Danfoss ICF 15, ICF 20, ICF 25, ICF 50, ICF 65 Data sheet

Page 1

Data sheet

Valve station ICF 15, ICF 20, ICF 25, ICF 50 and ICF 65

Based on advanced technology the ICF valve station incorporates several functions in one housing, which can replace a series of conventional mechanical, electro-mechanical and electronically operated valves.

This valve station not only provides a number of advantages in the design phase of a refrigeration plant but also in the installation, service and maintenance.

The ICF valve stations are designed for low and high pressure refrigerants and can be used in pumped liquid lines, liquid injection lines, liquid drain lines and hot gas lines.

Supplied as a complete assembly, it is fully tested at high pressure and its functions are tested under factory controlled conditions.

Features • Designed for industrial refrigeration

applications for a maximum working pressure of 52 bar/754 psig. (For ICF with ICFD defrost module; see Technical Data, Pressure)

• Applicable to HCFC, non ﬂammable HFC, R717 (Ammonia) and R744 (CO2). The use of ICF valve stations with ﬂammable hydrocarbons is not recommended.

• Direct weld connections (No leaks through ﬂanges)

• Connection types include butt weld and socket weld.

• Low temperature steel housing.

• Low weight and compact design.

Nominal bore

Classiﬁed for Fluid group I

Category Article 4, paragraph 3 II

One code number equals one application solution.

• V-port regulating cones on the control modules ensure optimum regulating accuracy particularly at part load.

• Modular Concept Each housing is available with several diﬀerent connection types and sizes. Valve service is performed by replacing the function module.

• Side ports for the connection of pressure gauges, transmitters, sight glasses, service valve etc.

• UL approved

ICF valve station

DN≤ 25 (1 in.)

DN 32-65 (1¼ – 2½ in.)

AI251686497769en-US1201 | 1

Page 2

Data sheet | Valve station, ICF 15, ICF 20, ICF 25, ICF 50 and 65

Contents Page

Features............................................................................................1

Technical data ......................................................................................3

Design .............................................................................................3

Description of the function modules for ICF 15 and 20 ...............................................7

Description of the function modules for ICF 25 ......................................................8

Description of the function modules for ICF 50 and ICF 65............................................9

Material speciﬁcation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Code number selection ........................................................................... 19

Application examples............................................................................. 20

Connections...................................................................................... 23

Ordering ICF valve station......................................................................... 24

Dimensions ...................................................................................... 41

2 | AI251686497769en-US1201

Page 3

Data sheet | Valve station, ICF 15, ICF 20, ICF 25, ICF 50 and 65

Technical data

• Refrigerants Applicable to HFC, R717 (Ammonia) and R744 (CO₂). The use of lCF valve stations with ﬂammable hydrocarbons is not recommended.

Exception:

ICFD is released for ammonia and CO₂ refrigerants. ICFD 20 - ammonia version ICFD 20C - CO₂ version Only approved for land-based applications only.

• Temperature range ICF complete platform

-60/+120 °C (-76/+ 248 °F)

Exceptions:

ICM: If the ICM module is going to be used in liquid refrigerant with a temperature above 75 °C (167 °F)please contact Danfoss. ICFD 20: -50/+50 °C (-58/+122 °F) at 28 bar (406 psig) ICFD 20C: -50/+50 °C (-58/+122 °F) at 52 bar (754 psig)

• Ambient temperature for ICF with ICAD:

-30/+50 °C (-22/+122 °F)

• Surface protection The external surface is zinc-TLP treated to provide corrosion protection according to EN ISO 2081:2009 Additional on-site corrosion protection is recommended.

• Pressure The general ICF is designed for: Max. working pressure: 52 bar (754 psig)

ICFD 20 (Ammonia): For ICF with ICFD module the max. working pressure is 28 bar/406 psig. If the refrigeration system include ICFD 20 module, a test pressure of the system must not exceed 28 bar/406 psig, unless the ICFD ﬂoat is temporarily taken out before test.

ICFD 20C (CO₂): For ICF with ICFD 20C module the max. working pressure is 52 bar/754 psig. If the refrigeration system include ICFD 20 module, a test pressure of the system must not exceed 52 bar/754 psig, unless the ICFD 20C ﬂoat is temporarily taken out before test.

Max. working pressure for ICFD without ﬂoat: 52 bar (754 psig).

Maximum diﬀerential pressure:

ICFD 20: 15 bar/218 psig. For higher diﬀerential pressure, please contact Danfoss ICFD 20C: 36 Bar/522 psig

Design The main components of the ICF valve station are:

• A housing

• A maximum of four or six function modules (ICF 65 - max. 3)

- In all ICF 15 the modules M1 and M2 are predeﬁned as shut-oﬀ valve and strainer module.

- In all ICF 50 the modules M1 and M2 are predeﬁned as shut-oﬀ valve and blind cover (prepared for strainer).

- In all ICF 65 the module M1 is predeﬁned as shut-oﬀ valve

AI251686497769en-US1201 | 3

Page 4

Data sheet | Valve station, ICF 15, ICF 20, ICF 25, ICF 50 and 65

Housing

ICF 15-4 ICF 20-4 ICF 20-6

ICF 25-4 ICF 25-6

Function modules

ICF 50-4 ICF 65-3

Each housing accommodates a maximum of four or six function modules (ICF 65 max. 3), of the following types:

• Shut-oﬀ valve module

• Manual regulating valve module

• Strainer module

• Solenoid valve module

• Electronic expansion valve module

• Manual opening module

• Check valve module

• Stop & check valve module

• Pilot operated servo valve module

The design allows maximum capacity and minimum pressure drop, using advanced technology and double seats – oﬀering higher capacity than conventional systems using individual valves and components.

The ICF valve station is multifunctional.

ICF valve station oﬀers compact dimensions and shortened installation time due to the reduced number of direct welded connections.

Supplied as a complete assembly, it is leak tested at high pressure and its functions are tested under factory controlled conditions.

Connections There is a wide range of connection types and sizes available with ICF valve stations:

• D: Butt weld, DIN (EN 10220)

• A: Butt weld, ANSI (ASME B 36.10M SCHEDULE

80) A: Butt weld, ANSI (ASME B 36.19 SCHEDULE 40)

• SOC: Socket weld, ANSI (B 16.11)

• Defrost drain module

• Motor operated valve module

• External welding connection module

• Blind top cover

Optional:

The housings are supplied with a predeﬁned number of side ports for the following options:

• Sight glass

• Temperature or pressure sensor

• Pressure gauge

• Side exit for drain or bypass.

Approvals

The ICF concept is designed to fulﬁl global refrigeration requirements. For speciﬁc approval information, please contact Danfoss.

Housing and function module material

Low temperature steel

When using TIG/MIG/SMAW welding technology, it is possible to install the ICF valve station without prior removal of the function modules from the housing. If using other welding methods the modules must be removed during welding.

Please consult the product instruction for more details.

4 | AI251686497769en-US1201

Page 5

Data sheet | Valve station, ICF 15, ICF 20, ICF 25, ICF 50 and 65

Module and side port arrangement

ICF 15-4

ICF 20-4, 25-4

ICF 20-6, 25-6

ICF 50-4

P1/3

P2/5 P3/6

P2/7

P2/4

P4/9

Flow in an ICF 15-4

Flow in an ICF 20-4, 25-4

Flow in an ICF 20-6, 25-6

P5/10

Flow in an ICF 50-4

ICF 65-3

P1/3

Flow in an ICF 65-3

P2/4

AI251686497769en-US1201 | 5

Page 6

Data sheet | Valve station, ICF 15, ICF 20, ICF 25, ICF 50 and 65

Module and side port arrangement (continued)

All ICF 15-4 DIN, ANSI and Socket connections. 2 side ports - right hand side in ﬂow direction.

All ICF 20/25-4 DIN, ANSI and Socket connections. 4 side ports - 2 opposite on each side.

Example: ICF 15-4-8 DIN

All ICF 20/25-6 DIN, ANSI and Socket connections. 6 side ports - 3 opposite on each side

Drain Plug Thread: Please refer to Material speciﬁcation section page 11 - 19

Example: ICF 20-6-5MB DIN

3/8 in. G for DIN and ANSI connections 3/8 in. NPT for SOC connections

Drain Plug Thread: Please refer to Material speciﬁcation section page 11 - 19

3/8 in. G for DIN and ANSI connections 3/8 in. NPT for SOC connections

Example: ICF 25-4-9 SOC

All ICF 20/25-6 DIN, ANSI and Socket connections. 6 side ports - 3 opposite on each side.

Drain Plug Thread: Please refer to Material speciﬁcation section page 11 - 19

Example: ICF 20-6-2HRB SOC

3/8 in. G for DIN and ANSI connections 3/8 in. NPT for SOC connections

Drain Plug Thread: Please refer to Material speciﬁcation section page 11 - 19

3/8 in. G for DIN and ANSI connections 3/8 in. NPT for SOC connections

All ICF 50-4 DIN, ANSI and Socket connections. 4 side ports 2 opposite on each side

Example: ICF 50-4-42S50 SOC

6 | AI251686497769en-US1201

M33 x 1.5 for all connections

3/8 in. G for DIN connections 3/8 in. NPT for SOC connections

All ICF 65-3 DIN and ANSI connections. 4 side ports 2 opposite on each side

M33 x 1.5 for all connections

3/8 in. G for DIN connections 3/8 in. NPT for ANSI connections

Example: ICF 65-3-43MA DIN

Page 7

Data sheet | Valve station, ICF 15, ICF 20, ICF 25, ICF 50 and 65

Description of the function modules for ICF 15 and 20

ICF 15 and ICF 20 have the same function modules except for the two ﬁxed modules M1 (stop valve ICFS 15) and M2 (ﬁlter ICFF 15) in ICF 15.

ICFS 15 / ICFS 20

Shut-oﬀ valve module

This module has the function of a stop valve, and has a red cap.

ICFR 20A

Manual regulating valve module

This module has the function of a hand regulating valve, and has a yellow cap.

ICFF 15/20 / ICFF 20E

Strainer module

This module functions as a strainer. ICF 15, all connections:

Strainer element 150µ (100 mesh) 60 cm2 (9.3 in2) ICF 20, with DIN/ANSI connections: Pleated 150µ (100 mesh) 45 cm2 (7.0 in2)

ICF 20 with SOC connections (ICFF 20E): Pleated 150 (100 mesh) / 160 cm2 (24.8 in2)

ICFE 20

Solenoid valve module

This module has the function of a normally closed solenoid valve for controlling the refrigerant ﬂow.

ICFA 20

Electronic expansion valve module

This module has the function of an electronic pulse width modulating (PWM) expansion valve.

ICFS 15/ICFS 20 ICFR 20A

ICFF 15/20 / ICFF 20E

ICFE 20 / ICFA 20

ICFC 20 / ICFC 20P1

ICFC

Standard check valve module.

ICFC 20P1

Loaded check valve module Opening pressure of approx. 0,5 bar, and is fully open at 0,7 bar.

ICFN 20

Stop & check valve module

This module has the function of a combined stop and check valve, and has a green cap.

ICM 20-A, B or C

Motor operated valve module

This module is a stepper motor actuator valve for on/oﬀ and modulating control of the refrigerant ﬂow.

ICF 15 and ICF 20

ICFC 20

ICFN 20

ICM 20-A, B or C

ICFO 20

Manual opening module

This module facilitates the manual opening of the solenoid valve (type ICFE).

ICFE 20H

Solenoid valve module with integrated manual opener

This module has the function of a normally closed solenoid valve for controlling the refrigerant ﬂow.

ICFD 20 / ICFD 20C

Float operated valve module. This module opens for liquid ﬂow when the ﬂoat is lifted by the internal liquid level.

ICFD 20 - ammonia version ICFD 20C - CO version

ICFO 20

ICFE 20H

ICFB 20

Blind top cover

This provides a blanking cover for unused module ports.

ICFW 20

Welding module 20 DIN or ¾” SOC

This module is used for drain connection during hot-gas defrosting - in case of high capacity.

Please note:

At about 10% of maximum mass ﬂow of ICFE 20H, the pressure diﬀerential correspond to about 0.07 bar/1 psi. ICFE 20H will start to open at these conditions. At a pressure diﬀerential of minimum 0.2 bar/2.9 psi ICFE 20H will be 100% open.

ICFB 20

ICFW 20

AI251686497769en-US1201 | 7

Page 8

Data sheet | Valve station, ICF 15, ICF 20, ICF 25, ICF 50 and 65

Description of the function modules for ICF 25

ICFS 25

Shut-oﬀ valve module

This module has the function of a stop valve, and has a red cap.

ICFS 25

ICFC 25

Check valve module

This module has the function of a check valve.

ICFC 25

ICFN 25

Stop & check valve module

This module has the function of a combined stop and check valve, and has a green cap.

ICFR 25, A or B

Manual regulating valve module

This module has the function of a hand regulating valve, and has a yellow cap.

ICFF 25 / ICFF 25E

Strainer module

This module functions as a strainer. Strainer size:

ICF with DIN and ANSI (ICFF 25) connections: Pleated 150µ (100 mesh) / 160 cm2 (24.8 in2)

ICF with SOC connections (ICF 25E): Pleated 150 (100 mesh) / 330 cm2 (51.2 in2)

ICFE 25

Solenoid valve module

This module has the function of a normally closed solenoid valve for controlling the refrigerant ﬂow.

It has a built-in manual opening function.

ICF 25

ICFR 25

ICFF 25 / ICFF 25E

ICM 25-A or B

Motor operated valve module

This module is a stepper motor actuator valve for on/oﬀ and modulating control of the refrigerant ﬂow.

ICFW 25

Welding module, 25 DIN or 25 (1”) SOC

This module is used for drain connection during hot-gas defrosting - in case of high capacity.

