Danfoss SC12CL Data sheet

SC12CL

LBP Compressor R404A/R507 115V 60Hz

General

Code number						104L1603
Approvals						UL984
Compressors on pallet						80
Application
Application						LBP
Frequency		Hz		50					60
Evaporating temperature		°F			–			-40 to 10
Voltage range		V			–			103 - 127
Max. condensing temperature continuous (short)		°F			–			131 (140)
Max. winding temperature continuous (short)		°F			–			257 (275)
Cooling requirements
Frequency		Hz		50					60
Application			LBP		MBP	HBP		LBP	MBP	HBP
90°F			–		–	–		F2	–	–
100°F			–		–	–		F2	–	–
110°F			–		–	–		F2	–	–
Remarks on application:

Motor
Motor type						CSIR
LRA (rated after 4 sec. UL984), HST \| LST		A		41.9					–
Cut in Current, HST \| LST		A		41.9					–
Resistance, main \| start winding (77°F)		Ω		1.0					4.3
Design
Displacement		cu.in				0.78
Oil quantity (type)		fl.oz.			18.6 (polyolester)
Maximum refrigerant charge		oz.				45.8
Free gas volume in compressor		fl.oz.				51.1
Weight without electrical equipment		lbs.				27.7
Dimensions
Height		inch	A			8.23
			B			8.00
			B1			7.20
			B2			3.93
Suction connector	location, I.D. in. \| angle		C	0.320-0.327 \| 37°
	material \| comment			Cu-plated steel \| Al cap
Process connector	location, I.D. in. \| angle		D	0.252-0.259 \| 37°
	material \| comment			Cu-plated steel \| Al cap
Discharge connector	location, I.D. in. \| angle		E	0.252-0.259 \| 37°
	material \| comment			Cu-plated steel \| Al cap
Oil cooler connector	location, I.D. in. \| angle		F				–
	material \| comment						–
Remarks:

= Static cooling normally sufficient

= Oil cooling

= Fan cooling 1.5 m/s

(compressor compartment temperature

equal to ambient temperature)

= Fan cooling 3.0 m/s necessary

= Suction gas cooling normally sufficent

–= not applicable in this area

Dec 2011

Manufactured by Secop for Danfoss - CF.54.U3.22 / 520N1189

1/2

ASHRAE LBP			115V, 60Hz, fan cooling F2
Evap. temp. in °F	-49	-40	-30	-20	-13	-10	0	10	14	20	30	40	41	45	50	59	68
Capacity in BTU/h		143	842	1577	2127	2374	3255	4246
Power cons. in W		212	374	510	595	629	739	848
Current cons. in A		4.92	5.44	6.08	6.60	6.84	7.73	8.74
EER in BTU/Wh		0.68	2.25	3.09	3.58	3.77	4.40	5.01
ASHRAE LBP*			115V, 60Hz, fan cooling F2
Evap. temp. in °F	-49	-40	-30	-20	-13	-10	0	10	14	20	30	40	41	45	50	59	68
Capacity in BTU/h		648	1229	1871	2366	2592	3414	4356
Power cons. in W		322	436	535	599	627	720	822
Current cons. in A		5.32	5.69	6.17	6.59	6.78	7.52	8.38
EER in BTU/Wh		2.01	2.82	3.50	3.95	4.14	4.74	5.30
EN 12900 Household (CECOMAF)* 115V, 60Hz, fan cooling F2
Evap. temp. in °F	-49	-40	-30	-20	-13	-10	0	10	14	20	30	40	41	45	50	59	68
Capacity in W		146	297	463	590	648	857	1095
Power cons. in W		308	429	533	600	628	723	826
Current cons. in A		5.26	5.64	6.15	6.58	6.79	7.55	8.43
COP in W/W		0.48	0.69	0.87	0.98	1.03	1.18	1.33

Accessories for	SC12CL	Figure	Code
			number

PTC starting device	1/4 in. spade connect.	–	–
	3/16 in. spade connect.	–	–
	3/16 in. spade connect.		–
Starting relay	1/4 in. spade connect.	a2	117U6020
Cover		b	103N2008
Start. capacitor 240 µF	1/4 in. spade connect.	c	117U5023
Cord relief		d	103N1004
Protection screen for PTC		–	–

Test conditions	ASHRAE	ASHRAE	EN 12900/
	LBP	LBP*	CECOMAF*

Condensing temp.	130°F	110°F	113°F
Ambient temperature	90°F	90°F	90°F
Suction gas temp.	90°F	90°F	90°F
Liquid temperature	90°F	90°F	no subcooling

Mounting accessories		Code number
Bolt joint for one comp.	Ø: 5/8 in.	118-1917
Bolt joint in quantities	Ø: 5/8 in.	118-1918
Snap-on in quantities	Ø: 5/8 in.	118-1919

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed.

2/2

Manufactured by Secop for Danfoss - CF.54.U3.22 / 520N1189

Dec 2011