Danfoss MBT 5252 Installation guide

Installation Guide

Temperature sensor type MBT 5252

<![if ! IE]> <![endif]>084R9303	Identification
	Code number	Elements	Specification code
	084Z3101	1 × Pt 100	0004-0500-4J00-0000
	084Z3102	2 × Pt 100	0104-0500-4J00-0000
	084Z2185	2 × Pt 1000	0304-0500-4J00-0000

Pos. 1 Protection tube, AISI 316 Ti

Pos. 2 Measuring insert, Pt 100, Silicon cable, max. 200 °C, 40 mm steel tube

Pos. 3 Type B-head, Silumin

Pos. 4 Process connection, Brass with spring

Pos. 5 Clamping ring, Brass

Pos. 6 Union nut, Brass

Pos. 7 Union, Brass

Pos. 8 Clamping ring, Brass

Pos. 9 Support plate, Brass

Pos. 10 Terminal block

Pos. 11 Bush, Brass

Pos. 12 Gasket, Copper

<![if ! IE]>

<![endif]>084R9303

© Danfoss A/S (IA-MS/IM), 2013-10

IC.PI.P30.E4.02 - 520B5833

1

Mounting

1. Cut the protection tube in the right lenght

3. Mount protection tube and terminal block in the B-head

2. Cut the wire in the right lenght and mount the wires on the

4. Mount pos. 4 losely in the gearbox

terminal block

5. Mount and tighten the protection tube

084Z3101	10-12 Nm
Jumper

084Z3102

6. Tighten pos. 4

Jumper

Red+black

White

White+black

Red	Jumper

	7. Check the spring function
2	IC.PI.P30.E4.02 - 520B5833	© Danfoss A/S (IA-MS/IM), 2013-10