Danfoss SC10DL MBP, SC10DL HBP Data sheet
Datasheets
SC10DL
MBP/HBP Compressor
R404A/R507 & R407C, 220-240V 50Hz
General
Code number 104L2525
Approvals EN 60335-2-34
Compressors on pallet 80
Application
Application MBP/HBP
Frequency Hz 50 60
Evaporating temperature °C -20 to 15 –
Voltage range V 198 - 254 –
Max. condensing temperature continuous (short) °C 55 (60) –
Max. winding temperature continuous (short) °C 125 (135) –
Cooling requirements
Frequency Hz 50 60
Application
32°C – F2F2– – –
38°C – F
43°C – – – – – –
Remarks on application:
Motor
Motor type CSIR
LRA (rated after 4 sec. UL984), HST | LST A 14.8 –
Cut in Current, HST | LST A 14.8 –
Resistance, main | start winding (25°C) Ω 5.0 13.7
LBP MBP HBP LBP MBP HBP
2F2
– – –
S =Staticcoolingnormallysufcient
O = Oil cooling
F1 = Fan cooling 1.5 m/s
(compressor compartment temperature
equal to ambient temperature)
F2 = Fan cooling 3.0 m/s necessary
SG =Suctiongascoolingnormallysufcent
– = not applicable in this area
Design
Displacement cm
Oil quantity (type) cm
Maximum refrigerant charge g 1300
Free gas volume in compressor cm
Weight without electrical equipment kg 13.1
Dimensions
Height mm A 209
Suction connector location/I.D. mm | angle C 8.2 | 37°
material | comment Copper | Rubber plug
Process connector location/I.D. mm | angle D 6.2 | 37°
material | comment Copper | Rubber plug
Discharge connector location/I.D. mm | angle E 6.2 | 37°
material | comment Copper | Rubber plug
Oil cooler connector location/I.D. mm | angle F –
material | comment –
Connector tolerance I.D. mm ±0.09
Remarks:
3
3
3
600 (polyolester)
B 203
B1 183
B2 100
10.29
1410
© Danfoss | DCS (CC) | 2017.04
DEHC.ED.200.E3.02 | 1
EN 12900 Household (CECOMAF) R404A/R507, 220V, 50Hz, fan cooling F
Danf
already on order pro
All trademarks in this material are property of the respec
2
Evap. temp. in °C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 20
Capacity in W 471 611 775 899 968 1192 1450 1576 1747 2085
Power cons. in W 373 429 479 508 522 559 590 601 614 631
Current cons. in A 2.55 2.78 2.97 3.09 3.15 3.30 3.42 3.47 3.53 3.61
COP in W/W 1.26 1.42 1.62 1.77 1.85 2.13 2.46 2.62 2.85 3.30
ASHRAE LBP R404A/R507, 220V, 50Hz, fan cooling F
2
Evap. temp. in °C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 20
Capacity in W 547 710 902 1047 1128 1391 1696 1845 2048 2451
Power cons. in W 373 429 479 508 522 559 590 601 614 631
Current cons. in A 2.55 2.78 2.97 3.09 3.15 3.30 3.42 3.47 3.53 3.61
COP in W/W 1.47 1.66 1.89 2.06 2.16 2.49 2.88 3.07 3.34 3.88
EN 12900 Household (CECOMAF) R407C, 220V, 50Hz, fan cooling F
2
Evap. temp. in °C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 20
Capacity in W 480 636 752 821 1039 1293 1417 1588 1927
Power cons. in W 346 394 421 437 476 510 524 540 568
Current cons. in A 2.50 2.66 2.75 2.81 2.95 3.08 3.14 3.20 3.31
COP in W/W 1.39 1.61 1.78 1.88 2.18 2.54 2.71 2.94 3.40
ASHRAE LBP R407C, 220V, 50Hz, fan cooling F
2
Evap. temp. in °C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 20
Capacity in W 515 682 806 881 1114 1388 1522 1706 2073
Power cons. in W 346 394 421 437 476 510 524 540 568
Current cons. in A 2.50 2.66 2.75 2.81 2.95 3.08 3.14 3.20 3.31
COP in W/W 1.49 1.73 1.91 2.01 2.34 2.72 2.91 3.16 3.65
Accessories for SC10DL Figure Code number Test conditions
PTC starting device 6.3 mm spade connectors
4.8 mm spade connectors – Ambient temperature 32°C 32°C
a1
– Condensing temperature 45°C 45°C
EN 12900/CECOMAF
Starting relay 6.3 mm spade connectors a2 117U6005 Suction gas temperature 32°C 32°C
Cover b 103N2009 Liquid temperature 45°C 32°C
Start. capacitor 80 µF 6.3 mm spade connectors c 117U5017
Cord relief d 103N1004 Mounting accessories Code number
Protection screen for PTC g – Bolt joint for one comp. Ø: 16 mm 118-1917
Bolt joint in quantities Ø: 16 mm 118-1918
Snap-on in quantities Ø: 16 mm 118-1919
oss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products
vided that such alterations can be made without subsequential changes being necessary eady agreed.
tive companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
2 |© Danfoss | DCS (CC) | 2017.04 DEHC.ED.200.E3.02
ASHRAE LBP
Loading...