Danfoss ITC, ITL, ITD Installation guide
Installation Instructions
ITC, ITL & ITD Immersion Thermostats
ITC ITL ITD
Control Limit
Control
Limit
1
Installation Instructions
Thermostats ITC Control ITC Control
(tamperproof)
Order Codes 099-1057 099-1058 099-1059 099-1061 099-1062
Control Function (Thermal
Reset)
Limit Function (Manual Reset)
Dual Control and Limit Function
Temperature Range (°C) 0-90 0-90 0-90 0-90
Temperature Range (Limit) 90-110°C, Factory set to 90°C 90-110°C, Factory
Switching Differential 4 ± 1K 4 ± 1K - 4 ± 1K
Switch Configuration SPDT SPDT SPST SPDT (control), SPST (limit)
Switch Voltage Rating 220/240 Vac
Switch Current Rating 10 (2.5) A
Max. Ambient Temperature
(Head)
Max. Medium Temperature 150°C 150°C 150°C 150°C
Supplied with ½” BSP(m) x
100mm Pocket
Dimensions of
Thermostat Head
(mm)
Wide
High
Deep
l l l
65°C 65°C 80°C 80°C
l l l l
55
110
55.5
55
110
55.5
ITL Limit ITD Dual ITD Dual
l l
l
set to 80°C
55
110
56.5
100
110
56.5
Please note that on ITD model, code 099-1062, the temperature range of the limit thermostat is set at 80ºC and cannot be
altered.
Danfoss Randall can accept no responsibilty for possible errors in catalogues, brochures and other printed material. Danfoss Randall reserves the right to alter its products without notice.
This also applies to products already on order provided that such alterations can be made without subsequent changes being necessary in specifications already agreed.
Danfoss Randall Ltd
Ampthill Road
Bedford, MK42 9ER
Tel: (01234) 364621 Fax: (01234) 219705
Email: danfossrandall@danfoss.com
Website: www.danfoss-randall.co.uk
Part No: 2098v07 03/10
Loading...