Danfoss RPC06 User guide

Danfoss RPC06 User guide

Pilot Operated Check Valves Technical Information

Pilot to Open RPC06

OPERATION

This is a pilot-to-open check valve.

SPECIFICATIONS

Theoretical performance

 

 

 

 

 

Pressure drop

 

 

 

psi

26 cSt [121 SUS] hyd.oil at 50ƱC [122 ƱF]

 

 

bar

 

 

 

 

 

 

200

15

 

 

 

 

 

 

 

 

 

 

 

 

 

150

10

 

 

 

3-2

 

 

 

 

 

 

2-3

 

 

100

 

 

 

 

 

 

 

 

 

 

 

 

 

50

5

 

 

 

 

 

 

 

 

 

 

 

 

 

0

0

10

20

30

40

50 l/min

 

 

 

 

 

0

3

6

9

13

gal/min

Schematic

Specifications

Rated pressure*

350 bar [5075 psi]

Rated flow at 7 bar

35 l/min

[100 psi]

[9.25 US gal/min]

Weight

0.10 kg [0.22 lb]

Pilot ratio

3.4:1

Cavity

NCS06/3

*Rated pressure based on NFPA fatigue test standard (at 1 million cycles)

Note: A piston seal requires a 5 bar [72.5 psi] or greater return spring.

DIMENSIONS

Cross-sectional view

 

 

mm [in]

 

 

27 mm

 

 

 

M22 X 1.5

44-50 Nm [32-37 lbf*ft]

49

 

2

 

 

 

 

[1.93]

 

[0.08]

 

 

1

<![if ! IE]>

<![endif]>Ø 18 [Ø 0.71] Ø 19 [Ø 0.75]

 

<![if ! IE]>

<![endif]>Ø 26.5 [Ø 1.04]

3

2

8.5

48.9

[0.33]

[1.93]

ORDERING

 

 

 

RPC06-5-OR-00-V

INFORMATION

Pilot to Open

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Crack Pressure

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0.5

0.5 bar [7 psi]

 

 

 

 

 

 

 

 

2

2 bar [30 psi]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5

5 bar [72.5 psi]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

10

10 bar [145 psi]

 

 

 

 

 

 

 

 

 

 

 

 

 

Pilot Seal Option

Omit

No seals

OR

Seals

Seal Option

Seal Kit

Omit = Buna-N

230000070

V = Viton

230000110

Code

Ports & Material

Body Nomenclature

00

00 = Cartridge only

No Housing

SE3/8

AL, 3/8 BSP

NCS06/3-SE-3/8

SE1/2

AL, 1/2 BSP

NCS06/3-SE-1/2

SE6S

AL, #6 SAE

NCS06/3-SE-6S

SE8S

AL, #8 SAE

NCS04/3-SE-8S

** Aluminum bodies are to be used for pressures less than 210 bar (3000 psi)

***Other housings available

BC332375625108en-000101 • February 2020

PO - 7

Loading...