoss | DCS (CC) | 2017.04
DEHC.ED.200.E9.02 | 1
ASHRAE LBP* 230V, 60Hz, fan cooling F
Danf already on order pro All trademarks in this material are property of the respec
2
Evap. temp. in °C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 20
Capacity in W 190 343 509 694 762 901 1134 1399
Power cons. in W 290 383 464 540 565 614 692 781
Current cons. in A 2.61 2.77 2.98 3.23 3.33 3.54 3.89 4.29
COP in W/W 0.66 0.90 1.10 1.29 1.35 1.47 1.64 1.79
EN 12900 Household (CECOMAF)* 230V, 60Hz, fan cooling F
2
Evap. temp. in °C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 20
Capacity in W 146 282 429 590 649 770 972 1200
Power cons. in W 277 376 462 540 566 616 696 784
Current cons. in A 2.58 2.75 2.96 3.23 3.33 3.54 3.91 4.32
COP in W/W 0.53 0.75 0.93 1.09 1.15 1.25 1.40 1.53
Accessories for SC12CLX Figure Code number Test conditions
PTC starting device 6.3 mm spade connectors
4.8 mm spade connectors Ambient temperature 32°C 32°C
a1
Condensing temperature 45°C 43.3°C
EN 12900/CECOMAF*
Starting relay 6.3 mm spade connectors a2 117U6019 Suction gas temperature 32°C 32°C
Cover b 103N2008 Liquid temperature no subcooling 32°C
Start. capacitor 80 µF 6.3 mm spade connectors c 117U5017
Cord relief d 103N1004 Mounting accessories Code number
Protection screen for PTC g Bolt joint for one comp. Ø: 16 mm 118-1917
Bolt joint in quantities Ø: 16 mm 118-1918
Snap-on in quantities Ø: 16 mm 118-1919
oss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products
vided that such alterations can be made without subsequential changes being necessary eady agreed.
tive companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
2 |© Danfoss | DCS (CC) | 2017.04 DEHC.ED.200.E9.02
ASHRAE LBP*
Loading...