ICFN 25

ICM 25-A or B

ICFW 25

ICFE 25

Please note:

At about 10% of maximum mass ﬂow of ICFE 25, the pressure diﬀerential correspond to about 0.07 bar/1 psi. ICFE 25 will start to open at these conditions.

At a pressure diﬀerential of minimum 0.2 bar/2.9 psi ICFE 25 will be 100% open.

ICFB 25

Blind top cover

This provides a blanking cover for unused module ports.

ICFB 25

8 | AI251686497769en-US1201

Page 9

Data sheet | Valve station, ICF 15, ICF 20, ICF 25, ICF 50 and 65

Description of the function modules for ICF 50 and ICF 65

SVA-S 50 / SVA 65

Shut-oﬀ valve module

This module has the function of a stop valve, and has a red cap.

SVA-S 50 / SVA-S 65

REG-SB 50 / REG-SB 65

Manual regulating valve module

This module has the function of a hand vulating valve, and has a yellow cap.

REG-SB 50 / REG-SB 65

ICFB 50

Blind cover

Prepared for insert of strainer (see below)

ICS 50 / ICS 65

Pilot-operated valve module

This module has the function of a pilot-operated valve for on/oﬀ and modulating control of the refrigerant ﬂow.

All ICS modules are 3-pilot versions. They are supplied with two blanking plugs (A) and one sealing plug (B).

ICS 50 and 65 inserts are available in diﬀerent capacities:

ICS 50: ICS 65:

ICS 50 ICS 65 ICS 50-32 ICS 65-40 ICS 50-40 ICS 80

ICM 50 / ICM 65 - A or B

Motor operated valve module

This module is a stepper motor actuator valve for on/oﬀ and modulating control of the refrigerant ﬂow.

ICF 50 and ICF 65

ICS 50 / ICS 65

ICFB 50

FIA 50 (option)

Strainer insert

Please order FIA 50 strainer insert and element from the FIA part programme. For further information please consult the data sheet for FIA strainers.

FIA 50

Available elements: See below.

Strainer

insert

100µ

150 mesh

148H3157 148H3130 148H3138 148H3144 148H3179 148H3184 148H3189

Strainer

insert

150µ

100 mesh

Strainer

insert

250µ

72 mesh

Strainer

insert

500µ

38 mesh

Pleated

Strainer

insert 150µ

100 mesh

Pleated

Strainer

insert 250µ

72 mesh

Pleated

Strainer

insert 500µ

38 mesh

ICLX 50 / ICLX 65

2-step solenoid valve module

This module has the function of a normally closed gas powered solenoid valve for controlling the refrigerant ﬂow. It has a built-in manual opening function. ICLX is used in suction lines for opening in 2 steps after hot gas defrost.

ICSH 50/ICSH 65

2-step solenoid valve module

This module has the function of a normally closed solenoid valve for controlling the refrigerant ﬂow. It has a built-in manual opening function. ICSH is used in hot gas lines for the opening of hot gas defrost ﬂow to the evaporator in 2 steps.

ICM 50 / ICM 65 - A or B

ICLX 50 / ICLX 65

ICSH 50 / ICSH 65

AI251686497769en-US1201 | 9

Page 10

Data sheet | Valve station, ICF 15, ICF 20, ICF 25, ICF 50 and 65

Material speciﬁcation

ICF housing

ICF 15-4

Pos. Part Material EN* ASTM** JIS**

1 Housing Steel P285QH,

ICF 20-4, 25-4

ICF 20-6, 25-6

10222-4

LF2, A350

Pos. Part Material EN* ASTM** JIS**

1 Housing Cast steel low

ICF 50-4

temperature

ICF 65-3

Pos. Part Material EN* ASTM** JIS**

1 Housing Cast steel low

temperature

G20MN5QT EN 10213-3

LCC, A352

SCPL1, G5151

* EN: Primar y Design Standard ** ASTM, JIS: Equivalent Material Standard

10 | AI251686497769en-US1201

Page 11

Danfoss

27H245_10-2014

Danfoss

27H244 10-2014

Data sheet | Valve station, ICF 15, ICF 20, ICF 25, ICF 50 and 65

Material speciﬁcation

(continued)

ICFS 15 shut-oﬀ valve module

ICFS 20 shut-oﬀ valve module

Pos. Part Material EN* ASTM** JIS**

1 Bonnet, Flange Steel Steel G20Mn5QT, 10213-3

2 Bonnet, Insert Steel 11SMn30

3 Spindle Stainless steel X8CrNiS18-9

4 Cone Steel 11SMn30

5 Packing gland Stainless steel X8CrNiS18-9

6 Packing washer Aluminium

7 Bolts Stainless steel A2-70 Type 308 A2-70

8 Gasket Fiber,

Pos. Part Material EN* ASTM** JIS**

1 Spindle Stainless steel X8CrNiS 18-9

2 Thread part Stainless steel X8CrNiS 18-9

3 AL-gasket/

Refrig. gasket

4 Bonnet Steel S235JRG2

5 Hex-head bolt

M10 × 25

6 Flange Cast steel low tem-

7 Gasket Chloroprene

Non-asbestos

Stainless steel A2-70

perature

(Neoprene)

P285QH+QT, 10222-4 P275NL, 10028-3

10087

10088

10087

10088

EN 10088

AL99 alloy no. 1200 DIN 1712 BL.3

EN 10025

EN 24017

G20Mn5QT EN 10213-3

LCC, A352 LF2, A350

AISI 1213 Type 2

R 683/9

AISI 303 Type 17

683/13

AISI 1213 Type 2

R 683/9

AISI 303 Type 17

683/13

G4303 G4304

AL1200

A283 G3101

A320 A2-70

A352 G5152

ICFF 15 strainer module (strainer element 150 (100 mesh) 60 cm2 (9.3 in2)

Pos. Part Material EN* ASTM** JIS**

1 Strainer Stainless steel

2 Flange bonnet Steel G20Mn5QT,

3 Bolt Stainless steel A2-70 Type 308 A2-70

4 ICFF 15 bonnet Steel S355J2+N

5 Flat gasket Fiber, Non-asbestos

6 Plug

¼” RG for butt-weld 3/8” NPT for socket weld

7 Gasket - metal joint Aluminium

8 Wave spring Steel

Steel 11SMnPb30

10213-3 P285QH+QT, 10222-4 P275NL, 10028-3

1.0570 / 1.0577 EN 10025-2

LCC, A352

LF2, A350

ASTM A572-50

ICFF 20 strainer module

Pos. Part Material EN* ASTM** JIS**

1 Gasket AL 99 F11

2 Bonnet Steel S235JRG2

3 Hex-head bolt

* EN: Primar y Design Standard ** ASTM, JIS: Equivalent Material Standard

M10 × 25

4 Flange Cast steel low tem-

5 Gasket Chloroprene

6 Strainer

element

7 Plug Steel

8 Plug

¼” RG for butt-weld 3/8” NPT for socket weld

Stainless steel A2-70

perature

(Neoprene)

Stainless steel 150µ

Stainless steel A2-70

EN 10025

EN 24017

G20Mn5QT EN 10213-3

1.4301 A304 SUS304

EN 24017

A283 G3101

A320 A2-70

A352 G5152

A320 A2-70

AI251686497769en-US1201 | 11

Page 12

Data sheet | Valve station, ICF 15, ICF 20, ICF 25, ICF 50 and 65

Material speciﬁcation

(continued)

ICFF 20E extended strainer module

ICFE 20 solenoid valve module

ICFE 20H solenoid valve module

ICFO 20 manual opening module

Pos. Part Material EN* ASTM** JIS**

1 Dirt protection plug Steel 11SMn30

2 Bonnet Steel 11SMn30

3 Hex-head bolt

M12x80

4 Flange Steel P285QH:

5 Gasket Chloroprene

6 Strainer

element

7 Plug 3/8” NPT Steel 11SMn30

8 Strainer adaptor Steel 11SMn30

Pos. Part Material EN* ASTM** JIS**

1 Armature tube Stainless steel X2CrNi19-11

2 Armature tube nut Stainless steel X8CrNiS18-9

3 Flange Cast Steel low tem-

4 Gasket Chloroprene

5 Hex-Head bolt

M10 × 25

6 Seat High density polymer

Pos. Part Material EN* ASTM** JIS**

1 Piston Steel 11SM n30 EN

2 Seat Teﬂon

3 Piston ring

4 Bonnet cylinder Steel P285QH

5 Manual opener Steel

6 Armature tube Stainless steel X2CrNi19-11

7 Armature tube nut Stainless steel X2CrNi19-11

8 Gasket Chloroprene (Neo-

Pos. Part Material EN* ASTM** JIS**

1 Seal cap Steel DIN 1651-

2 Gland nut Steel DIN 1651

3 Seal cap gasket Nylon Polyamid A6Polyamid

4 Sealing ring Teﬂon PTFE PTFE PTFE

5 Rubber gasket Chloroprene rubber CR CR CR

6 Spindle Stainless steel X8CrNiS 18-9

7 Hex-head bolt

M10 × 25

8 Flange Cast steel low tem-

Stainless steel A2-70

(Neoprene)

Stainless steel 250µ

perature

(Neoprene)

Stainless steel A2-70

prene)

Stainless steel A2-70

perature

EN 10087

EN 1515-1

EN 10222-4 G20Mn5QT; EN 10213-3

1.4301 A304 SUS304

EN 10087

EN 10088

G20Mn5QT EN 10213-3

EN 24017

EN 10025

EN 10222

EN10028

EN10216

9SMn28 TLP surface treatment

9SMn28 Zinc Chromate Surface treatment

EN 10088

EN 24017

EN10222-4 P285QH

Grade 1213 A29

Grade B8 A320

LF2 - A350 LCC - A352

Grade 1213 A29

A352 G5152

A320 A2-70

A350 G3205

A320 A2-70

1213 (SAE) SUM 22

PA6

G4303 G4304

A320 A2-70

G4804

A2-70 B1054

SFL2 - G3205 SCPL1 - G5152

G4804

Polyamid PA6

SUS 303

* EN: Primar y Design Standard ** ASTM, JIS: Equivalent Material Standard

12 | AI251686497769en-US1201

Page 13

60N9029

Data sheet | Valve station, ICF 15, ICF 20, ICF 25, ICF 50 and 65

Material speciﬁcation

(continued)

ICFR 20 manual regulating valve module

ICFA 20 electronic expansion valve module

ICFC 20 check valve module

Pos. Part Material EN* ASTM** JIS**

1 Spindle Stainless steel X8CrNiS 18-9

2 Thread part Stainless steel X8CrNiS 18-9

3 AL-gasket AL99 alloy no. 1200

4 Bonnet Steel S235JRG2

5 Hex-head bolt

M10 × 25

6 Flange Cast steel low tem-

7 Gasket Chloroprene

8 Seat High density polymer

Pos. Part Material EN* ASTM** JIS**

1 Armature tube Stainless steel X2CrNi19-11

2 Armature tube nut Stainless steel X8CrNiS18-9

3 Hex-head bolt

M10 × 25

4 Flange Cast steel low tem-

5 Gasket Chloroprene

6 Adaptor Steel

Pos. Part Material EN* ASTM** JIS**

1 Bonnet Steel S235JRG2 A283 G3101

2 Hex-head bolt

M10 × 25

3 Flange Cast steel low tem-

4 Gasket Chloroprene

Stainless steel A2-70

perature

(Neoprene)

Stainless steel A2-70

perature

(Neoprene)

Stainless steel A2-70

perature

(Neoprene)

EN 10088

DIN 1712 BL.3

EN 10025

EN 24017

G20Mn5QT EN 10213-3

EN 10088

EN 24017

G20Mn5QT EN 10213-3

EN 24017

G20Mn5QT EN 10213-3

G4303 G4304

A283 G3101

A320 A2-70

A352 G5152

A320 A2-70

A352 G5152

A320 A2-70

A352 AG5152

* EN: Primar y Design Standard ** ASTM, JIS: Equivalent Material Standard

ICFC 20P1 check valve module

Pos. Part Material EN* ASTM** JIS**

Danfoss

1 Bonnet Steel S235JRG2 A283 G3101

2 Hex-head bolt

M10 × 25

3 Flange Cast steel low

4 Gasket Chloroprene

5 Seat High density polymer

ICFN 20 stop & check valve module

Pos. Part Material EN* ASTM** JIS**

1 Spindle Stainless steel X8CrNiS 18-9

2 Thread part Stainless steel X8CrNiS 18-9

3 AL-gasket AL99 alloy no. 1200

4 Bonnet Steel S235JRG2

5 Hex-head bolt

M10 × 25

6 Flange Cast steel low tem-

7 Gasket Chloroprene

ICM 20-A, 20-B or 20-C motor operated valve module

Pos. Part Material EN* ASTM** JIS**

1 Adapter Stainless steel X5CrNi18-10

2 Hex-head bolt

M10 × 50

3 O-ring Chloroprene 4 Bonnet Cast steel low

5 Gasket Chloroprene

6 Seat High density polymer

Stainless steel A2-70

temperature

(Neoprene)

Stainless steel A2-70

perature

(Neoprene)

Stainless steel A2-70

temperature

(Neoprene)

EN 24017

G20Mn5QT EN 10213-3

EN 10088

DIN 1712 BL.3

EN 10025

EN 24017

G20Mn5QT EN 10213-3

EN 10088

EN 24014

G20Mn5QT EN 10213-3

A320 A2-70

A352 AG5152

G4303 G4304

A283 G3101

A320 A2-70

A352 G5152

A240 G4303

G4304

A320 A2-70

A352 G5152

AI251686497769en-US1201 | 13

Page 14

78109135

Data sheet | Valve station, ICF 15, ICF 20, ICF 25, ICF 50 and 65

Material speciﬁcation

(continued)

