Data Sheet
Temperature sensor
Type MBT 5270
Compact temperature sensor for harsh marine applications.
The exible temperature sensor MBT 5270 can
be used in many marine and industrial
applications such as: Air Compressors, Mobile
Hydraulics and Marine EGR systems. In other
words applications where robustness, size and
performance are essentials.
The sensor can be equipped with dierent
sensing elements (RTD and NTC).
Features:
• OEM Temperature Sensor program
• Various sensor elements available (RTD and
NTC)
• Robust, high protection against moisture
• Fixed measuring insert
• Stainless steel
• Very low response times
• Temperature range up to 300 °C
• Available with cable and plug
AI298141313986en-000201
Danfoss
84Z8217
Features
Description
Ambient temperature
Cable
PVC
-40 – 100 °C
Silicon
-40 – 200 °C
Teon
-40 – 200 °C
Polyolen (oil resistant)
-40 – 150 °C
Plug
AMP spade
-40 – 200 °C
AMP Junior Power Timer
-40 – 125 °C
Deutsch DT04-3P
-40 – 125 °C
Media temperature
Pt 100
-50 – 300 °C
NTC
-50 – 150 °C, Special versions up to 300 °C
Max. external pressure
Operating pressure
400 bar
Burst pressure
Max. 500 bar
Max. tightening torque
M14
24 Nm
Features
Description
Sensor Element
Pt 100, Pt 1000, NTC
Process Connection
Refer to ordering standard, see page Cable version
Sensor insertion length
Stainless steel
35 mm @ d ≤ 5 mm
Electrical Connection
Stripped wire ends
Cable with AMP spade (6.35)
Cable with Deutsch DT04-3P-2P
Other on request
Connection
2, 3 or 4 wire (depending on electrical connection)
Material protection tube
Protection tube
Indicative response times
Water 0,2 m/s
t
0.5t0.9
Stainless steel
ø3 mm
0.5 s
1.5 s
Features
Description
Sensor tolerances
Pt 1000 / Pt 100
NTC
EN 60751 Class B: ± (0.3 + 0.005 × t)
On request
Vibration stability
Shock
50 g / 6 ms
Vibrations, x-y-z directions
15.3 g sine, 20 – 2000 Hz, 8 hours
Enclosure
Sensor only
Cable with AMP spade
Cable with AMP Junior Timer
Cable with Deutsch DT04
IP67 according to IEC 60529
IP00 according to IEC 60529
IP65 according to IEC 60529
IP65 according to IEC 60529
Temperature sensor, Type MBT 5270
Product specications
Technical data
Cable version
Figure 1: Cable version
Table 1: General data
Table 2: Performance
Table 3: Indicative response times
Response times can vary very much depending on the design of the sensor and the temperature element chosen.
Table 4: Mechanical and environmental specications
© Danfoss | Climate Solutions | 2021.02 AI298141313986en-000201 | 2
Features
Description
Protection tube in contact with media
AISI 316
Process connection
AISI 316
Cable
PVC, Silicon, Teon (other on request)
Gasket
Viton, NBR (other on request)
Danfoss
84Z8225
Features
Description
Ambient temperature
Plug
-40 – 125 °C
Media temperature
Pt 1000, Pt 100
NTC
-50 – 300 °C
-50 – 150 °C
special versions up to 300 °C
Max. external pressure
Operating pressure
400 bar
Burst pressure
> 500 bar
Max. tightening torque
M8
10 Nm
Features
Description
Sensor Element
Pt 100, Pt 1000, NTC
Process Connection
Refer to ordering standard, see page Integrated plug version
Sensor insertion length
Stainless steel
70 mm @ d ≥ 8 mm
50 mm @ 8 > d > 5 mm
Electrical Connection
M12 x1
Connection
2 wire
Material protection tube
Protection tube
Indicative response times
Water 0,2 m/s
t
0.5t0.9
Stainless Steel
ø6 mm
6 s
18 s
Features
Description
Sensor tolerances
Pt 1000 / Pt 100
NTC
EN 60751 Class B
On request
Vibration stability
Shock
50 g / 6 ms
Vibrations, x-y-z directions
15.3 g sine, 20 – 2000 Hz, 8 hours
Enclosure
M12 x 1
IP65 according to IEC 60529
Features
Description
Protection tube in contact with media
AISI 316
Process connection
AISI 316
Gasket
Viton, NBR (other on request)
Plug
PPS (Ryton 4)
Temperature sensor, Type MBT 5270
Table 5: Materials
Integrated plug version
Figure 2: Integrated plug version
Table 6: General data
Table 7: Performance
Table 8: Indicative response times
Response times can vary very much depending on the design of the sensor and the temperature element chosen.
