Danfoss SC10MLX MBP Data sheet

Datasheets

SC10MLX MBP Compressor

R404A/R507, 220-240V 50Hz & 208-230V 60Hz

General

Code number

104L2506

Approvals

EN 60335-2-34, UL984

Compressors on pallet

80

Application

Application

MBP

Frequency

Hz

50

60

Evaporating temperature

°C

-23.3 to 7.2

-23.3 to 7.2

Voltage range

V

187 - 254

187 - 254

Max. condensing temperature continuous (short)

°C

50 (60)

50 (60)

Max. winding temperature continuous (short)

°C

125 (135)

125 (135)

Cooling requirements

Frequency

Hz

50

60

Application

LBP

MBP

HBP

LBP

MBP

HBP

32°C

–

F2

–

–

F2

–

38°C

–

F2

–

–

F2

–

43°C

–

F2

–

–

F2

–

Remarks on application:

Motor

Motor type

CSIR

LRA (rated after 4 sec. UL984), HST | LST

A

18.4

–

Cut in Current, HST | LST

A

18.4

–

Resistance, main | start winding (25°C)

Ω

4.3

15.3

Design

Displacement

cm3

10.29

Oil quantity (type)

cm3

600 (polyolester)

Maximum refrigerant charge

g

1300

Free gas volume in compressor

cm3

1410

Weight without electrical equipment

kg

13.1

Dimensions

Height

mm

A

209

B

203

B1

183

B2

100

Suction connector

location/I.D. mm | angle

C

8.2 | 37°

material | comment

Copper | Rubber plug

Process connector

location/I.D. mm | angle

D

6.5 | 37°

material | comment

Copper | Rubber plug

Discharge connector

location/I.D. mm | angle

E

6.5 | 37°

material | comment

Copper | Rubber plug

Oil cooler connector

location/I.D. mm | angle

F

–

material | comment

–

Connector tolerance

I.D. mm

±0.09

Remarks:

S

= Static cooling normally sufficient

O

= Oil cooling

F1

= Fan cooling 1.5 m/s

(compressor compartment temperature

equal to ambient temperature)

F2

= Fan cooling 3.0 m/s necessary

SG

= Suction gas cooling normally sufficent

–= not applicable in this area

© Danfoss | DCS (CC) | 2017.04

DEHC.ED.200.E7.02 | 1

ASHRAE MBP					230V, 60Hz, fan cooling F2
Evap. temp. in °C	-45	-40		-35	-30		-25	-23.3			-20	-15	-10	-6.7	-5		0		5		7.2		10	15	20
Capacity in W								452			550	717	909	1051	1130		1384		1676		1817
Power cons. in W								462			510	581	650	696	721		795		877		915
Current cons. in A								2.88			3.04	3.29	3.58	3.79	3.91		4.26		4.65		4.83
COP in W/W								0.98			1.08	1.23	1.40	1.51	1.57		1.74		1.91		1.98
ASHRAE MBP					220V, 50Hz, fan cooling F2
Evap. temp. in °C	-45	-40		-35	-30		-25	-23.3			-20	-15	-10	-6.7	-5		0		5		7.2		10	15	20
Capacity in W								400			479	615	773	891	957		1169		1413		1532
Power cons. in W								428			461	510	557	587	603		648		692		712
Current cons. in A								3.35			3.45	3.61	3.78	3.90	3.97		4.17		4.39		4.48
COP in W/W								0.93			1.04	1.21	1.39	1.52	1.59		1.81		2.04		2.15
EN 12900 Household (CECOMAF)					230V, 60Hz, fan cooling F2
Evap. temp. in °C	-45	-40		-35	-30		-25	-23.3			-20	-15	-10	-6.7	-5		0		5		7.2		10	15	20
Capacity in W								547			646	816	1015	1164	1246		1510		1812		1958
Power cons. in W								470			504	557	612	651	672		740		817		856
Current cons. in A								2.87			2.99	3.20	3.44	3.62	3.72		4.02		4.36		4.53
COP in W/W								1.16			1.28	1.47	1.66	1.79	1.85		2.04		2.22		2.29
EN 12900 Household (CECOMAF)					220V, 50Hz, fan cooling F2
Evap. temp. in °C	-45	-40		-35	-30		-25	-23.3			-20	-15	-10	-6.7	-5		0		5		7.2		10	15	20
Capacity in W								465			546	687	855	981	1051		1278		1537		1663
Power cons. in W								416			442	481	518	543	556		594		633		650
Current cons. in A								3.31			3.39	3.51	3.65	3.75	3.80		3.96		4.14		4.23
COP in W/W								1.12			1.23	1.43	1.65	1.81	1.89		2.15		2.43		2.56

Accessories for	SC10MLX	Figure	Code number
PTC starting device	6.3 mm spade connectors	a1	–
	4.8 mm spade connectors		–
Starting relay	6.3 mm spade connectors	a2	117U6011
Cover		b	103N2008
Start. capacitor 80 µF	6.3 mm spade connectors	c	117U5017
Cord relief		d	103N1004
Protection screen for PTC		g	–

Test conditions	EN 12900/CECOMAF	ASHRAE MBP
Condensing temperature	45°C	54.4°C
Ambient temperature	32°C	35°C
Suction gas temperature	32°C	35°C
Liquid temperature	no subcooling	46.1°C

Mounting accessories			Code number
Bolt joint for one comp.	Ø: 16	mm	118-1917
Bolt joint in quantities	Ø: 16	mm	118-1918
Snap-on in quantities	Ø: 16	mm	118-1919

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice.This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary eady agreed.

All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.

2 |© Danfoss | DCS (CC) | 2017.04

DEHC.ED.200.E7.02