ICFD 20 / ICFD 20C defrost module

11 2 3 4

6 12

Danfoss

27H576_06-2017

ICFB 20 blind top cover

ICFW 20 welding module, 20 DIN or ¾” SOC

Pos. Part Material EN ASTM JIS

1 Inlet connector steel S235JR

2 O-ring Inlet connector Chloroprene

3 Valve Body Cast Iron EN -GJS- 400- 18-LT

4 Hex-head bolt M10x30 Stainless Steel A2-70

5 Union nut Stainless Steel X8CrNiS18-9

6 Hex-head bolt M10x35 Stainless Steel A2-70

7 Float Stainless Steel ICFD 20 : AISI 316

8 Float housing Stainless Steel S355J2+N

9 Drain plug ¼” G Steel 11SMnPb30

10 Float lever Steel S235JR

11 Rubber Gasket Chloroprene

12 Gasket Fibre, Non Asbestos

13 Gasket - Drain Plug AL 99F11

Pos. Part Material EN ASTM JIS

1 Hex-head bolt

M10 × 25

2 Flange Cast steel low

3 Gasket Chloroprene

Pos. Part Material EN ASTM JIS

1 Hex-head bolt

M10 × 25

2 Flange Cast steel low

3 Gasket Chloroprene

4 Weld connection Steel S355J2+N

(Neoprene)

Stainless Steel A2-70

temperature

(Neoprene)

Stainless Steel A2-70

temperature

(Neoprene)

EN 10025 - 2

EN 1563

EN 24017

EN 10088-3

EN 24017

ICFD 20C : AISI 304

EN 10025-2

EN 10087

EN 10025 - 2

EN 24017

G20Mn5QT EN 10213-3

EN 24017

G20Mn5QT EN 10213-3

EN 10025-2

A283 G3101

A320 A2-70

AISI303 SUS303

A320 A2-70

A572-50 SM490YB

A283 G3101

A320 A2-70

A352 G5152

A320 A2-70

A352 G5152

A572-50 G3106

SM49

* EN: Primar y Design Standard ** ASTM, JIS: Equivalent Material Standard

14 | AI251686497769en-US1201

Page 15

Data sheet | Valve station, ICF 15, ICF 20, ICF 25, ICF 50 and 65

Material speciﬁcation

(continued)

ICFS 25 shut-oﬀ valve module

ICFF 25 strainer module

Pos. Part Material EN* ASTM** JIS**

1 Spindle Stainless steel X8CrNiS 18-9

2 Thread part Stainless steel X8CrNiS 18-9

3 O-ring Chloroprene

4 Bonnet Steel S355J2+N

5 Hex-head bolt

M12 × 30

6 Flange Cast steel low tem-

7 Gasket Fiber non asbestos

Pos. Part Material EN* ASTM** JIS**

1 Al. Gasket AL 99 F11

2 Bonnet Steel S355J2+N

3 Hex-head bolt

M12 × 30

4 Flange Cast steel low tem-

5 Gasket Fiber non asbestos

6 Strainer

element

7 Plug

¼” RG for butt-weld 3/8” NPT for socket weld

Stainless steel A2-70

perature

Stainless steel A2-70

perature

Stainless steel 150µ

Stainless steel A2-70

EN 10088

1.0570 / 1.0577 EN 10025-2

EN 24017

G20Mn5QT EN 10213-3

1.0570 / 1.0577 EN 10025-2

EN 24017

G20Mn5QT EN 10213-3

1.4301 A304 SUS304

EN 24017

ASTM A572-50

A320 A2-70

A352 G5152

ASTM A572-50

A320 A2-70

A352 G5152

A320 A2-70

G4303 G4304

ICFF 25E extended strainer module

ICFE 25 solenoid valve module

Pos. Part Material EN* ASTM** JIS**

1 Dirt protection plug Steel 11SMn30

2 Bonnet Steel S355J2+N

3 Hex-head bolt

M12x140

4 Flange Steel P285QH:

5 Gasket Fiber non asbestos

6 Strainer

element

7 Plug 3/8” NPT Steel 11SMn30

Pos. Part Material EN* ASTM** JIS**

1 Armature tube Stainless steel X2CrNi19-11

2 Armature tube nut Stainless steel X8CrNiS18-9

3 Bonnet Cast steel low tem-

4 Gasket Fiber non asbestos

5 Hex-Head bolt

M10 × 25

6 Seat High density polymer

Stainless steel A2-70

Stainless steel 250µ

perature

Stainless steel A2-70

EN 10087

1.0570 / 1.0577 EN 10025-2

EN 1515-1

EN 10222-4 G20Mn5QT; EN 10213-3

1.4301 A304 SUS304

EN 10087

EN 10088

G20Mn5QT EN10213-3

EN 24017

Grade 1213 A29

ASTM A572-50

Grade B8 A320

LF2 - A350 LCC - A352

Grade 1213 A29

A352 G5152

A320 A2-70

G4804

A2-70 B1054

SFL2 G3205 SCPL1 G5152

A29

* EN: Primar y Design Standard ** ASTM, JIS: Equivalent Material Standard

AI251686497769en-US1201 | 15

Page 16

Data sheet | Valve station, ICF 15, ICF 20, ICF 25, ICF 50 and 65

Material speciﬁcation

(continued)

ICFR 25 manual regulating valve module, A or B

Pos. Part Material EN* ASTM** JIS**

1 Spindle Stainless steel X8CrNiS 18-9

2 Thread part Stainless steel X8CrNiS 18-9

3 O-ring Chloroprene

4 Bonnet Steel S355J2+N

5 Hex-head bolt

6 Flange Cast steel low tem-

7 Gasket Fiber non asbestos

8 Seat High density polymer

ICFC 25 check valve module

Pos. Part Material EN* ASTM** JIS**

1 Bonnet Steel S355J2+N

2 Hex-head bolt

3 Flange Cast steel low tem-

4 Gasket Fiber non asbestos

M12 × 30

EN 10088

1.0570 / 1.0577

Stainless steel A2-70

perature

Stainless steel A2-70

perature

EN 10025-2

EN 24017

G20Mn5QT EN 10213-3

1.0570 / 1.0577 EN 10025-2

EN 24017

G20Mn5QT EN 10213-3

G4303 G4304

ASTM A572-50

A320 A2-70

A352 G5152

ASTM A572-50

A320 A2-70

A352 AG5152

* EN: Primar y Design Standard ** ASTM, JIS: Equivalent Material Standard

ICFN 25 stop & check valve module

ICM 25-A or B motor operated valve module

Pos. Part Material EN* ASTM** JIS**

1 Spindle Stainless steel X8CrNiS 18-9

2 Thread part Stainless steel X8CrNiS 18-9

3 O-ring Chloroprene

4 Bonnet Steel S355J2+N

5 Hex-head bolt

M12 × 30

6 Flange Cast steel low tem-

7 Gasket Fiber non asbestos

Pos. Part Material EN* ASTM** JIS**

1 Adapter Stainless steel X5CrNi18-10

2 Hex-head bolt

M12 × 30

3 O-ring Chloroprene

4 Bonnet Cast steel low tem-

5 Gasket Fiber non asbestos

6 Seat High density polymer

Stainless steel A2-70

perature

Stainless steel A2-70

perature

EN 10088

1.0570 / 1.0577 EN 10025-2

EN 24017

G20Mn5QT EN 10213-3

EN 10088

EN 24014

G20Mn5QT EN 10213-3

ASTM A572-50

A320 A2-70

A352 G5152

A240 G4303

A320 A2-70

A352 G5152

G4303 G4304

G4304

16 | AI251686497769en-US1201

Page 17

148B323_09-2015

148B324_09-2015

Data sheet | Valve station, ICF 15, ICF 20, ICF 25, ICF 50 and 65

Material speciﬁcation

(continued)

ICFB 25 blind top cover

ICFW 25 welding module, 25 DIN or 25 (1”) SOC

SVA-S 50 / SVA-S 65 shut-oﬀ valve module

Danfoss

Pos. Part Material EN* ASTM** JIS**

1 Hex-head bolt

M10 × 25

2 Flange Cast steel low tem-

3 Gasket Fiber non asbestos

Pos. Part Material EN* ASTM** JIS**

1 Hex-head bolt

M10 × 25

2 Flange Cast steel low tem-

3 Gasket Fiber non asbestos

4 Weld connection Steel S355J2+N

Pos. Part Material EN* ASTM**

1 Spindle Stainless steel X8CrNiS18-9

2 Gasket for cap Nylon

3 Packing gland Stainless steel X8CrNiS18-9

4 Spring loaded Teﬂon

ring

5 Packing washer Aluminium

6 Bonnet Steel P285QH+QT,

7 Bolts Stainless steel A2-70 Type 308

8 Gasket Fiber, non

9 Cone Steel 11SMn30

10 Disk spring Steel

Stainless Steel A2-70

perature

Stainless Steel A2-70

perature

PTFE

asbestos

EN 24017

G20Mn5QT EN 10213-3

EN 24017

G20Mn5QT EN 10213-3

EN 10025-2

10088

EN 10222-4

10087

A320 A2-70

A352 G5152

A320 A2-70

A352 G5152

A572-50 G3106

SM49

AISI 303

LF2, A350

AISI 1213

REG-SB 50 / REG-SB 65 manual regulating valve module

Pos. Part Material EN* ASTM**

1 Spindle Stainless steel X8CrNiS 18-9, 17440 AISI 303

* EN: Primar y Design Standard ** ASTM, JIS: Equivalent Material Standard

Danfoss

2 Gasket for cap Nylon

3 Packing gland Stainless Steel X8CrNiS 18-9, 10088 AISI 303

4 Spring loaded Teﬂon

ring

5 Packing washer Aluminium

6 Bonnet Steel P285QH+QT

7 Bolts Stainless steel A2-70 Type 308

8 Gasket Fiber, non

9 Disk spring Steel

10 Cone Steel

PTFE

asbestos

10222-4

LF2 A350

AI251686497769en-US1201 | 17

Page 18

27H328_09-2015

27H329_09-2015

Data sheet | Valve station, ICF 15, ICF 20, ICF 25, ICF 50 and 65

Material speciﬁcation

(continued)

ICFB 50 blind top cover

Pos. Part Material EN* ASTM** JIS**

1 Gasket Fiber non asbestos

2 Flange Cast steel low tem-

3 Hex-head bolt

ICS 50 / ICS 65 pilot-operated valve module

Pos. Part Material EN* ASTM**

1 Bolts Stainless steel A2-70, EN 1515-1 Grade B8 A320

2 Bonnet Low temperature steel G20Mn5QT,

3 Gasket Fiber,

4 Piston Steel

5 Valve plate PTFE

ICM 50 / ICM 65 motor operated valve module

Pos. Part Material EN* ASTM**

1 Adaptor Stainless steel X5CrNi18-10

2 Bolts Stainless steel A2-70, EN 1515-1 Grade B8 A320

3 Bonnet Low temperature steel G20Mn5QT,

4 Gasket Fiber,

5 Piston Steel

6 Valve plate PTFE

M10 × 25

perature

Stainless Steel A2-70

non-asbestos

G20Mn5QT EN 10213-3

EN 24017

EN 10213-3 P285QH+QT EN 10222-4

EN 10088

EN 10213-3

A352 G5152

A320 A2-70

LCC A352 LF2, A350

A240

LCC A352

Danfoss

ICLX 50 / ICLX 65 2-step solenoid valve module

Pos. Part Material EN* ASTM**

1 EVM pilot NO

2 EVM pilot NC

3 Bonnet Low temperature steel P285QH,

4 Spring Stainless steel

5 Gasket Fiber,

* EN: Primar y Design Standard ** ASTM, JIS: Equivalent Material Standard

18 | AI251686497769en-US1201

Danfoss

6 Main piston Steel

7 Seat plate main PTFE

non-asbestos

EN 10222-4

LF2, A350

Page 19

Data sheet | Valve station, ICF 15, ICF 20, ICF 25, ICF 50 and 65

Material speciﬁcation

(continued)

* EN: Primar y Design Standard ** ASTM, JIS: Equivalent Material Standard

ICSH 50 / ICSH 65 2-step solenoid valve module

Pos. Part Material EN* ASTM**

1 EVM pilot NC

2 EVM pilot NC

3 Bonnet Low temperature steel P285QH,

4 Spring Stainless steel

5 Gasket Fiber,

6 Main piston Steel

7 Seat plate main PTFE

Danfoss

27H617_09-2017

non-asbestos

Code number selection To determine the correct ICF valve station follow steps 1 through 5.

Step 1 Determine application and function requirements:

– Line: Pumped liquid, Liquid Injection, Hot gas defrost, Liquid DX, Return line etc. – Control: On/oﬀ solenoid valve, motorised valve – Defrost: Electric or hot gas

From the above determine the application reference number (see page 24):

Step 2 Selection criteria - (Please use Danfoss calculation software)

Download the software from:

http://refrigerationandairconditioning.danfoss.com/support-center/apps-and-software/coolselector/

– Refrigerant – Capacity – Temperature – Circulation rate

EN 10222-4

LF2, A350

From the above determine the valve station required, e.g.: ICF 20 complete with ICM 20-C

Step 3 Establish connection sizes and type

– DIN butt-weld, ANSI butt-weld or SOC weld – 15 (½”), 20 (¾ in.), 25 (1 in.), 32 (1 ¼ in.) or , 40 (1½in.), 50 (2 in.), 65 (2½ in.) or 80 (3 in.)

Step 4 Establish code number

(see pages 25 to 37)

AI251686497769en-US1201 | 19

Page 20

Data sheet | Valve station, ICF 15, ICF 20, ICF 25, ICF 50 and 65

Example of application: Liquid feed line

A valve combination for a ﬂooded evaporator operating on/oﬀ from a thermostat and with electric defrost is required. Manual override of the solenoid valve is requested. Common ICF conﬁgurations for this kind of application is shown here:

EKC 202

From liquid separator

Not all valves are shown. Not to be used for construction purposes.