Table 9: Mechanical and environmental specications
Table 10: Materials
© Danfoss | Climate Solutions | 2021.02 AI298141313986en-000201 | 3
Danfoss
60G390
A
A
Key
Danfoss
84Z95
Danfoss
84Z8226
24
AMP spade (6.35)
Deutsch DT04 3 pin
Deutsch DT04 2 pin
Danfoss
60G452
Danfoss
60G372
A: Red, B: Red, C: White
Danfoss
84Z94
47
20
10
ø6
1180
14
Danfoss
84Z8227
Temperature sensor, Type MBT 5270
Electrical connection
Cable version
Table 11: Electrical connections
Integrated plug version
Figure 3: M12 x 1
Dimensions
Cable version
Examples:
Insertion length: Li = 21 to xx (max. 80 mm)
Cable length: Lc = 0.5 m to x.xx m
Figure 4: -50 – 150 °C
Integrated plug version
Figure 6: Dimensions of integrated plug version
Figure 5: -50 –150 °C / 300 °C
© Danfoss | Climate Solutions | 2021.02 AI298141313986en-000201 | 4
Type MBT 5270
Measuring range Cable length
-50 – 150 °C
0 050
0.5 m
-50 – 200 °C
1 100
1.0 m
-50 – 300 °C
2 200
2.0 m
Other
9 400
4.0 m
xxx
x.x m
Resistance value Cable
1 × Pt 100
0 0
None
1 x Pt 1000
2 1
Silicone
1 x NTC 1000
5 3
Teflon
1 x NTC 2000
6 4
Teflon, screened
1 x NTC 10000
7 5
PVC
Other
9
6
PVC, screened
9
Other
Tolerance
EN 60751 Class B
0
± 1%
1
± 2%
2
± 3%
3
Other
9
Connection
NTC characteristic
0
2-wire
No NTC
0
1
3-wire
1
2
4-wire
Other
9
Protection tube Plug
Acid-Proof Steel, AISI 316
1 0
Non
Other
9
1
AMP (Spade 6.35)
2
AMP Flying– 3 pin
Insertion length (100 mm max)
5
Deutsch, Flying DT04 – 2 pin
25 mm
025 9
Other
30 mm
030
40 mm
040
60 mm
060
Other
xxx
Insert
0
Fixed
Process connection
0
G ¼ A
1
G 3/₈ A
2
G ½ A
3
M10 × 1
C
M14 × 1.5
9
Other
25°/25°
Temperature sensor, Type MBT 5270
Ordering
Cable version
Figure 7: Ordering for MBT 5270 - Cable version
© Danfoss | Climate Solutions | 2021.02 AI298141313986en-000201 | 5
Type MBT 5270
Measuring range Connection
-50 – 150 °C
0 0
2-wire
-50 – 200 °C
1
9
Other
-50 – 300 °C
2
Other
9
Plug
F
M12 x 1
Resistance value
1 × Pt 100
0
1 × Pt 1000
2
NTC 2000, B25/85 2880 - 4570
6
NTC 2700, B25/85 2880 - 4570
K
NTC 3000, B25/50 3499
A
NTC 5000, B25/100 3988
L
Other (e.g. NTC)
9
Tolerance Insert
EN 60751 Class B
0
0
Fixed
± 1%
1
± 2%
2
Process connection
± 3%
3
H
M8 x 1,25
Other
9
NTC characteristic
No NTC
0
Other
9
Protection tube
Acid-Proof Steel, AISI 316
1
Other
9
Insertion length (80 mm max)
24 mm
0 2 4
28 mm
0 2 8
40 mm
0 4 0
Other (21 – 80)
x x x
Temperature sensor, Type MBT 5270
Integrated plug version
Figure 8: Ordering for MBT 5270 - Integrated plug version
© Danfoss | Climate Solutions | 2021.02 AI298141313986en-000201 | 6
File name
Document type
Document topic
Approval authority
084R1022.01
Manufacturers Declaration
China RoHS
Danfoss
TAA000006F Rev. 2
Marine - Safety Certicate
–
DNV GL
097R0004.01
Manufacturers Declaration
RoHS
Danfoss
Temperature sensor, Type MBT 5270
Certicates, declarations, and approvals
The list contains all certicates, declarations, and approvals for this product type. Individual code number may have
some or all of these approvals, and certain local approvals may not appear on the list.
Some approvals may change over time. You can check the most current status at danfoss.com or contact your local
Danfoss representative if you have any questions.
Table 12: MBT 5270
© Danfoss | Climate Solutions | 2021.02 AI298141313986en-000201 | 7
Online support
Danfoss oers a wide range of support along with our products, including digital product information, software,
mobile apps, and expert guidance. See the possibilities below.
The Danfoss Product Store
The Danfoss Product Store is your one-stop shop for everything product related—no matter where
you are in the world or what area of the cooling industry you work in. Get quick access to essential
information like product specs, code numbers, technical documentation, certications, accessories,
and more.
Start browsing at store.danfoss.com.
Find technical documentation
Find the technical documentation you need to get your project up and running. Get direct access to
our ocial collection of data sheets, certicates and declarations, manuals and guides, 3D models
and drawings, case stories, brochures, and much more.
Start searching now at www.danfoss.com/en/service-and-support/documentation.
Danfoss Learning
Danfoss Learning is a free online learning platform. It features courses and materials specically
designed to help engineers, installers, service technicians, and wholesalers better understand the
products, applications, industry topics, and trends that will help you do your job better.
Create your Danfoss Learning account for free at www.danfoss.com/en/service-and-support/learning.
Get local information and support
Local Danfoss websites are the main sources for help and information about our company and
products. Find product availability, get the latest regional news, or connect with a nearby expert—all
in your own language.
Find your local Danfoss website here: www.danfoss.com/en/choose-region.
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its
products without notice. This also applies to products already on order provided that such alterations can be made without subsequential
changes being necessary in specications already agreed. All trademarks in this material are property of the respective companies. Danfoss and
the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
© Danfoss | Climate Solutions | 2021.02 AI298141313986en-000201 | 8
Loading...