Danfoss Icon Display User guide
User Guide
Danfoss Icon™ Display
Room Thermostat, 230 V
Introduction
Wake up
the thermostat
Set the temperature
Reset to default factory settings
Danfoss Icon™ Display is a room thermostat especially designed for floor heating systems. It comes in four different designs to suit markets worldwide.
Danfoss Icon™ Display is very intuitive and easy to use. Just set your desired comfort temperature, and the thermostat will control the room temperature in accordance with your setting.
Touch the screen to wake up Danfoss Icon™ Display.
The actual room temperature is displayed. The Heating icon 
is displayed, if the thermostat has turned on the heat.
Touch 
to return to the previous screen.
The screen turns off after 10 seconds without any action.
Wake up the thermostat
Touch 
or 
to set the desired room temperature.
The temperature flashes to indicate setting is in progress.
Confirm your setting by touching 
.
Press 
and 
simultaneously for at least 3 seconds to reset Danfoss Icon™ Display to the default factory settings.
The display toggles between 
and 
. Confirm by touching 
.
VUMBB102 |
© Danfoss | FHH | 2016.09 | 1 |
Menus
Wake up the thermostat. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
||
Press |
for 3 seconds to open the User menus |
|
and |
. |
|
|
||
Toggle the menus with |
or . |
|
|
|
|
|
|
|
Choose menu with . |
|
|
|
|
|
|
|
|
(To open the Installer menus |
and |
, press |
|
again for 3 seconds). |
|
|||
|
|
|||||||
Temperature limitation
and 
toggles with the temperature on the screen. Set highest temperature with 
or 
.
and 
toggles with the temperature on the screen. Set lowest temperature with 
or 
.
Confirm your choice with 
.
Default temperature range: 5 to 35° C.
Product ID
Production code.
Menu 3 and 4 are only relevant for the installer
Set actuator type
Choose between Normally Closed 
or Normally Open 
with 
or 
.
Confirm with 
.
Set heat emission characteristics of the floor
Choose Fast 
, Medium 
or Slow 
heat emission characteristics with 
or 
.
Confirm with 
.
Danfoss A/S
Floor Heating Hydronics • Ulvehavevej 61 • DK-7100 Vejle • Denmark • Phone: +45 7488 8500 • Fax: +45 7488 8501 heating@danfoss.com • www.floorheating.danfoss.com
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed.
All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
2 | © Danfoss | FHH | 2016.09 |
VUMBB102 |
Loading...