Danfoss SC10GH Data sheet

Datasheets

SC10GH Heat pump Compressor

R134a, 220-240V 50/60Hz

General

Code number						104G8041
Approvals			EN 60335-2-34, UL984, CCC
Compressors on pallet						80
Application
Application						HBP
Frequency		Hz		50					60
Evaporating temperature		°C	-15 to 20					-15 to 15
Voltage range		V	198 - 254					198 - 254
Max. condensing temperature continuous (short)		°C		70 (70)				60 (70)
Max. winding temperature continuous (short)		°C	125 (135)					125 (135)
Cooling requirements
Frequency		Hz		50					60
Application			LBP		MBP	HBP		LBP	MBP		HBP
32°C			–		–	F2		–	–		F2
38°C			–		–	F2		–	–		F2
43°C			–		–	F2		–	–		F2
Remarks on application:
Motor
Motor type						CSIR
LRA (rated after 4 sec. UL984), HST | LST		A		14.8					–
Cut in Current, HST | LST		A		14.8					–
Resistance, main | start winding (25°C)		Ω		5.0					13.7
Design
Displacement		cm3				10.29
Oil quantity (type)		cm3			500 (polyolester)
Maximum refrigerant charge		g				1300
Free gas volume in compressor		cm3				1410
Weight without electrical equipment		kg				12.2
Dimensions
Height		mm	A			209
			B			193
			B1			173
			B2			90
Suction connector	location/I.D. mm | angle		C			10.2 | 37°
	material | comment				Copper | Rubber plug
Process connector	location/I.D. mm | angle		D			6.2 | 37°
	material | comment				Copper | Rubber plug
Discharge connector	location/I.D. mm | angle		E			8.2 | 37°
	material | comment				Copper | Rubber plug
Oil cooler connector	location/I.D. mm | angle		F				–
	material | comment						–
Connector tolerance	I.D. mm					±0.09
Remarks:

S

= Static cooling normally sufficient

O

= Oil cooling

F1

= Fan cooling 1.5 m/s

(compressor compartment temperature

equal to ambient temperature)

F2

= Fan cooling 3.0 m/s necessary

SG

= Suction gas cooling normally sufficent

–= not applicable in this area

© Danfoss | DCS (CC) | 2017.04

DEHC.ED.200.E5.02 | 1

EN 12900 Household (CECOMAF)					220V, 50Hz, fan cooling F2
Evap. temp. in °C	-45	-40		-35	-30	-25		-23.3			-20	-15	-10	-6.7			-5	0		5		7.2	10	15	20
Capacity in W												233	352	434			478	613		762		832	927	1113	1323
Power cons. in W												235	281	309			323	361		395		409	426	453	476
Current cons. in A												2.34	2.57	2.73			2.80	3.03		3.26		3.36	3.48	3.70	3.92
COP in W/W												0.99	1.25	1.41			1.48	1.70		1.93		2.03	2.18	2.46	2.78
EN 12900 Household (CECOMAF)					220V, 60Hz, fan cooling F2
Evap. temp. in °C	-45	-40		-35	-30	-25		-23.3			-20	-15	-10	-6.7			-5	0		5		7.2	10	15	20
Capacity in W												318	421	498			541	683		849		930	1042	1265
Power cons. in W												287	340	374			392	444		496		518	545	593
Current cons. in A												2.13	2.37	2.54			2.63	2.90		3.18		3.30	3.46	3.76
COP in W/W												1.11	1.24	1.33			1.38	1.54		1.71		1.80	1.91	2.13
ASHRAE HBP					220V, 50Hz, fan cooling F2
Evap. temp. in °C	-45	-40		-35	-30	-25		-23.3			-20	-15	-10	-6.7			-5	0		5		7.2	10	15	20
Capacity in W												257	387	477			525	675		840		918	1023	1230	1465
Power cons. in W												235	280	308			321	359		393		406	423	449	472
Current cons. in A												2.34	2.57	2.72			2.80	3.02		3.24		3.34	3.46	3.68	3.89
COP in W/W												1.09	1.38	1.55			1.64	1.88		2.14		2.26	2.42	2.74	3.10
ASHRAE HBP					220V, 60Hz, fan cooling F2
Evap. temp. in °C	-45	-40		-35	-30	-25		-23.3			-20	-15	-10	-6.7			-5	0		5		7.2	10	15	20
Capacity in W												354	467	552			599	756		939		1029	1153	1400
Power cons. in W												289	340	374			391	442		492		514	541	587
Current cons. in A												2.11	2.36	2.52			2.61	2.87		3.14		3.26	3.42	3.72
COP in W/W												1.23	1.37	1.48			1.53	1.71		1.91		2.00	2.13	2.38

Accessories for	SC10GH	Figure	Code number
PTC starting device	6.3 mm spade connectors	a1	–
	4.8 mm spade connectors		–
Starting relay	6.3 mm spade connectors	a2	117U6005
Cover		b	103N2008
Start. capacitor 80 µF	6.3 mm spade connectors	c	117U5017
Cord relief		d	103N1004
Protection screen for PTC		g	–

Test conditions	EN 12900/CECOMAF	ASHRAE HBP
Condensing temperature	55°C	55°C
Ambient temperature	32°C	32°C
Suction gas temperature	32°C	32°C
Liquid temperature	55°C	32°C

Mounting accessories			Code number
Bolt joint for one comp.	Ø: 16	mm	118-1917
Bolt joint in quantities	Ø: 16	mm	118-1918
Snap-on in quantities	Ø: 16	mm	118-1919

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice.This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary eady agreed.

All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.

2 |© Danfoss | DCS (CC) | 2017.04

DEHC.ED.200.E5.02