Danfoss SC12, SC12CL Data sheet

SC12/12CL LBP/MBP Twin Compressor R404A/R507 220-240V 50Hz

General

Code number 104L4088

Approvals EN 60335-2-34

Compressors on pallet 18

Application

Application LBP/MBP

Frequency Hz 50 60

Evaporating temperature °C -45 to -5 –

Voltage range V 198 - 254 –

Max. condensing temperature continuous (short) °C 55 (60) –

Max. winding temperature continuous (short) °C 125 (135) –

Cooling requirements

Frequency Hz 50 60

Application

32°C F2F2– – – –

38°C F

43°C – – – – – –

Remarks on application:

LBP MBP HBP LBP MBP HBP

2F2

– – – –

S =Staticcoolingnormallysufcient

O = Oil cooling F1 = Fan cooling 1.5 m/s (compressor compartment temperature equal to ambient temperature) F2 = Fan cooling 3.0 m/s necessary

SG =Suctiongascoolingnormallysufcent

– = not applicable in this area

Motor

Motor type CSIR

LRA (rated after 4 sec. UL984) *, HST | LST A 2 x 14.8 –

Cut in Current *, HST | LST A 2 x 14.8 –

Resistance, main | start winding (25°C) Ω 5.0 13.7

* Operational current for the second compressor time-delayed.

Design

Displacement cm

Oil quantity (type) cm

Maximum refrigerant charge g 2200

Free gas volume in compressor cm

Weight without electrical equipment kg 27.3

Dimensions

Height mm A 249

Suction connector (service valve) location/I.D. mm C 12 | 37°

Suction connector (solder connector) location/I.D. mm C 12 | 37°

Process connector location/I.D. mm | angle D 6.2 | 37°

material | comment Cu-plated steel | Al cap

Discharge connector location/I.D. mm | angle E 6.2 | 37°

material | comment Cu-plated steel | Al cap

Oil cooler connector location/I.D. mm | angle F –

material | comment –

Connector tolerance I.D. mm ±0.09

Remarks:

1220 (polyolester)

B 244

B1 183

B2 100

2 x 12.87

2820

Dec 2011 Manufactured by Secop for Danfoss - CF.54.G3.02 / 520N1181 1/2

EN 12900 Household (CECOMAF)* 220V, 50Hz, fan cooling F

Evap. temp. in °C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 20

Capacity in W 115 279 475 706 980 1083 1299 1670 2096 2411 2583

Power cons. in W 379 506 633 761 891 936 1024 1163 1308 1407 1460

Current cons. in A 4.30 4.55 4.85 5.22 5.64 5.80 6.13 6.67 7.27 7.71 7.94

COP in W/W 0.30 0.55 0.75 0.93 1.10 1.16 1.27 1.44 1.60 1.71 1.77

ASHRAE LBP/MBP 220V, 50Hz, fan cooling F

Evap. temp. in °C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 20

Capacity in W 134 323 550 819 1137 1257 1509 1941 2440 2796 3011

Power cons. in W 379 506 633 761 891 936 1024 1163 1308 1407 1460

Current cons. in A 4.30 4.55 4.85 5.22 5.64 5.80 6.13 6.67 7.27 7.71 7.94

COP in W/W 0.35 0.64 0.87 1.08 1.28 1.34 1.47 1.67 1.87 1.99 2.06

Accessories SC12/12CL pcs. Code number Test conditions

EN 12900/

CECOMAF*

ASHRAE

LBP/MBP

Starting device 470 mm cable length – Condensing temperature 45°C 45°C

550 mm cable length 2 – Ambient temperature 32°C 32°C

650 mm cable length – Suction gas temperature 32°C 32°C

Starting relay 6.3 mm spade connectors 2 117U6005 Liquid temperature no subcooling 32°C

Start. capacitor 80 µF 6.3 mm spade connectors 2 117U5017

Cover 2 103N2009

Cord relief 2 103N1004

Time-delay relay 1 117N0001

Check valve (to be used with time-delay relay) 2 020-1014

Service valve 12 mm 1 118-7350

Solder connector (alternative) 12 mm 1 104B0584

Service valve 16 mm 1 –

Solder connector (alternative) 16 mm 1 –

Seal ring for service valve and solder connector 1 118-3638

Mounting accessories pcs. Code number

Bolt joint for one compressor Ø: 16 mm 2 118-1917

Bolt joint in quantities Ø: 16 mm 2 118-1918

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to

productsalreadyonorderprovidedthatsuchalterationscanbemadewithoutsubsequentialchangesbeingnecessaryinspecicationsalreadyagreed.

2/2 Manufactured by Secop for Danfoss - CF.54.G3.02 / 520N1181 Dec 2011