Danfoss MBT 5722 Data sheet

Data Sheet

Temperature sensor

Type MBT 5722

For monitoring bearing temperature in stern tubes

Designed specially for monitoring bearing temperature in stern tubes:

Flexible protection tube that makes it possible to reach bearings placed up to 20m from the terminal box.

Precision Pt 100 element secures fast and precise caption of the bearing temperature which makes it possible to prevent bearing damage.

Features

• Flexible sheath (bending radius down to R = 30 mm)

• Moveable compression •tting

• Robust construction with resistance to shock and vibrations to IEC 60068-2-6

• Up to 200 °C media temperature with Pt 100 resistance element

• Short reaction time

AI202086427489en-000801

Temperature sensor, type MBT 5722

Product speci€cation

Technical data

Table 1: General data

Measuring range	-50 – 200 °C
Sensing element	Pt 100, 3 wire connection
Protection tube	ø4.5 mm

Table 2: Response times

Indicative response time

	Water 0.2 m/s	t0.5	t0.9
		4 s	12 s

Table 3: Mechanical and environmental speci€cations

	Max. ambient temperature	70 °C (brief in max. 2 hours: 80 °C)
	Vibration stability	Shock:	100 g/6 ms
		Vibrations:	4 g sine function 2 – 100 Hz, measured acc. to IEC 60068-2-6
	Enclosure	Sensor tube IP67 according to IEC 60529; Terminal box IP65 according to IEC 60529
	Cable entry	Pg 11
	Material, wetted parts	AISI 316 Ti

Table 4: Net weight with a length of 2000 mm

Net weight, approx.	600 g
Length / net weight ratio	40 g per 1000 mm

Table 5: Sensor tolerance

	EN 60751 Class B	± (0.3 + 0.005 × t)
		t = media temperature, numerical value

Figure 1: Measurement deviation

<![if ! IE]> <![endif]>Max. deviation	[oC]
	[oC]
	Media temperature

© Danfoss | Climate Solutions | 2021.02

AI202086427489en-000801 | 2