Example of application: Liquid feed line/ Hot gas defrost line

Evaporator with 2 stage gas powered valve ICLX in the suction line and hot gas defrost featuring: ICF liquid feed station and ICF Hot gas station with side port to power ICLX. ICS+CVP as a defrost regulator (OFV optional depending on capacity).

AKS 12

Evaporator

SVA

To liquid separator

ICFB

To liquid separator

From discharge line

CVP

ICS

From liquid separator

Not all valves are shown. Not to be used for construction purposes.

ICLX/GPLX

20 | AI251686497769en-US1201

Page 21

Data sheet | Valve station, ICF 15, ICF 20, ICF 25, ICF 50 and 65

Example of application: Liquid injection line

SVA

To compressor suction line

LLG

Not all valves are shown. Not to be used for construction purposes.

Liquid separator

SNV

SVA

To evaporator

A valve combination for liquid injection to separator with electronic injection valve is required. It is requested to have a solenoid valve in front of the control valve.

DSV

SFV

SVA

AKS 38

SVA

SFV

EKE 347

AKS 4100

SNV

From receiver

ICFB

From evaporator

SVA

Example of application: Liquid injection line

From separator/ evaporator

Not all valves are shown. Not to be used for construction purposes.

SVA

A valve combination for compressor liquid injection with electronic injection valve is required. It is a required to have a solenoid valve in front of the control valve.

FIA

Oil injection

Compressor

AKS 21

To oil separator

EKC 361

From receiver

AI251686497769en-US1201 | 21

Page 22

ICFS

SVA

Data sheet | Valve station, ICF 15, ICF 20, ICF 25, ICF 50 and 65

Example of application: Liquid feed line/Hot gas defrost line Return line/Defrost drain

Evaporator with 2 stage gas powered ICLX module in suction line ICF and ICF liquid feed valve station. Hot gas defrost featuring: ICF hot gas valve station with side port to power ICLX module and ICF drain station with ﬂoat activated liquid drainage to suction line ICF side port.

line

To liquid separator

From liquid separator

From discharge line

Not all valves are shown. Not to be used for construction purposes.

Note:

Restrictions to ICF drain station piping - please see AB236886443340

AK-CC 210

CHV

AKS 21

Evaporator

AKS 21

SVA

ICFD

ICFS

ICFE

ICLX

SVA

ICFR

22 | AI251686497769en-US1201

ICFF ICFC

SVA

ICFS

ICSH

Page 23

Data sheet | Valve station, ICF 15, ICF 20, ICF 25, ICF 50 and 65

Connections

D: Butt-weld DIN (EN 10220)

Size

15 ½ 21.3 1.3 0.839 0.052

20 ¾ 26.9 2.3 1.059 0.091

25 1 33.7 2.6 1.327 0.103

32 1¼ 42.4 2.6 1.669 0.102

40 1½ 48.3 2.6 1.902 0.103

50 2 60.3 2.9 2.37 0.11

65 2½ 76.1 2.9 3.00 0.11

80 3 88.9 3.2 3.50 0.13

Size

in.

A: Butt-weld ANSI (B 36.10) Butt weld ANSI (B 36.19)

SOC: Socket welding ANSI (B 16.11)

SD: Soldering (DIN 2856)

Size

15 ½ 21.3 2.7 0.839 0.105 80

20 ¾ 26.9 4.0 1.059 0.158 80

25 1 33.7 4.6 1.327 0.181 80

32 1¼ 42.4 4.9 1.669 0.193 80

40 1½ 48.3 5.1 1.902 0.201 80

65 2½ 73.0 5.2 2.87 0.20 40

80 3 88.9 5.5 3.50 0.22 40

Size

15 ½ 21.9 5.9 0.862 0.232 10.25 0.40

20 ¾ 27.2 4.6 1.071 0.181 13 0.51

25 1 33.9 7.2 1.335 0.284 13 0.51

32 1¼ 42.7 6.1 1.743 0.240 13 0.51

40 1½ 48.8 6.6 1.921 0.260 13 0.51

50 2 61.2 6.2 2.41 0.24 16 0.63

Size mm

22 22.08 16.5

Size

in.

Size

in.

Size

in.

ID in.

in.

Schedule

in.

SA: Soldering (ANSI B 16.22)

FPT: Female pipe thread, (ANSI/ASME B 1.20.1)

Size mm

(15) ½ (½ × 14 NPT)

Size

in.

/ 0.875 0.650

Size

in.

Inside pipe thread

ID in.

in.

AI251686497769en-US1201 | 23

Page 24

Data sheet | Valve station, ICF 15, ICF 20, ICF 25, ICF 50 and 65

Ordering ICF valve station

Label example:

Below Nomenclature show the generic conﬁguration and application by identiﬁcation of housing size, type and application group. This designation is often used for discussion on possible solutions and will be the ﬁnal identiﬁcation on the valve label (see label example)

ICF 20 - 6 - 3

Application reference number (see the below overview)

Number of module ports Housing size Type

For ordering, connection size and type must be chosen to get the ﬁnal identiﬁcation. The ﬁnal

identiﬁcation is done by code number only

(see next pages)

Application overview (generic conﬁguration - connection type and size excluded)

Application # Sequence of functions

M1 M2 M3 M4

Liquid feed

1 Liquid feed (No hotgas defrost) Shut-oﬀ Strainer Solenoid Man Open Regul. Shut-oﬀ 2 Liquid feed Shut-oﬀ Strainer Solenoid Man Open Regul. Stop & check 3 Liquid feed Shut-oﬀ Strainer Solenoid Check Regul. Shut-oﬀ 10 Liquid feed (No hotgas defrost) Shut-oﬀ Strainer Solenoid Regul. 15 Liquid feed w. external Conn. Shut-oﬀ Strainer Solenoid Check Welding Regul.

Solenoid common

4 Solenoid - Liquid & Hot gas lines Shut-oﬀ Strainer Solenoid Man Open Shut-oﬀ 8

Solenoid - Liquid & Hot gas lines Shut-oﬀ

Strainer

Solenoid Man Open

Liquid injection

5 Liquid injection (expansion) Shut-oﬀ Strainer Solenoid Man Open Motor Shut-oﬀ 12 Liquid injection (expansion) PWM Shut-oﬀ Strainer El. Exp. Shut-oﬀ 14 Liquid injection (expansion) Shut-oﬀ Strainer Motor Shut-oﬀ

Hot gas defrost

9 Hot gas defrost Shut-oﬀ Strainer Solenoid Shut-oﬀ

Hot gas defrost (ICF 50 only)

47 Hot gas defrost - On/Oﬀ 2-step solenoid Shut-oﬀ Strainer option* Solenoid Shut-oﬀ 48 Hot gas defrost - On/Oﬀ 2-step solenoid + manual Regulating Shut-oﬀ Strainer option* Solenoid Regul.

* ICF 50 only

Solenoid multiple evaporators

11 Solenoid - Multiple evaporators Shut-oﬀ Strainer Solenoid Check 18 Solenoid - Multiple evaporators Shut-oﬀ Strainer Solenoid Stop & check

Liquid PWM

13 Liquid injection & liquid feed PWM Shut-oﬀ Strainer El. Exp. Stop & check

Return line (ICF 50 and ICF 65 only)

41 ON/OFF 2-step solenoid Shut-oﬀ Strainer option* Solenoid Shut-oﬀ 42 Pressure (temperature) Mechanical control Shut-oﬀ Strainer option* ICS options** Shut-oﬀ 43 Pressure (temperature) Electronic control Shut-oﬀ Strainer option* Motor Shut-oﬀ 44 ON/OFF 2-step solenoid + Manuel Regulating Shut-oﬀ Strainer option* Solenoid Regul. 45 Pressure (temperature) Mechanical control + Manuel Regulating Shut-oﬀ Strainer option* ICS options** Regul. 46 Pressure (temperature) Electronic control + Manuel Regulating Shut-oﬀ Strainer option* Motor Regul.

* ICF 50 only ** ICS typical options: On/Oﬀ solenoid, Pressure or Temperature control (see ICS data sheet)

Miscellaneous

90 Multipurpose conﬁgurations

Defrost drain line

101D1P1 Liquid drain M2, loaded check valve without solenoid - 1 shut-oﬀ Shut-oﬀ Liquid drain (ammonia) Loaded check 102D1 Liquid drain M2 with solenoid - 2 shut- oﬀ Shut-oﬀ Liquid drain (ammonia) Solenoid Shut-oﬀ 102D2 Liquid drain M2 with solenoid - 2 shut- oﬀ Shut-oﬀ Liquid drain (CO) Solenoid Shut-oﬀ 103D1 Liquid drain M4 with solenoid - 1 shut- oﬀ Shut-oﬀ Solenoid Liquid drain (ammonia) 104D1 Liquid drain M4 with strainer and solenoid - 1 shut-oﬀ Shut-oﬀ Strainer Solenoid Liquid drain (ammonia) 104D2 Liquid drain M4 with strainer and solenoid - 1 shut-oﬀ Shut-oﬀ Strainer Solenoid Liquid drain (CO) 105D1 Liquid drain M2 with solenoid - 1 shut- oﬀ Shut-oﬀ Liquid drain (ammonia) Solenoid 105D2 Liquid drain M2 with solenoid - 1 shut- oﬀ Shut-oﬀ Liquid drain (CO) Solenoid 106D1 Liquid drain M2 with solenoid and manual opener - 1 shut oﬀ Shut-oﬀ Liquid drain (ammonia) Solenoid Man Open 107D1 Liquid drain M2 with solenoid and manual opener - 2 shut oﬀ Shut-oﬀ Liquid drain (ammonia) Solenoid Man Open 108D1 Liquid drain M2 without solenoid - 2 shut oﬀ Shut-oﬀ Liquid drain (ammonia) Shut-oﬀ 109D2 Liquid drain M2 Shut-oﬀ Liquid drain (CO) Solenoid Stop & check 110D1P1 Liquid drain M2, loaded check valve without solenoid - 2 shut-oﬀ Shut-oﬀ Liquid drain (ammonia) Loaded check Shut-oﬀ

24 | AI251686497769en-US1201

Page 25

Data sheet | Valve station, ICF 15, ICF 20, ICF 25, ICF 50 and 65

Liquid feed

Application 1: Liquid feed (no hot gas defrost)

Type # of

ICF 20 6 1RA ¾ 20 Butt-weld ANSI (B 36.10) ICFS 20 ICFF 20 ICFE 20 ICFO 20 ICFR 20A ICFS 20 9.5 20.9 027L3004

ICF 20 6 1RA 1 25 Butt-weld ANSI (B 36.10) ICFS 20 ICFF 20 ICFE 20 ICFO 20 ICFR 20A ICFS 20 10.1 22.2 027L3373

ICF 25 6 1RB 1¼ 32 Butt-weld ANSI (B 36.10) ICFS 25 ICFF 25 ICFE 25 ICFB 25 ICFR 25B ICFS 25 23.8 52.4 027 L4012

ICF 20 6 1RA ¾ 20 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFO 20 ICFR 20A ICFS 20 9. 5 20.9 027L3000

ICF 20 6 1RA 1 25 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFO 20 ICFR 20A ICFS 20 9. 7 21. 3 027L3002

ICF 20 6 1HRB 1 25 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20H ICFB 20 ICFR 20B ICFS 20 10.3 22.7 027L3406

ICF 25 6 1RA 1 25 Butt-weld DIN-EN 10220 ICFS 2 5 ICFF 25 ICFE 25 ICFB 25 ICFR 25A ICFS 25 23.6 51.9 027L4002

ICF 20 6 1RA 1¼ 32 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFO 20 ICFR 20A ICFS 20 9.7 21.3 027L 3003

ICF 20 6 1H RB 1¼ 32 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20H ICFB 20 ICFR 20B ICFS 20 10. 3 22.7 027L3407

ICF 25 6 1RA 1¼ 32 Butt-weld DIN-EN 10220 I CFS 25 ICFF 25 ICFE 25 ICFB 25 ICFR 25A ICFS 25 23.6 51.9 027L4006

ICF 25 6 1RB 1¼ 32 Butt-weld DIN-EN 10220 ICFS 25 ICFF 25 ICFE 25 ICFB 25 I CFR 25B ICFS 25 23.6 51.9 02 7L4011

ICF 25 6 1RB 1½ 40 Butt-weld DIN-EN 10220 ICFS 25 ICFF 25 ICFE 25 ICFB 25 ICFR 25B ICFS 25 22.7 49.9 027 L4016

ICF 20 6 1RA ¾ 20 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20 ICFE 20 ICFO 20 ICFR 20A ICFS 20 10. 4 22.9 027L3005

ICF 20 6 1RA 1 25 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICFE 20 ICFO 20 ICFR 20A ICFS 20 9.9 21.8 027L3 007

ICF 20 6 1HRB 1 25 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICFE 20H ICFB 20 ICFR 20B ICFS 20 10.9 24.0 027L3408

ICF 25 6 1RA 1 25 Socket weld, ANSI (B 16.11) ICFS 25 ICFF 25E ICFE 25 ICFB 25 ICFR 25A I CFS 25 24.1 53.0 027L40 03

ICF 20 6 1RA 1¼ 32 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICFE 20 ICFO 20 ICFR 20A ICFS 20 10.1 22.2 027L30 08

ICF 20 6 1H RB 1¼ 32 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICFE 20H ICFB 20 ICFR 20B ICFS 20 10.9 24. 0 027L3409

