SC12CL
LBP/MBP Compressor R404A/R507 220-240V 50Hz
General
Code number |
|
|
|
|
|
104L2623 |
|
|
||
Approvals |
|
|
|
|
EN 60335-2-34 |
|
||||
Compressors on pallet |
|
|
|
|
|
80 |
|
|
||
Application |
|
|
|
|
|
|
|
|
|
|
Application |
|
|
|
|
|
LBP/MBP |
|
|
||
Frequency |
|
Hz |
|
50 |
|
|
|
60 |
|
|
Evaporating temperature |
|
°C |
-45 to -5 |
|
|
– |
|
|||
Voltage range |
|
V |
198 - 254 |
|
|
– |
|
|||
Max. condensing temperature continuous (short) |
°C |
|
55 (60) |
|
|
– |
|
|||
Max. winding temperature continuous (short) |
°C |
125 (135) |
|
|
– |
|
||||
Cooling requirements |
|
|
|
|
|
|
|
|
|
|
Frequency |
|
Hz |
|
50 |
|
|
|
60 |
|
|
Application |
|
|
LBP |
|
MBP |
HBP |
|
LBP |
MBP |
HBP |
32°C |
|
|
F2 |
|
F2 |
– |
|
– |
– |
– |
38°C |
|
|
F2 |
|
F2 |
– |
|
– |
– |
– |
43°C |
|
|
– |
|
– |
– |
|
– |
– |
– |
Remarks on application: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Motor |
|
|
|
|
|
|
|
|
|
|
Motor type |
|
|
|
|
|
CSIR |
|
|
||
LRA (rated after 4 sec. UL984), HST | LST |
A |
|
14.8 |
|
|
|
– |
|
||
Cut in Current, HST | LST |
|
A |
|
14.8 |
|
|
|
– |
|
|
Resistance, main | start winding (25°C) |
Ω |
|
5.0 |
|
|
|
13.7 |
|
||
Design |
|
|
|
|
|
|
|
|
|
|
Displacement |
|
cm3 |
|
|
|
12.87 |
|
|
||
Oil quantity (type) |
|
cm3 |
|
|
550 (polyolester) |
|
||||
Maximum refrigerant charge |
|
g |
|
|
|
1300 |
|
|
||
Free gas volume in compressor |
|
cm3 |
|
|
|
1460 |
|
|
||
Weight without electrical equipment |
kg |
|
|
|
12.5 |
|
|
|||
Dimensions |
|
|
|
|
|
|
|
|
|
|
Height |
|
mm |
A |
|
|
209 |
|
|
||
|
|
|
B |
|
|
203 |
|
|
||
|
|
|
B1 |
|
|
183 |
|
|
||
|
|
|
B2 |
|
|
100 |
|
|
||
Suction connector |
location/I.D. mm | angle |
C |
|
|
8.2 | 37° |
|
|
|||
|
material | comment |
|
Cu-plated steel | Al cap |
|||||||
Process connector |
location/I.D. mm | angle |
D |
|
|
6.2 | 37° |
|
|
|||
|
material | comment |
|
Cu-plated steel | Al cap |
|||||||
Discharge connector |
location/I.D. mm | angle |
E |
|
|
6.2 | 37° |
|
|
|||
|
material | comment |
|
Cu-plated steel | Al cap |
|||||||
Oil cooler connector |
location/I.D. mm | angle |
F |
|
|
|
– |
|
|
||
|
material | comment |
|
|
|
|
– |
|
|
||
Connector tolerance |
I.D. mm |
|
|
|
±0.09 |
|
|
|||
Remarks: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
S |
= Static cooling normally sufficient |
|||||||||||||||||||||||||||
O |
= Oil cooling |
|||||||||||||||||||||||||||
F1 |
= Fan cooling 1.5 m/s |
|||||||||||||||||||||||||||
|
|
|
|
(compressor compartment temperature |
||||||||||||||||||||||||
|
|
|
|
equal to ambient temperature) |
