Danfoss Icon 230V Wiring Center Data sheet

Data Sheet

Danfoss Icon™ 230V Wiring Center

Description

Ordering

Danfoss Icon™ 230V Wiring Center is a connection
box for use in hydronic oor heating using 230V
thermostats and actuators.

The Icon™ 230V Wiring Center can connect up
to 14 thermal actuators from up to 8 room ther­mostats. It is provided with 230V Live circulation
pump output and a voltage-free relays for control­ling a boiler. The relays are activated when one or
more thermostats require heat.

Product Type of plug Code number

Danfoss Icon™ 230V Wiring Center, 8 ch. F 088U1040

Danfoss Icon™ 230V Wiring Center, 8 ch., CH J 088U1041

Danfoss Icon™ 230V Wiring Center, 8 ch., NP — 088U1042

The Wiring Center also supports away and cooling
mode which can be controlled by a 230 V signal as
well as LED’s to indicate when outputs are active.

Mounting is made easy due to a simple layout of
the terminals and clear marking on the screw ter­minals. Mounting can be done by using screws.

© Danfoss | FEC | 2020.12

AI364356068139en-000101 | 1

Data Sheet Danfoss Icon™ 230V Wiring Center

Technical data

Max. number of thermostats 8

Max number of actuators 14

Supported actuator types Normally closed (NC)

Internal fuse 3 A

Conforms with diectives LVD, EMC, RoHs, WEEE

Supply voltage 220-240 V AC

Supply frequency 50/60 Hz

Output voltage, actuators 230 V AC

Ambient temp. range, operation 0 °C to 50 °C

Storage temp. range −20 °C to +60 °C

Output relay, pump 230 V Max. 100 W

Output relay, boiler Voltage-free Max. 2 A

Output cooling 230 V when active

Output Setback 230 V when active

Input Cooling External switch input (230 V rating)

Input setback External switch input (230 V rating)

Rated impulse voltage 4 kV

Temperature for ball pressure test 75 °C

Control pollution degree Pollution degree 2

Disposal instructions As electronic waste

2 | © Danfoss | FEC | 2020.12

AI364356068139en-000101