ICF 25 6 1RA 1¼ 32 Socket weld, ANSI (B 16.11) ICFS 25 ICFF 2 5E ICFE 25 ICFB 25 ICFR 25A I CFS 25 23.8 52.4 027L4 008

ICF 25 6 1RB 1¼ 32 Socket weld, ANSI (B 16.11) ICFS 25 ICFF 25E ICFE 25 ICFB 25 ICFR 25B ICFS 25 24 .2 53. 2 0 27L4 013

ICF 25 6 1RB 1½ 40 Sock et weld, ANSI (B 16.11) ICFS 25 ICFF 25E ICFE 25 ICFB 25 ICFR 25B ICFS 25 23.8 52.4 027L4 017

modules

Appl.#Connection size Connection type Module location Weight Code

[in.] [mm] M1 M2 M3 M4 M5 M6 kg lbs

number

Application 2: Liquid feed

Type # of

ICF 20 6 2RA ¾ 20 Butt-weld ANSI (B 36.10) ICFS 20 ICFF 20 ICFE 20 ICFO 20 ICFR 20A ICFN 20 9.8

ICF 20 6 2RA ¾ 20 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFO 20 ICFR 20A ICFN 20 9.7

ICF 20 6 2RB ¾ 20 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFO 20 ICFR 20B ICFN 20 10.2

ICF 20 6 2RB 1 25 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFO 20 ICFR 20B ICFN 20 10.2

ICF 20 6 2RA 1 25 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFO 20 ICFR 20A ICFN 20 9.7

ICF 20 6 2HRB 1 25 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20H ICFB 20 ICFR 20B ICFN 20 9.2

ICF 20 6 2R A 1¼ 32 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFO 20 ICFR 20A ICFN 20 9.7

ICF 20 6 2HRB 1¼ 32 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20H ICFB 20 ICFR 20B ICFN 20 9.2

ICF 25 6 2RA 1¼ 32 Butt-weld DIN-EN 10220 I CFS 25 ICFF 25 ICFE 25 ICFB 25 ICFR 25A ICFN 25 23.3

ICF 20 6 2RA ¾ 20 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICFE 20 ICFO 20 ICFR 20A ICFN 20 10.1

ICF 20 6 2RA 1 25 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICFE 20 ICFO 20 ICFR 20A ICFN 20 9.9

ICF 20 6 2HRB 1 25 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICFE 20H ICFB 20 ICFR 20B ICFN 20 8.8

ICF 20 6 2RA 1¼ 32 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICFE 20 ICFO 20 ICFR 20A ICFN 20 9.9

ICF 20 6 2HRB 1¼ 32 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICFE 20H ICFB 20 ICFR 20B ICFN 20 10. 9

ICAD and coils are not included and must be ordered separately. Please Note: When used in systems with CO2, the o-rings on the ICM module can swell (grow). At service, it is therefore recommended to install new o-rings, before the ICM function module is re-installed in the ICF valve body.

Modules

Appl.#Connection size Connection type Module location Weight Code number

[in.] [mm] M1 M2 M3 M4 M5 M6 kg lbs

21.6

21.3

22.9

21.3

20.2

21.3

20.2

51.3

22.2

21.8

19.4

21.8

24.0

027 L3013

027L30 09

027L3398

027L3422

02 7L 3011

027 L3410

027 L3012

02 7L 3411

027L4135

027L 3014

027L 3016

027 L3412

027 L3017

027 L3413

AI251686497769en-US1201 | 25

Page 26

Data sheet | Valve station, ICF 15, ICF 20, ICF 25, ICF 50 and 65

Liquid feed

Application 3: Liquid feed

Type # of

ICF 20 6 3RA ¾ 20 Butt-weld ANSI (B 36.10) ICFS 20 ICFF 20 ICFE 20 ICFC 20 ICFR 20A ICFS 20 9.9 21.8 027L3022

ICF 20 6 3RA 1 25 Butt-weld ANSI (B 36.10) ICFS 20 ICFF 20 ICFE 20 ICFC 20 ICFR 20A ICFS 20 9.9 21.8 02 7L3 419

ICF 20 6 3RA ¾ 20 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFC 20 ICFR 20A ICFS 20 9. 6 21.1 027L3018

ICF 20 6 3RB ¾ 20 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFC 20 ICFR 20B ICFS 20 10 .4 22.9 027L 3433

ICF 20 6 3RA 1 25 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20E ICFE 20 ICFC 20 ICFR 20A ICFS 20 10 .0 22.0 027L 3437

ICF 20 6 3HRB 1 25 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20H ICFC 20 ICFR 20B ICFS 20 10 .6 23.3 027L3414

ICF 25 6 3R A 1 25 Butt-weld DIN-EN 10220 ICFS 25 I CFF 25 ICFE 25 ICFC 25 ICFR 25A ICFS 25 23.4 51. 5 027L4 020

ICF 20 6 3RA 1¼ 32 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFC 20 ICFR 20A ICFS 20 10 .4 22.9 027L3021

ICF 20 6 3HRB 1¼ 32 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20H ICFC 20 ICFR 20B ICFS 20 10. 6 23.3 02 7L3 415

ICF 25 6 3RA 1¼ 32 Butt-weld DIN-EN 10220 I CFS 25 ICFF 25 ICFE 25 ICFC 25 ICFR 25A ICFS 25 23.2 51.0 027L4024

ICF 20 6 3RB 1¼ 32 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFC 20 ICFR 20B ICFS 20 10.4 22.9 027L343 0

ICF 25 6 3RB 1¼ 32 Butt-weld DIN-EN 10220 ICFS 25 ICFF 25 ICFE 25 ICFC 25 ICFR 25B ICFS 25 23.8 52.4 027L4 029

ICF 25 6 3RB 1½ 40 Butt-weld DIN-EN 10220 ICFS 25 ICFF 25 ICFE 25 ICFC 25 ICFR 25B ICFS 25 24.0 52.8 027L403 4

ICF 20 6 3RA ¾ 20 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICFE 20 ICFC 20 ICFR 20A ICFS 20 10.0 22.0 027L3023

ICF 20 6 3HRB ¾ 20 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICFE 20H ICFC 20 ICFR 20B ICFS 20 10. 7 23.5 027 L3418

ICF 20 6 3RA 1 25 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICFE 20 ICFC 20 ICFR 20A ICFS 20 10.0 22.0 027L3025

ICF 20 6 3HRB 1 25 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICFE 20H ICFC 20 ICFR 20B ICFS 20 11 .2 24.6 027 L3416

ICF 25 6 3RA 1 25 Socket weld, ANSI (B 16.11) ICFS 25 ICFF 25E ICFE 25 ICFC 25 ICFR 25A ICFS 25 24.2 53. 2 027L4021

ICF 20 6 3RA 1¼ 32 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICFE 20 ICFC 20 ICFR 20A ICFS 20 10.1 22.2 027L3026

ICF 20 6 3HRB 1¼ 32 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICFE 20 H ICFC 20 ICFR 20B ICFS 20 11 .3 24.9 02 7L3 417

ICF 25 6 3RA 1¼ 32 Socket weld, ANSI (B 16.11) ICFS 25 ICFF 2 5E ICFE 25 ICFC 25 ICFR 25A ICFS 25 24.1 53.0 027L4026

ICF 25 6 3RB 1¼ 32 Socket weld, ANSI (B 16.11) ICFS 25 ICFF 25E ICFE 25 ICFC 25 ICFR 25B ICFS 25 24.1 53.0 027L4031

ICF 25 6 3RB 1½ 40 Sock et weld, ANSI (B 16.11) ICFS 25 ICFF 25E ICFE 25 ICFC 25 ICFR 25B ICFS 25 24.2 53.2 027L4035

Modules

* Fixed module ICAD and coils are not included and must be ordered separately. Please Note: When used in systems with CO2, the o-rings on the ICM module can swell (grow). At service, it is therefore recommended to install new o-rings, before the ICM function module is re-installed in the ICF valve body.

Appl.#Connection size Connection type Module location Weig ht Code number

[in.] [mm] M1 M2 M3 M4 M5 M6 kg lbs

26 | AI251686497769en-US1201

Page 27

Data sheet | Valve station, ICF 15, ICF 20, ICF 25, ICF 50 and 65

Liquid feed

Application 10: Liquid feed (no hot gas defrost)

Type # of

Modules

ICF 15 4 10HRB ¾ 20 Butt-weld ANSI (B 36.10) ICFS 15* ICFF 15* ICFE 20H ICFR 20B 7.0 15. 4 027L4585

ICF 20 4 10RA ¾ 20 Butt-weld ANSI (B 36.10) ICFS 20 ICFF 20 ICFE 20 ICFR 20A 6.6 14.5 027L3077

ICF 25 4 10RA 1¼ 32 Butt-weld ANSI (B 36.10) ICFS 25 ICFF 25 ICFE 25 ICFR 25A 16.1 35.4 027L4081

ICF 15 4 10RA ½ 15 Butt-weld DIN-EN 10220 IC FS 15* ICFF 15* ICFE 20 ICFR 20A 6.3 13.8 027L45 48

ICF 15 4 10RB ½ 15 Butt-weld DIN-EN 10220 ICF S 15* ICFF 15* ICFE 20 ICFR 20B 6.3 13.8 027L45 44

ICF 15 4 10HRA ½ 15 Butt-weld DIN-EN 10220 IC FS 15* ICF F 15* ICFE 20H ICFR 20A 7. 0 15. 4 027 L4552

ICF 15 4 10HRB ½ 15 Butt-weld DIN-EN 10220 ICF S 15* I CFF 15* ICFE 20H ICFR 20B 7. 0 15 .4 027L4549

ICF 15 4 10RA ¾ 20 Butt-weld DIN-EN 10220 ICFS 15* IC FF 15* ICFE 20 ICFR 20A 6.3 13. 8 027L4545

ICF 15 4 10RB ¾ 20 Butt-weld DIN-EN 10220 IC FS 15* IC FF 15* ICFE 20 ICFR 20B 6.3 13. 8 027L454 0

ICF 15 4 10HRB ¾ 20 Butt-weld DIN-EN 10220 IC FS 15* IC FF 15* ICFE 20 H ICFR 20B 7.0 15. 4 027L4524

ICF 20 4 10RA ¾ 20 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFR 20A 6.7 14.7 027L3073

ICF 20 4 10HRB ¾ 20 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20H ICFR 20B 7.9 17. 4 027L3383

ICF 20 4 10RA 1 25 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFR 20A 7. 2 15.8 027 L3075

ICF 20 4 10RB 1 25 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFR 20B 7.2 15. 8 027L3431

ICF 20 4 10HRB 1 25 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20H ICFR 20B 7.9 17.4 027L3400

ICF 25 4 10RA 1 25 Butt-weld DIN-EN 10220 ICFS 25 ICFF 25 ICFE 25 ICFR 25A 15.9 35. 0 027L4076

ICF 25 4 10RB 1 25 Butt-weld DIN-EN 10220 ICFS 25 ICFF 25 ICFE 25 ICFR 25B 15 .9 35.0 027L4169

ICF 25 4 10RB 1 25 Butt-weld DIN-EN 10220 ICFS 25 ICFF 25E ICFE 25 ICFR 25B 16.2 35.6 027L4187

ICF 20 4 10RA 1¼ 32 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFR 20A 6.7 14.7 027L3076

ICF 20 4 10HRB 1¼ 32 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20H ICFR 20B 7.9 17. 4 027L3401

ICF 25 4 10RA 1¼ 32 Butt-weld DIN-EN 10220 ICFS 25 ICFF 25 ICFE 25 ICFR 25A 15.8 34.8 027L4 080

ICF 25 4 10RB 1¼ 32 Butt-weld DIN-EN 10220 ICFS 25 ICFF 25 ICFE 25 ICFR 25B 15. 4 33.9 027L4085

ICF 25 4 10RB 1½ 40 Butt-weld DIN-EN 10220 I CFS 25 ICFF 25 ICFE 25 ICFR 25B 15.8 34.8 027L4 090

ICF 15 4 10RA ½ 15 Socket weld, ANSI (B 16.11) IC FS 15* ICF F 15* ICFE 20 ICFR 20A 6.3 13.8 027L4586

ICF 15 4 10HRB ½ 15 Sock et weld, ANSI (B 16.11) ICFS 15* I CFF 15* ICFE 20H ICFR 20B 7.0 15. 4 027L4530

ICF 15 4 10RA ¾ 20 Socket weld, ANSI (B 16.11) IC FS 15* ICFF 15* ICFE 20 ICFR 20A 6.3 13. 8 027L462 5

ICF 15 4 10HRB ¾ 20 Socket weld, ANSI (B 16.11) IC FS 15* ICF F 15* ICFE 20H ICFR 20B 7.0 15. 4 0 27L4 615

ICF 20 4 10RA ¾ 20 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICFE 20 ICFR 20A 7.0 15. 4 027L3078

ICF 20 4 10HRB ¾ 20 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICFE 20H ICFR 20B 8.4 18. 5 027L3404

ICF 20 4 10RA 1 25 S ocket weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICFE 20 ICFR 20A 6.9 15 .2 027L3080

ICF 20 4 10HRB 1 25 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICFE 20H ICFR 20B 7.8 17. 2 027L 3402

ICF 25 4 10 RA 1 25 Socket weld, ANSI (B 16.11) ICFS 25 ICFF 25E ICFE 25 ICFR 25A 15. 8 34.8 027L4077

ICF 20 4 10RA 1¼ 32 Sock et weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICFE 20 ICFR 20A 7. 0 15. 4 027L 3081

ICF 20 4 10HRB 1¼ 32 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICFE 20H ICFR 20B 8 .1 17. 8 027L3403

ICF 25 4 10RA 1¼ 32 Sock et weld, ANSI (B 16.11) ICFS 25 ICFF 2 5E ICFE 25 ICFR 25A 12. 7 27.9 027L40 82

ICF 25 4 10RB 1¼ 32 Socket weld, ANSI (B 16.11) ICFS 25 ICFF 25E ICFE 25 I CFR 25B 16. 2 35.6 027L4087

ICF 25 4 10RB 1½ 40 Socket weld, ANSI (B 16.11) ICFS 25 ICFF 2 5E ICFE 25 I CFR 25B 16. 2 35.6 027L4 091

