Danfoss SC10G Data sheet

Datasheets

SC10G

Universal Compressor

R134a, 220-240V 50/60Hz

General

Code number 104G8000

Approvals EN 60335-2-34

Compressors on pallet 80

Application

Application LBP/HBP LBP/MBP

Frequency Hz 50 60

Evaporating temperature °C -35 to 15 -35 to -5

Voltage range V 187 - 254 198 - 254

Max. condensing temperature continuous (short) °C 60 (70) 60 (70)

Max. winding temperature continuous (short) °C 125 (135) 125 (135)

Cooling requirements

Frequency Hz 50 60

Application

32°C F1F2F2F1F2–

38°C F

43°C F

Remarks on application:

LBP MBP HBP LBP MBP HBP

1F2F2F1F2

S =Staticcoolingnormallysufcient

O = Oil cooling F1 = Fan cooling 1.5 m/s (compressor compartment temperature equal to ambient temperature) F2 = Fan cooling 3.0 m/s necessary

SG =Suctiongascoolingnormallysufcent

–

– = not applicable in this area

–

Motor

Motor type RSIR/CSIR

LRA (rated after 4 sec. UL984), HST | LST A 11.1 10.2

Cut in Current, HST | LST A 11.1 14.6

Resistance, main | start winding (25°C) Ω 8.5 14.1

Design

Displacement cm

Oil quantity (type) cm

Maximum refrigerant charge g 1300

Free gas volume in compressor cm

Weight without electrical equipment kg 12.1

Dimensions

Height mm A 199

Suction connector location/I.D. mm | angle C 8.2 | 37°

material | comment Copper | Rubber plug

Process connector location/I.D. mm | angle D 6.2 | 37°

material | comment Copper | Rubber plug

Discharge connector location/I.D. mm | angle E 6.2 | 37°

material | comment Copper | Rubber plug

Oil cooler connector location/I.D. mm | angle F –

material | comment –

Connector tolerance I.D. mm ±0.09

Remarks:

550 (polyolester)

B 193

B1 173

B2 90

10.29

1510

DEHC.ED.200.E4.02 | 1

EN 12900 Household (CECOMAF) 220V, 50Hz, fan cooling F

Danf already on order pro All trademarks in this material are property of the respec

Evap. temp. in °C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 20

Capacity in W 23 60 113 135 183 268 369 445 486 618 764 833 925 1100

Power cons. in W 93 139 181 195 220 256 290 311 322 353 383 396 412 441

Current cons. in A 1.29 1.34 1.41 1.44 1.50 1.61 1.72 1.8 1.85 1.98 2.12 2.18 2.26 2.40

COP in W/W 0.25 0.43 0.63 0.69 0.83 1.05 1.27 1.43 1.51 1.75 2.00 2.11 2.25 2.49

ASHRAE LBP 220V, 50Hz, fan cooling F

Evap. temp. in °C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 20

Capacity in W 29 74 139 166 225 331 456 550 600 764 946 1032 1147 1367

Power cons. in W 93 139 181 195 220 256 290 311 322 353 383 396 412 441

Current cons. in A 1.29 1.34 1.41 1.44 1.50 1.61 1.72 1.8 1.85 1.98 2.12 2.18 2.26 2.40

COP in W/W 0.31 0.53 0.77 0.85 1.02 1.29 1.57 1.80 1.86 2.16 2.47 2.61 2.78 3.10

Accessories for SC10G Figure Code number Test conditions

PTC starting device 6.3 mm spade connectors

4.8 mm spade connectors – Ambient temperature 32°C 32°C

103N0011 Condensing temperature 55°C 55°C

EN 12900/CECOMAF

Starting relay 6.3 mm spade connectors a2 117U6002 Suction gas temperature 32°C 32°C

Cover b 103N2009 Liquid temperature 55°C 32°C

Start. capacitor 80 µF 6.3 mm spade connectors c 117U5017

Cord relief d 103N1004 Mounting accessories Code number

Protection screen for PTC g – Bolt joint for one comp. Ø: 16 mm 118-1917

Bolt joint in quantities Ø: 16 mm 118-1918

Snap-on in quantities Ø: 16 mm 118-1919

oss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products

vided that such alterations can be made without subsequential changes being necessary eady agreed.

ASHRAE LBP