Data Sheet
PLUS+1® Controllers
MC050-120 and MC050-122
Mobile machine management
The MC050-120 and MC050-122 controllers are
elements of the flexible, powerful, expandable, and
affordable PLUS+1® family of mobile machine
management products. These devices are generalpurpose controllers that are equally suited for use as
members of a distributed machine control system,
with intelligence in every node, or as stand-alone
controllers.
Product highlights
The MC050-120 employs a 32 bit Cortex-M3
Processor, providing the controller with extremely
fast single cycle processing speed and 512K internal
flash. The MC050-122 has an application key that
enables the use of Danfoss developed GUIDE machine
control solutions. The same GUIDE HWD file is used
with both controllers.
Application development
Users develop MC050-120 and MC050-122
applications with PLUS+1® GUIDE. This Microsoft
Windows® based development environment features
a user-friendly, field proven, icon-based graphical
programming tool, application downloader, and
service/diagnostic tool.
Features
•
User-programmable with PLUS+1
GUIDE (Graphical User Integrated
Development Environment)
•
50 pins: (1) DEUTSCH DRC connector
•
ARM 32 bit Cortex-M3 running at 120
MHz
•
FRAM non-volatile memory
•
12 bit analog-to-digital converter
•
9 to 36 Vdc power supply, monitored
internally
•
2 CAN 2.0 B ports, the fixed range
analog input can be configured as the
shield pin
®
®
•
Power supply for external sensors rated
at 5 Vdc to 500 mA, and regulated
internally
•
2 LEDs under user control
•
3 mounting alternatives: stack, end, or
side
•
MC050-122 contains application key
required to run Danfoss developed
machine control application software
•
CE compliant
Comprehensive technical literature is
online at www.danfoss.com
©
Danfoss | June 2020 AI152986480926en-000203 | 1
Data Sheet
MC050-120 and 122 Controllers
24 inputs
•
(6) universal (DIN/AIN/FreqIN) that are user-defined as either:
Analog: with configurable ranges 0 to 5.25 Vdc (with over range protection) or 0 to 36 Vdc
‒
Digital: pull up (5 Vdc), pull down (0 Vdc) or pull to center (2.5 Vdc)
‒
Frequency (timing): 1 Hz to 10 kHz
‒
•
(10) digital (DIN) configurable as pull up (5 Vdc), pull down (0 Vdc)
•
(4) digital/analog (DIN/AIN) that are user-defined as either:
Digital: pull up (5 Vdc), pull down (0 Vdc) or pull to center (2.5 Vdc)
‒
Analog: 0 to 5.25 Vdc or 0 to 36 Vdc
‒
•
(2) analog (AIN/Temp/Rheo) 0 to 5.25 Vdc or 0 to 10,000 ohm rheostat
•
(2) fixed range analog (AIN/CAN shield) 0 to 5.25 Vdc or CAN shield pin
14 outputs
•
(6) universal (PWMOUT/DOUT/PVGOUT) that are user-defined as either:
Digital: (3 A), configurable as source or sink
‒
PWM: (30 to 4000 Hz), configurable as open or closed loop with current control
‒
Analog voltage: open loop PWM at 4000 Hz
‒
•
Any PWMOUT/DOUT/PVGOUT can be used to provide reference power to one PVG valve
•
(6) digital (DOUT) (3 A), configurable as source only
•
(2) digital/PVG power supply (DOUT/PVG Pwr) (3 A), user-configurable; one DOUT/PVG Pwr will power up to three PVGs
2 | © Danfoss | June 2020 AI152986480926en-000203
Loading...