Appl.#Connection size Connection type Module location Weight Code number

[in.] [mm] M1 M2 M3 M4 kg lbs

AI251686497769en-US1201 | 27

Page 28

Data sheet | Valve station, ICF 15, ICF 20, ICF 25, ICF 50 and 65

Liquid feed

Application 15: Liquid feed with external connection

Type # of

ICF 20 6 15RA 1 25 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFC 20 ICFW 20D ICFR 20A 9.1 20.0 027L3157

ICF 20 6 15RB 1 25 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFC 20 ICF W 20D ICFR 20B 9.1 20.0 027L3434

ICF 25 6 15RA 1 25 Butt-weld DIN-EN 10220 ICFS 25 ICFF 25 ICFE 25 ICFC 25 ICFW 2 5D ICFR 25A 21.8 48.0 027L4121

ICF 25 6 15RB 1¼ 32 Butt-weld DIN-EN 10220 ICFS 2 5 ICFF 25 ICFE 25 ICFC 25 I CFW 25D ICFR 25B 22.7 49.9 02 7L4126

ICF 25 6 15RB 1½ 40 Butt-weld DIN-EN 10220 I CFS 25 ICFF 25 ICFE 25 ICFC 25 ICF W 25D ICFR 2 5B 21.9 48.2 027 L4130

ICF 25 6 15RA 1 25 S ocket weld, ANSI (B 16.11) ICFS 25 ICFF 25E ICFE 25 ICFC 25 I CFW 25S ICFR 25A 23.5 51.7 0 27L412 2

ICF 25 6 15RB 1¼ 32 Socket weld, ANSI (B 16.11) ICFS 25 ICFF 25E ICFE 25 ICFC 25 IC FW 25S ICFR 25B 23.6 51.9 027L4127

ICF 25 6 15RB 1½ 40 Socket weld, ANSI (B 16.11) ICFS 25 ICFF 2 5E ICFE 25 ICFC 25 ICFW 25S ICFR 25B 23.7 52.1 0 27L4131

Modules

Appl.#Connection size Connection type Module location Weight Code number

[in.] [mm] M1 M2 M3 M4 M5 M6 kg lbs

Solenoid common

Application 4: Solenoid - Liquid & hot gas lines

Type # of

ICF 20 6 4 1 25 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFO 20 ICFB 20 ICFS 20 9.2 20.2 027L3028

ICF 20 6 4 1¼ 32 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFO 20 ICFB 20 ICFS 20 9. 2 20.2 027L3029

ICF 20 6 4 ¾ 20 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICFE 20 ICFO 20 ICFB 20 ICFS 20 9.4 20.7 027 L3124

ICF 20 6 4 1 25 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICFE 20 ICFO 20 ICFB 20 ICFS 20 9.3 20.5 027L3032

ICF 20 6 4 1¼ 32 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICFE 20 ICFO 20 ICFB 20 ICFS 20 9.5 20.9 027L3033

Modules

Appl.#Connection size Connection type Module location Weight Code number

[in.] [mm] M1 M2 M3 M4 M5 M6 kg lbs

Application 8: Solenoid - Liquid & hot gas lines

Type # of

ICF 15 4 8 ½ 15 Butt-weld ANSI (B 36.10) IC FS 15* ICF F 15* ICFE 20 ICFO 20 5.7 12. 6 027L4533

ICF 15 4 8 ¾ 20 Butt-weld ANSI (B 36.10) IC FS 15* ICFF 15* ICFE 20 ICFO 20 5.7 12. 6 027L4535

ICF 20 4 8 ¾ 20 Butt-weld ANSI (B 36.10) ICFS 20 ICFF 20 ICFE 20 ICFO 20 6.3 13.9 027L3 062

ICF 15 4 8 ½ 15 Butt-weld DIN-EN 10220 ICFS 15* I CFF 15 * ICFE 20 ICFO 20 5.7 12 .6 027 L4532

ICF 15 4 8 ½ 15 Butt-weld DIN-EN 10220 ICFS 15* I CFF 15 * ICFE 20 ICFN 20 6.8 15.0 027L4579

ICF 15 4 8 ¾ 20 Butt-weld DIN-EN 10220 IC FS 15* I CFF 15* ICFE 20 ICFO 20 5.7 12. 6 027L4520

ICF 15 4 8 ¾ 20 Butt-weld DIN-EN 10220 IC FS 15* I CFF 15* ICFE 20 ICFN 20 6.8 15. 0 027 L4574

ICF 20 4 8 1 25 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFO 20 7. 2 15 .8 027L3060

ICF 25 4 8 1 25 Butt-weld DIN-EN 10220 ICFS 25 ICFF 25 ICFE 25 ICFB 25 12 .4 27. 3 027L4054

ICF 20 4 8 1¼ 32 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFO 20 6.3 13.9 027L3 061

ICF 25 4 8 1¼ 32 Butt-weld DIN-EN 10220 ICFS 25 ICFF 25 ICFE 25 ICFB 25 14. 5 31.9 027L4133

ICF 25 4 8 1½ 40 Butt-weld DIN-EN 10220 I CFS 25 ICFF 25 ICFE 25 ICFB 25 14 .5 31.9 027L4059

ICF 15 4 8 ½ 15 Pipe thread (ANSI B 1.20.1) I CFS 15 * IC FF 15* ICFE 20 ICFO 20 5.7 12. 6 027L4534

ICF 15 4 8 ½ 15 S ocket weld, ANSI (B 16.11) ICFS 15* I CFF 15 * ICFE 20 ICFO 20 5.7 12 .6 027L4526

ICF 15 4 8 ¾ 20 Socket weld, ANSI (B 16.11) IC FS 15* ICF F 15* ICFE 20 ICFO 20 5.7 12 .6 02 7L 4611

ICF 20 4 8 ¾ 20 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICFE 20 ICFO 20 6.6 14.5 027L 3366

ICF 20 4 8 1 25 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICFE 20 ICFO 20 6.7 14.7 027L3064

ICF 20 4 8 1¼ 32 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICFE 20 ICFO 20 6.7 14. 7 027L3065

ICF 15 4 8 / 22 Solder ANSI B 16.22 IC FS 15* ICF F 15* ICFE 20 ICFO 20 5.7 12 .6 027L4536

ICF 15 4 8 / 22 Solder DIN-EN1254-1 ICFS 15* ICFF 15* ICFE 20 ICFO 20 5.7 12. 6 027L4537

Modules

Appl.#Connection size Connection type Module location Weight Code number

[in.] [mm] M1 M2 M3 M4 M5 M6 kg lbs

28 | AI251686497769en-US1201

Page 29

Data sheet | Valve station, ICF 15, ICF 20, ICF 25, ICF 50 and 65

Liquid injection

Application 5: Liquid injection (expansion)

Type # of

ICF 20 6 5MA ¾ 20 Butt-weld ANSI (B 36.10) ICFS 20 ICFF 20 ICFE 20 ICFO 20 ICM 20-A ICFS 20 9.6 21.1 027L3037

ICF 20 6 5MB ¾ 20 Butt-weld ANSI (B 36.10) ICFS 20 ICFF 20 ICFE 20 ICFO 20 ICM 20-B ICFS 20 9.9 21.8 027L3043

ICF 25 6 5MA 1¼ 32 Butt-weld ANSI (B 36.10) ICFS 25 ICFF 25 ICFE 25 ICFB 25 ICM 25-A ICFS 25 23.0 50.6 027L4 043

ICF 20 6 5M A33 ¾ 20 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFO 20 ICM 20-A33 ICFS 20 10 .1 22.2 027L3367

ICF 20 6 5MA33 ¾ 20 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20-74 ICFE 20 ICFO 20 ICM 20 -A33 ICFS 20 9. 8 21. 6 027L3151

ICF 20 6 5MA ¾ 20 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFO 20 ICM 20-A ICFS 20 9.8 21. 6 027L3034

ICF 20 6 5MA ¾ 20 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 -74 ICFE 20 ICFO 20 ICM 20-A ICFS 20 9.8 21. 6 027L 3147

ICF 20 6 5MB ¾ 20 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFO 20 ICM 20-B ICFS 20 9.8 21.6 027L3145

ICF 20 6 5MB66 ¾ 20 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFO 20 ICM 20-B66 ICFS 20 9.6 21.1 027 L3161

ICF 20 6 5MC ¾ 20 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFO 20 ICM 20- C ICFS 20 9.9 21.8 027 L3432

ICF 20 6 5M A33 1 25 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFO 20 ICM 20-A33 ICFS 20 10.1 22.2 027L3388

ICF 20 6 5MA33 1 25 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20-74 ICFE 20 ICFO 20 ICM 20-A33 ICFS 20 9.6 21.1 027 L3153

ICF 20 6 5MA 1 25 Butt-weld DIN-EN 10220 ICFS 20 I CFF 20 ICFE 20 ICFO 20 ICM 20-A ICFS 20 9.8 21. 6 027L3036

ICF 20 6 5HMA 1 25 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20H ICFB 20 ICM 20 -A ICFS 20 10.4 22.9 027L3322

ICF 20 6 5MA 1 25 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20-74 ICFE 20 ICFO 20 IC M 20-A ICFS 20 9.8 21.6 0 27L314 8

ICF 20 6 5MB 1 25 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFO 20 ICM 20-B ICFS 20 9.6 21.1 027L3042

ICF 20 6 5MB 1 25 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20-74 ICFE 20 ICFO 20 ICM 20-B ICFS 20 9.8 21.6 027 L3149

ICF 20 6 5HMB 1 25 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20H ICFB 20 ICM 20 -B ICFS 20 11.4 2 5.1 027L3325

ICF 20 6 5MB66 1 25 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFO 20 ICM 20-B 66 ICFS 20 10.5 23.1 027L 3389

ICF 20 6 5MC 1 25 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFO 20 ICM 20 -C ICFS 20 9.9 21.8 027L3047

ICF 20 6 5HMC 1 25 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20H ICFB 20 ICM 20-C ICFS 20 11.4 25.1 027L3328

ICF 25 6 5MA 1 25 Butt-weld DIN-EN 10220 ICFS 25 ICFF 25 ICFE 25 ICFB 25 ICM 25-A ICFS 25 22.8 50.2 027L4038

ICF 25 6 5MA33 1¼ 32 Butt-weld DIN-EN 10220 ICFS 25 ICFF 25 ICFE 25 ICFB 25 ICM 25-A33 ICFS 25 23.0 50.6 0 27L417 1

ICF 20 6 5MB66 1¼ 32 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFO 20 ICM 20-B66 ICFS 20 9.6 21.1 027L3374

ICF 20 6 5MC 1¼ 32 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFO 20 ICM 20 -C ICFS 20 9.8 21. 6 027L3048

ICF 20 6 5HMB 1¼ 32 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20-H ICFB 20 ICM 20 -B ICFS 20 10.3 22.7 027L3390

ICF 20 6 5HMC 1¼ 32 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20H ICFB 20 ICM 20-C ICFS 20 10 .3 22.7 027L3329

ICF 25 6 5MA 1¼ 32 Butt-weld DIN-EN 10220 ICFS 25 ICFF 25 ICFE 25 ICFB 25 ICM 25-A ICFS 25 23.0 50.6 027L4 042

ICF 25 6 5MB 1¼ 32 Butt-weld DIN-EN 10220 ICFS 25 ICFF 25 ICFE 25 ICFB 25 ICM 25-B ICFS 25 22.0 48.5 027L4047

ICF 25 6 5MA 1½ 40 Butt-weld DIN-EN 10220 ICFS 25 ICFF 25E ICFE 25 ICFB 25 ICM 25-A ICFS 25 21.9 48.2 02 7L4148

ICF 25 6 5MA 1½ 40 Butt-weld DIN-EN 10220 ICFS 25 ICFF 25 ICFE 25 ICFB 25 ICM 25-A ICFS 25 22.2 48.9 027 L4174

ICF 25 6 5MA33 1½ 40 Butt-weld DIN-EN 10220 ICFS 25 ICFF 25 ICFE 25 ICFB 25 ICM 25-A33 ICFS 25 22.2 48.9 027L4170

ICF 25 6 5MB 1½ 40 Butt-weld DIN-EN 10220 ICFS 25 ICFF 25 ICFE 25 ICFB 25 ICM 25-B ICFS 25 22.2 48 .9 027L4052

ICF 20 6 5MA33 ¾ 20 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICFE 20 ICFO 20 ICM 20-A33 ICFS 20 10.1 22.2 027L3154

ICF 20 6 5MA ¾ 20 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICFE 20 ICFO 20 ICM 20-A ICFS 20 10.0 22.0 027L3038

ICF 20 6 5MB66 ¾ 20 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICFE 20 ICFO 20 ICM 20-B66 ICFS 20 10.5 2 3.1 027L315 9

ICF 20 6 5MB ¾ 20 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICFE 20 ICFO 20 ICM 20-B ICFS 20 9.8 21.6 027L 3127

ICF 20 6 5MA33 1 25 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20-E ICFE 20 ICFO 20 ICM 20 -A33 ICFS 20 10 .1 22.2 027L3391

ICF 20 6 5MA 1 25 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICFE 20 ICFO 20 ICM 20 -A ICFS 20 10 .1 22.2 027L3040

ICF 20 6 5HMA 1 25 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICFE 20H ICFB 20 ICM 20-A ICFS 20 11. 4 25 .1 027L3323

ICF 20 6 5MB66 1 25 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICFE 20 ICFO 20 ICM 20-B66 ICFS 20 10.5 23.1 027L 3160

ICF 20 6 5MB 1 25 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICFE 20 ICFO 20 ICM 20-B ICFS 20 10.0 22.0 027L 3045

ICF 20 6 5HMB 1 25 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICFE 20H ICFB 20 ICM 20-B ICFS 20 11. 0 24.2 027L 3326

