Danfoss MBD 1000 Data sheet

Data Sheet

Display Type MBD 1000

For pressure/temperature transmitters with output 4-20 mA

A plug-in display that can be universally applied to all MBS, AKS and MBT transmitters with a 4–20 mA output and a plug connection according to EN 175301-803-A.

The MBD 1000 is simply inserted between the transmitter and its connector by means of the integral DIN cubic plug adaptor.

Measurement range, decimal point and ltering can be comfortably adjusted with 3 push-button keys after removal of the front cover.

The display provides a simple and eective solution for local monitoring of pressure and temperature.

Features

• Polarity protected

• No auxiliary energy source required

• Can be tilted to any position

• High accuracy and minimal temperature drift

• Easy installation

• Displaying transmitter output

• CE approved

AI185786420583en-000401

Input signal

4–20 mA (2-wire)

Max. allowed input current

40 mA

Reverse voltage protection

Polarized installation

Voltage drop

Approx. 3 V

Display

10 mm high LCD-display

Display range

Start and end value freely programmable

Maximum display value

9999

Minimum display valaue

-1999

Decimal point

Any position

Measuring accuracy

0.2% ± 1 digit

Temperature drift

100 ppm / °C

Measuring interval

Approx. 3 measurements / sec.

Filtering

Selectable in 3 stages

Nominal temperature

25 °C

Ambient temperature

0 – 50 °C

Humidity

0 – 80% RH (non condensing)

Electromagnetic compatibility additional error

According to EN61000-6-2 and EN61000-6-3 < 1%

Housing Dimensions

ABS. Front screen made of polycarbonate

48.5 x 48.5 x 35.5 mm (L x W x D)

Electrical connection

EN 175301-803-A

IP rating

IP65

Pin1Supply +

Supply –

3NCConnection to transmitter housing

Display, type MBD 1000

Product specication

Technical specications

Table 1: Performance (EN 60770)

Electrical connection

Figure 1: 4-pin adaptor plug

Pin assignment of 4-pin adaptor plug according to EN 175301-803-A

+ 2 hidden pages