Danfoss Icon App module Data sheet

Data Sheet

Danfoss Icon™ App module

Description

Ordering

Danfoss Icon™ App Module is used to enable wi
and APP control on the Danfoss Icon™ 24V Master
Controller.

The App Module is connected using a shielded
patch cable (2 m cable included in box).

Once connected to a smart phone or tablet the
system can be shared across devices in the house­hold.

App Module will enable:

• Remote access

• Scheduling

• Away, comfort and holiday mode

• System alarms on your device e.g. low battery on
thermostat

Product Code number

Danfoss Icon™ App Module 088U1101

VDMCC102

© Danfoss | FEC | 2018.12 | 1

Tecnical data

Purpose of control Wi-Fi transmitting and receiving device,

incl. Bluetooth

Ambient temperature range, continious use 0 °C to +40 °C

Frequency 2,4 GHz

Encapsulation (IP Class) IP 20

Conformity declared acc. to following directives RED, RoHS, WEEE

Protection class Radio Class III

Supply voltage 5 VDC

Temperature for the ball pressure test 75 °C

Control polution degree Degree 2, normal household environment

Software class Class A

Rated impulse voltage 4 kV

Operating time Permanently connected

Temperature range, storage and transportation -20 °C to +65 °C

Dispossal instructions The product must be disposed as electronic

waste.

Drawings

125

29 69

Danfoss Icon™ App Module 088U1101

2 | © Danfoss | FEC | 2018.12

AI289338247790en-000101 | VDMCC102