ICF 20 6 5MC 1 25 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICFE 20 ICFO 20 ICM 20- C ICFS 20 10 .0 22.0 027L3051

ICF 20 6 5HMC 1 25 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICFE 20H ICFB 20 ICM 20-C ICFS 20 10 .0 22.0 027L3330

ICF 25 6 5MA 1 25 Socket weld, ANSI (B 16.11) ICFS 25 ICFF 25E ICFE 25 ICFB 25 ICM 25-A ICFS 25 23.1 50.8 027L4039

ICF 25 6 5MA33 1¼ 32 Socket weld, ANSI (B 16.11) ICFS 25 ICFF 25-E ICFE 25 ICFB 25 ICM 25-A33 ICFS 2 5 22.0 48.5 027L417 3

ICF 25 6 5MA 1¼ 32 Socket weld, ANSI (B 16.11) ICFS 25 ICFF 25E ICFE 25 ICFB 25 ICM 25-A ICFS 25 23.2 51.0 027L4 044

ICF 20 6 5MB66 1¼ 32 Sock et weld, ANSI (B 16.11) ICFS 20 ICFF 20-E ICFE 20 ICFO 20 ICM 20 -B66 ICFS 20 10.5 23.1 027L 3392

ICF 25 6 5MB 1¼ 32 Sock et weld, ANSI (B 16.11) ICFS 25 ICFF 25-E ICFE 25 ICFB 25 ICM 25-B ICFS 25 23. 2 51.1 027L4049

ICF 20 6 5MC 1¼ 32 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICFE 20 ICFO 20 ICM 20- C ICFS 20 10.1 22.2 027L3052

ICF 20 6 5HMB 1¼ 32 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20- E ICFE 20 -H ICFB 20 ICM 20-B ICFS 20 11. 0 24.2 027L3393

ICF 25 6 5MA 1½ 40 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICFE 20H ICFB 20 ICM 20- C ICFS 20 11. 0 24.2 027L3331

ICF 25 6 5MA33 1½ 40 Socket weld, ANSI (B 16.11) ICFS 25 ICFF 25-E ICFE 25 ICFB 25 ICM 25-A33 ICFS 25 22.0 48.5 02 7L4172

ICF 25 6 5MA 1½ 40 Socket weld, ANSI (B 16.11) ICFS 25 ICFF 25-E ICFE 25 ICFB 25 ICM 25-A33 ICFS 25 23.1 50.8 0 27L4132

ICF 25 6 5MB 1½ 40 S ocket weld, ANSI (B 16.11) I CFS 25 ICFF 25-E ICFE 25 ICFB 25 ICM 25-B ICFS 25 23. 2 51.1 027L4053

modules

Appl.#Connection size Connection type Module location Wei ght Co de

[in.] [mm] M1 M2 M3 M4 M5 M6 kg lbs

number

AI251686497769en-US1201 | 29

Page 30

Data sheet | Valve station, ICF 15, ICF 20, ICF 25, ICF 50 and 65

Liquid injection

Application 12: Liquid injection (expansion) PWM

Type # of

ICF 15 4 12 ¾ 20 Butt-weld ANSI (B 36.10) IC FS 15* ICF F 15* ICFA 20 ICFS 20 6.2 13. 7 027L4556

ICF 15 4 12 ½ 15 Butt-weld DIN-EN 10220 I CFS 15 * IC FF 15* ICFA 20 ICFS 20 6.2 13.7 027L4573

ICF 15 4 12 ¾ 20 Butt-weld DIN-EN 10220 ICF S 15* I CFF 15* ICFA 20 ICFS 20 6.2 13.7 027L452 2

ICF 20 4 12 ¾ 20 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFA 20 ICFS 20 6.8 15. 0 027L308 9

ICF 15 4 12 ½ 15 Socket weld, ANSI (B 16.11) I CFS 15* ICFF 15* ICFA 20 ICFS 20 6.2 13.7 027L4528

ICF 15 4 12 ¾ 20 Socket weld, ANSI (B 16.11) I CFS 15 * IC FF 15* ICFA 20 ICFS 20 6.2 13.7 0 27L4 613

ICF 20 4 12 ¾ 20 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICFA 20 ICFS 20 6.8 15. 0 027L3 091

modules

Application 14: Liquid injection (expansion)

Type # of

ICF 15 4 14MA ½ 15 Butt-weld DIN-EN 10220 IC FS 15* ICF F 15* ICM 20-A ICFS 20 6.8 15.0 02 7L4551

ICF 15 4 14MB ½ 15 Butt-weld DIN-EN 10220 ICF S 15* I CFF 15* ICM 20-B ICFS 20 6.8 15.0 027L4559

ICF 20 4 14MA33 ¾ 20 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 IC M 20-A33 ICFS 20 7. 3 16 .1 027L3394

ICF 15 4 14MA ¾ 20 Butt-weld DIN-EN 10220 IC FS 15* ICFF 15* ICM 20-A ICFS 20 6.8 15. 0 027L4525

ICF 20 4 14MA ¾ 20 Butt-weld DIN-EN 10220 ICFS 20 I CFF 20 ICM 20-A ICFS 20 7. 3 16.1 027L3 095

ICF 15 4 14MB66 ¾ 20 Butt-weld DIN-EN 10220 I CFS 15* IC FF 15* ICM 20 -B66 ICFS 20 6.8 15.0 027L4553

ICF 20 4 14MB66 ¾ 20 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICM 20 -B66 ICFS 20 7. 2 15. 8 02 7L4155

ICF 15 4 14MB ¾ 20 Butt-weld DIN-EN 10220 IC FS 15* ICFF 15* ICM 20-B ICFS 20 6.8 15.0 027L4560

ICF 20 4 14 MA33 1 25 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 I CM 20-A33 ICFS 20 6.6 14.5 027L3365

ICF 20 4 14MA 1 25 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICM 20-A ICFS 20 7.3 16.1 027L3097

ICF 20 4 14MB66 1 25 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 IC M 20-B66 ICFS 20 7. 2 15. 8 027L3356

ICF 20 4 14MB 1 25 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICM 20-B ICFS 20 7. 2 15. 8 027L3103

ICF 20 4 14MC 1 25 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICM 20 -C ICFS 20 7. 2 15. 8 027L 3108

ICF 25 4 14MA 1 25 Butt-weld DIN-EN 10220 ICFS 25 ICFF 25 ICM 25-A ICFS 25 15.5 3 4.1 027L4103

ICF 20 4 14MC 1¼ 32 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICM 20 -C ICFS 20 7.3 16.1 027L3109

ICF 25 4 14MB 1¼ 32 Butt-weld DIN-EN 10220 ICFS 25 ICFF 25 ICM 25-B ICFS 25 14.4 31.7 02 7L4112

ICF 25 4 14MA 1¼ 32 Butt-weld DIN-EN 10220 ICFS 25 ICFF 25 ICM 25-A ICFS 25 15 .4 33.9 0 27L4107

ICF 25 4 14MA

ICF 25 4 14MB

ICF 15 4 14MA ½ 15 Socket weld, ANSI (B 16.11) ICFS 15* ICF F 15* ICM 20 -A ICFS 20 6.8 15 .0 027L4531

ICF 15 4 14MB ½ 15 Socket weld, ANSI (B 16.11) I CFS 15 * IC FF 15* ICM 20-B ICFS 20 6.8 15.0 027L4583

ICF 15 4 14MB ¾ 20 Socket weld, ANSI (B 16.11) IC FS 15* ICF F 15* ICM 20-B ICFS 20 6.8 15.0 027L4 623

ICF 15 4 14MA ¾ 20 Socket weld, ANSI (B 16.11) IC FS 15* ICF F 15* ICM 20-A ICFS 20 6.8 15.0 027L4616

ICF 20 4 14MA ¾ 20 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICM 20 -A ICFS 20 7.5 16.5 027L30 99

ICF 20 4 14MA 1 25 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICM 20-A ICFS 20 6.7 14.7 027 L3101

ICF 20 4 14MB 1 25 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICM 20-B ICFS 20 6.7 14. 7 027L 3106

ICF 25 4 14MB 1 25 Socket weld, ANSI (B 16.11) ICFS 25 ICFF 25 ICM 25-B ICFS 25 14 .4 31.7 027L4188

ICF 25 4 14MB 1¼ 32 Socket weld, ANSI (B 16.11) ICFS 25 ICFF 25E ICM 25-B ICFS 25 17.3 38.1 02 7L 4114

ICF 25 4 14MB

ICF 20 4 14MC 1 25 S ocket weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICM 20-C ICFS 20 6.7 14.7 0 27L3112

ICF 25 4 14MA 1 25 Socket weld, ANSI (B 16.11) I CFS 25 ICFF 25E ICM 25-A I CFS 25 15.8 34.8 027L410 4

ICF 20 4 14MC 1¼ 32 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICM 20-C ICFS 20 7. 4 16. 3 0 27L 3113

ICF 25 4 14MA 1¼ 32 Socket weld, ANSI (B 16.11) ICFS 2 5 ICFF 25E ICM 25-A ICFS 25 15.6 34.3 0 27L4109

ICF 25 4 14MA 1½ 40 Socket weld, ANSI (B 16.11) I CFS 25 ICFF 25E ICM 25-A I CFS 25 15.8 34.8 0 27L4140

modules

Appl.#Connection size Connection type Module location Weight Code

[in.] [mm] M1 M2 M3 M4 M5 M6 kg lbs

Appl.#Connection size Connection type Module location Weight Code

[in.] [mm] M1 M2 M3 M4 M5 M6 kg lbs

1½ 40

Butt-weld DIN-EN 10220 ICFS 25 ICFF 25 ICM 25-A ICFS 25 15 .3 33.7 0 27L4182

Butt-weld DIN-EN 10220 ICFS 25 ICFF 25 ICM 25-B ICFS 25 15 .3 33.7 02 7L4117

Socket weld, ANSI (B 16.11) ICFS 25 ICFF 25E ICM 25-B ICFS 25 16.6 36.6 0 27 L4118

number

30 | AI251686497769en-US1201

Page 31

Data sheet | Valve station, ICF 15, ICF 20, ICF 25, ICF 50 and 65

Hot gas defrost

Application 9: Hot gas defrost

Type # of

ICF 20 4 9 ¾ 20 Butt-weld ANSI (B 36.10) ICFS 20 ICFF 20 ICFE 20 ICFS 20 7.2 15. 8 027L3069

ICF 15 4 9H ¾ 20 Butt-weld ANSI (B 36.10) ICFS 15* ICFF 15* ICFE 20H ICFS 20 7. 2 15. 4 027L4554

ICF 15 4 9 ½ 15 Butt-weld DIN-EN 10220 I CFS 15 * ICFF 15* ICFE 20 ICFS 20 6.3 13.9 027 L4543

ICF 15 4 9H ½ 15 Butt-weld DIN-EN 10220 IC FS 15* ICF F 15* ICFE 20H ICFS 20 7. 2 15.4 0 27L45 41

ICF 15 4 9 ¾ 20 Butt-weld DIN-EN 10220 I CFS 15* IC FF 15* ICFE 20 ICFS 20 6.3 13.9 027L4571

ICF 20 4 9 ¾ 20 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFS 20 6.7 14.7 0 27L3120

ICF 15 4 9H ¾ 20 Butt-weld DIN-EN 10220 IC FS 15* IC FF 15* ICFE 20 H ICFS 20 7. 2 15. 4 027L4521

ICF 20 4 9 1 25 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFS 20 7.2 15. 8 027L3 067

ICF 20 4 9H 1 25 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20H ICFS 20 8.2 18.0 027L3333

ICF 25 4 9 1 25 Butt-weld DIN-EN 10220 ICFS 25 ICFF 25 ICFE 25 ICFS 2 5 15.8 34.8 027L4063

ICF 20 4 9 1¼ 32 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFS 20 6.8 15.0 027L 3068

ICF 20 4 9H 1¼ 32 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20H ICFS 20 7. 6 16.7 027L3334

ICF 25 4 9 1¼ 32 Butt-weld DIN-EN 10220 ICFS 25 ICFF 25 ICFE 25 ICFS 25 15 .7 34.5 027L4067

ICF 25 4 9 1½ 40 Butt-weld DIN-EN 10220 ICFS 25 ICFF 25 ICFE 25 ICFS 25 15 .7 34.5 027L407 2

ICF 15 4 9 ½ 15 Socket weld, ANSI (B 16.11) ICFS 15* ICFF 15* ICFE 20 ICFS 20 6.3 13.9 027L4538

ICF 15 4 9H ½ 15 Socket weld, ANSI (B 16.11) ICFS 15* ICF F 15* ICFE 20H ICFS 20 7.2 15. 4 027L4527

ICF 15 4 9 ¾ 20 Socket weld, ANSI (B 16.11) I CFS 15* IC FF 15* ICFE 20 ICFS 20 6.3 13.9 027 L4618

ICF 15 4 9H ¾ 20 Socket weld, ANSI (B 16.11) IC FS 15* ICF F 15* ICFE 20H ICFS 20 7. 2 15. 4 027 L4612

ICF 20 4 9H ¾ 20 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICFE 20H ICFS 20 8.0 17.6 027L 3351

ICF 20 4 9 1 25 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICFE 20 ICFS 20 7.0 15. 4 027 L3071

ICF 20 4 9H 1 25 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICFE 20H ICFS 20 8 .1 17. 8 027L3336

ICF 25 4 9 1 25 Socket weld, ANSI (B 16.11) ICFS 25 ICFF 25E ICFE 25 ICFS 25 16.0 35.2 027L4064

ICF 20 4 9 1¼ 32 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICFE 20 ICFS 20 7. 4 16. 3 027L3072

ICF 20 4 9H 1¼ 32 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICFE 20H ICFS 20 7. 9 17. 4 027L3337