||||||||||||||||||||||||
F2 |
= Fan cooling 3.0 m/s necessary |
|||||||||||||||||||||||||||
SG |
= Suction gas cooling normally sufficent |
–= not applicable in this area
Dec 2011 |
Manufactured by Secop for Danfoss - CF.54.B4.02 / 520N1172 |
1/2 |
EN 12900 Household (CECOMAF) |
|
220V, 50Hz, fan cooling F2 |
|
|
|
|
|
|
|
|
|
|
|
|||||||||||
Evap. temp. in °C |
-45 |
-40 |
|
-35 |
-30 |
-25 |
|
-23.3 |
-20 |
-15 |
-10 |
-6.7 |
-5 |
|
0 |
5 |
7.2 |
10 |
15 |
20 |
||||
Capacity in W |
58 |
140 |
|
237 |
353 |
490 |
|
541 |
650 |
835 |
1048 |
1205 |
1292 |
|
|
|
|
|
|
|||||
Power cons. in W |
190 |
253 |
|
316 |
380 |
445 |
|
468 |
512 |
581 |
654 |
704 |
730 |
|
|
|
|
|
|
|||||
Current cons. in A |
2.15 |
2.27 |
|
2.43 |
2.61 |
2.82 |
|
2.90 |
3.06 |
3.34 |
3.64 |
3.85 |
3.97 |
|
|
|
|
|
|
|||||
COP in W/W |
0.30 |
0.55 |
|
0.75 |
0.93 |
1.10 |
|
1.16 |
1.27 |
1.44 |
1.60 |
1.71 |
1.77 |
|
|
|
|
|
|
|||||
ASHRAE LBP* |
|
|
|
|
220V, 50Hz, fan cooling F2 |
|
|
|
|
|
|
|
|
|
|
|
||||||||
Evap. temp. in °C |
-45 |
-40 |
|
-35 |
-30 |
-25 |
|
-23.3 |
-20 |
-15 |
-10 |
-6.7 |
-5 |
|
0 |
5 |
7.2 |
10 |
15 |
20 |
||||
Capacity in W |
67 |
162 |
|
275 |
410 |
568 |
|
629 |
754 |
971 |
1220 |
1404 |
1505 |
|
|
|
|
|
|
|||||
Power cons. in W |
190 |
253 |
|
316 |
380 |
445 |
|
468 |
512 |
581 |
654 |
704 |
730 |
|
|
|
|
|
|
|||||
Current cons. in A |
2.15 |
2.27 |
|
2.43 |
2.61 |
2.82 |
|
2.90 |
3.06 |
3.34 |
3.64 |
3.85 |
3.97 |
|
|
|
|
|
|
|||||
COP in W/W |
0.35 |
0.64 |
|
0.87 |
1.08 |
1.28 |
|
1.34 |
1.47 |
1.67 |
1.87 |
2.00 |
2.06 |
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Accessories for |
SC12CL |
Figure |
Code number |
PTC starting device |
6.3 mm spade connectors |
a1 |
– |
|
4.8 mm spade connectors |
– |
|
|
|
||
Starting relay |
6.3 mm spade connectors |
a2 |
117U6005 |
Cover |
|
b |
103N2009 |
Start. capacitor 80 µF |
6.3 mm spade connectors |
c |
117U5017 |
Cord relief |
|
d |
103N1004 |
Protection screen for PTC |
g |
– |
Test conditions |
EN 12900/CECOMAF |
ASHRAE LBP* |
Condensing temperature |
45°C |
43.3°C |
Ambient temperature |
32°C |
32°C |
Suction gas temperature |
32°C |
32°C |
Liquid temperature |
no subcooling |
32°C |
Mounting accessories |
|
|
Code number |
Bolt joint for one comp. |
Ø: 16 |
mm |
118-1917 |
Bolt joint in quantities |
Ø: 16 |
mm |
118-1918 |
Snap-on in quantities |
Ø: 16 |
mm |
118-1919 |
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed.
All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
2/2 |
Manufactured by Secop for Danfoss - CF.54.B4.02 / 520N1172 |
Dec 2011 |