Operating Guide
AMV 20, AMV 30
|
|
|
AMV 20, AMV 30 + |
AMV 20, AMV 30 + |
AMV 20, AMV 30 + |
AMV 20, AMV 30 + |
|
|
|
|
VS2 (DN 20-25) |
VM2 (DN 15-50) |
VB2 (DN 15-50) |
AVQM (see Data sheet) |
|
|
|
|
|
|
|
|
|
MAINTENANCE |
|
5-95 % RH |
|
|
|
|
|
FREE |
|
no condensing |
|
|
|
|
|
4 – 6 mm × 1 mm |
32 mm |
|
T 10 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4× |
or |
|
|
|
|
A |
CLOSE |
|
|
|
Max 25 Nm |
|
OPEN |
|
||
1× 32 mm |
|
|
|
|
|
|
B |
|
24 VAC, |
|
|
|
|
|
230 VAC |
N |
0 V |
|
Neutral |
|
|
1 |
|
|
082G3008 |
24 V |
|
|
|
082G3012 |
||
|
|
Input power |
|
|
|
|
|
|
|
|
|
|
|
supply |
|
082G3007 |
|
|
3 |
|
|
230 V |
|
|
|
|
082G3011 |
||
|
|
|
|
|
|
230 V |
4, 5 |
1 |
4 |
Output |
|
3 |
5 |
|
|||
|
|
|
|
© Danfoss | 2016.11 |
EI.96.A3.00 | 1 |
AMV 20, AMV 30
155
|
<![if ! IE]> <![endif]>3 |
min. 100 |
<![if ! IE]> <![endif]>H |
|
|
|
<![if ! IE]> <![endif]>1 |
|
<![if ! IE]> <![endif]>H |
|
<![if ! IE]> <![endif]>2 |
|
<![if ! IE]> <![endif]>H |
<![if ! IE]> <![endif]>120 |
|
|
AMV 20/30 |
AMV 20/30 |
AMV 20/30 |
VM 2 (DN 15-50) |
VS 2 DN (20-25) |
VB 2 (DN 15-50) |
16 |
|
|
47,5
min. 160
|
|
|
|
83 |
|
|
|
|
|
|
|
H1 |
H2 |
H3 |
H4 |
H5 |
H6 |
|
|
<![if ! IE]> <![endif]>6 |
|
DN |
|
|
|
|
|
|
|
|
<![if ! IE]> <![endif]>H |
|
|
|
|
mm |
|
|
<![if ! IE]> <![endif]>4 |
<![if ! IE]> <![endif]>5 |
|
||
|
|
|
|
|
|
|
||||
15 |
176 |
155 |
205 |
288,8 |
300,3 |
- |
<![if ! IE]> <![endif]>H |
<![if ! IE]> <![endif]>H |
|
|
|
|
|
||||||||
20 |
176 |
162 |
205 |
288,8 |
300,3 |
- |
|
|
|
|
25 |
176 |
168 |
205 |
291,8 |
303,3 |
- |
|
|
|
|
32 |
176 |
- |
229 |
292,8 |
375 |
390 |
|
|
|
|
40 |
194 |
- |
229 |
- |
375 |
390 |
|
|
|
|
50 |
194 |
- |
229 |
- |
375 |
390 |
AMV 20, AMV 30 + |
AMV 20, AMV 30 + |
AMV 20, AMV 30 + |
|
AVQM PN 25 (DN 15-50) |
AVQM PN 25 (DN 32-50) |
|||||||||
|
|
|
|
|
|
|
AVQM PN 16 (DN 15-32) |
|
|
|
|
|
|
|
|
|
|
Hazardous Substances Table |
|
|
|||
Part Name |
|
|
|
|
|||
(Pb) |
(Hg) |
(Cd) |
|
(Cr(VI)) |
(PBB) |
(PBDE) |
|
|
|
||||||
|
|
|
|
|
|
|
|
Housing/ |
X |
O |
O |
|
O |
O |
O |
Nut/ |
X |
O |
O |
|
O |
O |
O |
|
|
|
|
|
|
|
|
Bushings/ |
X |
O |
O |
|
O |
O |
O |
O: GB/T 26572
O: Indicates that this hazardous substance contained in all of the homogeneous material for this part is below the limit requirement in GB/T 26572; X: GB/T 26572
X: Indicates that this hazardous substance contained in at least one of the homogeneous material for this part is above the limit requirement in GB/T 26572;
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice.This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary eady agreed.
All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
2 | © Danfoss | DHS-SRMT/SI | 2016.11 |
73692202 / EI.96.A3.00 |