Danfoss MBV 2000 Data sheet

Data Sheet

Isolation valve Type MBV 2000

Designed for mounting between Danfoss pressure transmitters

The MBV 2000 isolation valve is designed for mounting between Danfoss pressure transmitters with DIN 3852 - E pressure connection and uid-lled systems.

The isolation valve automatically closes when a transmitter is removed, so transmitters can be changed easily without having to rst drain a system. The valve reopens when a transmitter is connected.

Features

• Compact design

• Fast and easy installation and removal

• Simple and eective isolation

AI225186435108en-000301

Pressure

Operating pressure Burst pressure

Up to 600 bar 1500 bar

Temperature

Operating temperature

-20 – 200 °C

Wetted parts

All metal parts in contact with the medium

DIN 17440-1.4404 (AISI 316 L)

Gasket

Viton

System medium

The valve is impervious to fuel oil, oil and air

It is not recommended for use with petroleum, combustible gasses or corrosive chemicals.

Packaging

Isolation valves are supplied with two plastic protective covers which should be removed prior to use.

Locking / xing

For safety, it is essential that the isolation valve is thoroughly secured to the system prior to connecting / disconnecting a transmitter. The valve must not become loose when a transmitter is being removed.

Fitting & removal

It is recommended to remove or t transmitters at a system pressure below 40 bar.

TypeAB

[mm]D[mm]

Code no.

MBV 2000-111

G ¼ DIN 3852-E

G ¼ A DIN 3852-E

17.5

29.4

061B6001

MBV 2000-123

G ¼ DIN 3852-E

G ½ A DIN 3852-E

15.4

29.4

061B6002

MBV 2000-223

G ½ DIN 3852-E

G ½ A DIN 3852-E

20.4

34.4

061B6003

Isolation valve, type MBV 2000

Product specication

Technical data

Table 1: Performance

Table 2: Materials

Table 3: Mounting

Application note

The MBV 2000 must only be used to connect Danfoss transmitters with a pressure connection in compliance to DIN-3852-E.

Specication and code numbers for standard types

+ 2 hidden pages