Danfoss PDCV05-3Z11 Technical Information

OPERATION

SPECIFICATIONS

DIMENSIONS mm [in]

<![if ! IE]> <![endif]>70mm

<![if ! IE]> <![endif]>[2.76in]

ORDERING INFORMATION

Proportional Valves Technical Information

Proportional Directional

PDCV05-3Z11

This is a non-compensated proportional directional control valve.

Rated pressure	350 bar [5075 psi]
Rated Flow at 10 bar	60 l/min
[150 psi]	[16 US gal/min]
Weight	6.60 kg [14.60 lb]
Hysteresis	6% maximum
Threshold current	0.2 A (12 VDC coil)
	0.1 A (24 VDC coil)
Maximum control	1.8 A (12 VDC coil)
current	0.9 A (24 VDC coil)
Cavity	ISO D05
Standard Coil	PD05 23 Watt

SCHEMATIC

A

B

P

T

THEORETICAL PERFORMANCE

			US gal/min																		flow vs current
														26 cSt [125 SUS] hyd.oil @ 20° C [68° F]
								l/min
			20					80
																			Nominal flow = 60 l/min
			15					60
															At 10 bar
			flow 10					40							(145 psi)
															pressure drop
			5					20
																														Nominal flow
			0																											= 30 l/min
								0
							0							0.5					1.0							1.5								2.0		2.5
																	Current, Amps (12VDC coil)
S gal/min																	pressure drop
		l/min
15		60
																													Current = 2.40 Amps
10		40
																																		1.92 Amps
5		20															1.44 Amps
																						0.96 Amps
0			0
			bar				50							100					150							200								250		300						350
	psi
			0				1000							2000												3000								3500								5000
								Loop Pressure Drop																		P A								B		T

Cross-sectional view

318 mm

[12.52 in]

PDCV05-3Z11/30-12-E1

Connector

E1 = DIN 43650

E8 = Lead wires

E10 = Deutsch on leads

Flow rate					Voltage
30	= 30 l/min [7.9 US gal/min]			12		=	12 VDC
60	= 60 l/min [15.8 US gal/min]			24		=	24 VDC

Seal kit

B = Buna N 158-8023 V = Viton 158-8094 All internal seals are Viton

Bolt kit
1/4-20 Thd	158-8095
M6 Thd	158-8024

BC332375973113en-000101 • February 2020

PV - 18