ICF 25 4 9 1¼ 32 Socket weld, ANSI (B 16.11) ICFS 25 ICFF 25E ICFE 25 ICFS 25 16.0 35.2 027L4069

ICF 25 4 9 1½ 40 Socket weld, ANSI (B 16.11) ICFS 2 5 ICFF 25E ICFE 25 ICFS 25 16.1 35.4 027L4073

Modules

Appl.#Connection size Connection type Module location Weight Code number

[in.] [mm] M1 M2 M3 M4 kg lbs

Hot gas defrost (ICF 50 only)

Application 47: Hot gas defrost - On/Oﬀ 2-step solenoid (ICF 50 only)

Type # of

ICF 50 4 47 1½ 40 Socket weld, ANSI (B 16.11) S SVA-S 50* FIA 50 ICSH 50-32 SVA- S 50 25.8 56.8 027L5070

ICF 50 4 47 1½ 40 Socket weld, ANSI (B 16.11) S SVA-S 50* FIA 50 ICSH 50-4 0 S VA-S 50 25. 8 56.8 027L5 071

ICF 50 4 47 2 50 Socket weld, ANSI (B 16.11) S S VA-S 50* FIA 50 ICSH 50 -40 SVA -S 50 25.8 56.8 027L 5072

ICF 50 4 47 2 50 Socket weld, ANSI (B 16.11) S S VA-S 50* FIA 50 ICSH 50 S VA-S 50 25.8 56.8 027L5073

Modules

Application 48: Hot gas defrost - On/Oﬀ 2-step solenoid + manual Regulating (ICF 50 only)

Type # of

ICF 50 4 48 1½ 40 Socket weld, ANSI (B 16.11) S SVA-S 50* FIA 50 ICSH 50-32 REG-SB 50 25.8 56.8 027L50 74

Modules

Appl.#Connection size Connection type Module location Wei ght Code number

[in.] [mm] M1 M2 M3 M4 kg lbs

Appl.#Connection size Connection type Module location Wei ght Code number

[in.] [mm] M1 M2 M3 M4 kg lbs

AI251686497769en-US1201 | 31

Page 32

Data sheet | Valve station, ICF 15, ICF 20, ICF 25, ICF 50 and 65

Solenoid multiple evaporators

Application 11: Solenoid - Multiple evaporators

Type # of

Modules

ICF 20 4 11 ¾ 20 Butt-weld ANSI (B 36.10) IC FS 20 ICFF 20 ICFE 20 ICFC 20 6.5 14 .3 027L30 85

ICF 15 4 11 ½ 15 Butt-weld DIN-EN 10220 I CFS 15* I CFF 15* ICFE 20 ICFC 20 6.5 14 .3 027L4539

ICF 15 4 11 ¾ 20 Butt-weld DIN-EN 10220 ICF S 15* ICF F 15* IC FE 20 ICFC 20 6.5 14. 3 027L45 47

ICF 15 4 11H ¾ 20 Butt-weld DIN-EN 10220 ICF S 15* ICF F 15* ICFE 20-H ICFC 20 7. 2 15.8 027L454 6

ICF 20 4 11 ¾ 20 Butt-weld DIN-EN 10220 I CFS 20 ICFF 20 ICFE 20 ICFC 20 6.4 14.1 027L4580

ICF 20 4 11 1 25 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 IC FE 20 ICFC 20 6.4 1 4.1 027L30 83

ICF 20 4 11H 1 25 Butt-weld DIN-EN 10220 ICFS 20 I CFF 20 ICFE 20H ICFC 20 8.0 17.6 027L 3345

ICF 20 4 11 1¼ 32 Butt-weld DIN-EN 10220 I CFS 20 ICFF 20 ICFE 20 ICFC 20 6.5 14.3 027L 3084

ICF 20 4 11H 1¼ 32 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20H ICFC 20 7.4 16 .3 027L33 46

ICF 25 4 11 1¼ 32 Butt-weld DIN-EN 10220 I CFS 25 ICFF 25 ICFE 25 ICFC 25 14. 9 32.8 027L4 094

ICF 25 4 11 1½ 40 Butt-weld DIN-EN 10220 ICFS 25 ICFF 25 I CFE 25 ICFC 25 13 .7 30.1 027L4 099

ICF 20 4 11 1 25 Socket weld, ANSI (B 16.11) IC FS 20 ICFF 2 0E ICFE 20 ICFC 20 6.9 15.2 027L3 087

ICF 20 4 11H 1 25 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICFE 20H ICFC 20 8.0 17.6 027L3348

ICF 20 4 11 1¼ 32 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20 E ICFE 20 ICFC 20 6.7 14 .7 027L30 88

ICF 20 4 11H 1¼ 32 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20 E ICFE 20 H ICFC 20 7. 4 16 .3 027L33 49

ICF 25 4 11 1¼ 32 Socket weld, ANSI (B 16.11) ICFS 25 IC FF 25E ICFE 25 IC FC 25 13 .0 28. 6 027L409 6

ICF 25 4 11 1½ 40 Socket weld, ANSI (B 16.11) I CFS 25 ICFF 25E ICFE 25 ICFC 25 14.3 31.5 02 7L410 0

Appl.#Connection size Connection type Module location Weight Code number

[in.] [mm] M1 M2 M3 M4 kg lbs

Application 18: Solenoid - Multiple evaporators

Type # of

Modules

ICF 15 4 18H ¾ 20 Butt-weld ANSI (B 36.10) ICF S 15* ICF F 15* ICFE 20-H IC FN 20 7.2 15. 8 027L4572

ICF 15 4 18H ½ 15 Butt-weld DIN-EN 10220 I CFS 15 * I CFF 15 * ICFE 20 -H ICFN 20 7. 2 15 .8 027L4542

ICF 15 4 18H ¾ 20 Butt-weld DIN-EN 10220 ICF S 15* ICF F 15* ICFE 20-H I CFN 20 7.2 15. 8 027L4 550

ICF 20 4 18 1 25 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20E ICFE 20 ICFN 20 7. 3 16.0 027 L3438

ICF 25 4 18 1 25 Butt-weld DIN-EN 10220 ICFS 25 ICFF 25 ICFE 2 5 ICFN 25 15. 8 34.8 0 27L417 5

ICF 25 4 18 1¼ 32 Butt-weld DIN-EN 10220 I CFS 25 ICFF 25 ICFE 25 ICFN 25 16.6 36.5 027 L4164

ICF 25 4 18 1¼ 32 Butt-weld DIN-EN 10220 I CFS 25 ICFF 25E ICFE 25 ICFN 25 16.6 36.5 027L4575

ICF 25 4 18 1½ 40 Butt-weld DIN-EN 10220 ICFS 25 ICFF 25 I CFE 25 ICFN 25 16.6 36.5 027 L4165

ICF 25 4 18 1½ 40 Butt-weld DIN-EN 10220 ICFS 25 ICFF 25E ICFE 2 5 ICFN 25 16.6 36.6 02 7L4177

ICF 15 4 18 ½ 15 Socket weld, ANSI (B 16.11) IC FS 15* IC FF 15* ICFE 20 I CFN 20 6.5 14.3 027L4558

ICF 15 4 18H ½ 15 Socket weld, ANSI (B 16.11) IC FS 15* IC FF 15* ICFE 20- H ICFN 20 7. 2 15 .8 027L4557

ICF 15 4 18 ¾ 20 Socket weld, ANSI (B 16.11) IC FS 15* IC FF 15* ICFE 20 ICFN 20 6.5 14. 3 02 7L4621

ICF 15 4 18H ¾ 20 Socket weld, ANSI (B 16.11) IC FS 15* IC FF 15* ICFE 20 -H I CFN 20 7.2 15. 8 027L462 0

ICF 15 4 18 ¾ 20 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20 E ICFE 20 H ICFN 20 8.0 1 7.6 027L 3353

ICF 25 4 18 1 25 Socket weld, ANSI (B 16.11) ICFS 25 I CFF 25E ICFE 25 ICFN 2 5 16. 9 37. 2 02 7L4136

ICF 20 4 18H 1 25 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICFE 20H ICFN 20 8.0 17.6 027 L3354

ICF 20 4 18H 1¼ 32 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20 E ICFE 20 H ICFN 20 8.0 17.6 027L3355

ICF 25 4 18 1¼ 32 Socket weld, ANSI (B 16.11) ICFS 25 IC FF 25E ICFE 25 ICFN 25 16 .0 35.2 02 7L4137

ICF 25 4 18 1½ 40 Socket weld, ANSI (B 16.11) I CFS 25 ICFF 25E ICFE 25 ICFN 25 16 .2 35.6 02 7L4138

Appl.#Connection size Connection type Module location Weight Code number

[in.] [mm] M1 M2 M3 M4 kg lbs

Liquid PWM

Application 13: Liquid injection & liquid feed PWM

Type # of

Modules

ICF 15 4 13 ¾ 20 Butt-weld ANSI (B 36.10) IC FS 15* ICF F 15* ICFA 20 ICFN 20 6.2 13. 7 027L4555

ICF 15 4 13 ¾ 20 Butt-weld DIN-EN 10220 ICF S 15* I CFF 15* ICFA 20 ICFN 20 6.2 13.7 027L452 3

ICF 20 4 13 ¾ 20 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFA 20 ICFN 20 6.8 15. 0 027L3092

ICF 15 4 13 ½ 15 Socket weld, ANSI (B 16.11) I CFS 15* I CFF 15* ICFA 20 ICFN 20 6.2 13.7 027L4529

ICF 15 4 13 ¾ 20 Socket weld, ANSI (B 16.11) I CFS 15 * I CFF 15* ICFA 20 ICFN 20 6.2 13.7 027L4614

ICF 20 4 13 ¾ 20 Socket weld, ANSI (B 16.11) ICFS 20 ICFF 20E ICFA 20 ICFN 20 6.8 15. 0 027L3094

ICF 15 4 13 / 22 Solder DIN-EN1254-1 ICFS 15* ICFF 15* ICFA 20 ICFN20 6.2 13.7 027L4582

Appl.#Connection size Connection type Module location Weight Code number

[in.] [mm] M1 M2 M3 M4 kg lbs

32 | AI251686497769en-US1201

Page 33

Data sheet | Valve station, ICF 15, ICF 20, ICF 25, ICF 50 and 65

Return lines

Application 41: Return lines - ON/OFF

Type # of

ICF 50 4 41 1½ 40 Butt-weld DIN-EN 10220 SVA-S 50* ICFB 50 ICLX 50 SVA-S 50 25.5 5 6.1 027L5021

ICF 50 4 41 2 50 Butt-weld DIN-EN 10220 SVA -S 50* ICFB 50 ICLX 50 SVA-S 50 25.5 56.1 027L5023

ICF 50 4 41 1½ 40 Socket weld, ANSI (B 16.11) SVA-S 50* ICFB 50 ICLX 50 SVA-S 50 25.5 5 6.1 027L502 2

ICF 50 4 41 2 50 Socket weld, ANSI (B 16.11) SVA -S 50* ICFB 50 ICLX 50 SVA- S 50 25.5 56.1 027L5024

ICF 65 3 41 2½ 65 Butt-weld ANSI (B 36.19) SVA-S 65* I CLX 65 SVA-S 65 32.7 71.9 027L6522

ICF 65 3 41 3 80 Butt-weld ANSI (B 36.19) SVA -S 65* ICLX 65 S VA-S 65 32.7 71.9 027L6 524

ICF 65 3 41 2½ 65 Butt-weld DIN-EN 10220 SVA-S 65* ICLX 65 SVA-S 65 32.7 71.9 02 7L6521

ICF 65 3 41 3 80 Butt-weld DIN-EN 10220 SVA-S 65* ICLX 65 SVA-S 65 32.7 71.9 027L6523

Modules

Application 42: Return lines - Pressure (temperature) - Mechanical control

Type # of

ICF 50 4 42S50 1½ 40 Butt-weld DIN-EN 10220 SVA-S 5 0* ICFB 50 IC S 50 SVA-S 50 25.8 56. 8 027L5001

ICF 50 4 42S32 1½ 40 Butt-weld DIN-EN 10220 SVA-S 5 0* ICFB 50 ICS 50-32 SVA -S 50 25.8 56.8 027L5005

ICF 50 4 42S40 1½ 40 Butt-weld DIN-EN 10220 SVA-S 5 0* ICFB 50 ICS 50 -40 S VA-S 50 25. 8 56.8 027L 5009

ICF 50 4 42S50 2 50 Butt-weld DIN-EN 10220 SVA-S 50* ICFB 50 ICS 50 SVA-S 50 25.8 56.8 027L5003

ICF 50 4 42S32 2 50 Butt-weld DIN-EN 10220 SVA-S 50* ICFB 50 ICS 50-32 SVA-S 50 25.8 56.8 027L5 007

ICF 50 4 42S40 2 50 Butt-weld DIN-EN 10220 SVA-S 50* ICFB 50 ICS 50- 40 SVA -S 50 25.8 56.8 02 7L 5011

ICF 50 4 42S50 1½ 40 Socket weld. ANSI (B 16.11) S VA-S 50 * ICFB 50 ICS 50 SVA-S 50 25.8 56.8 027L5002

ICF 50 4 42S32 1½ 40 Socket weld. ANSI (B 16.11) S VA-S 50 * ICFB 50 IC S 50-32 S VA-S 50 25. 8 56.8 027L 5006

ICF 50 4 42S50 2 50 Socket weld. ANSI (B 16.11) SVA- S 50* ICFB 50 ICS 50 SVA-S 50 25.8 56.8 027L50 04

ICF 50 4 42S32 2 50 Socket weld. ANSI (B 16.11) SVA- S 50* ICFB 50 IC S 50-32 S VA-S 50 25.8 56.8 027L5008

ICF 50 4 42S40 2 50 Socket weld. ANSI (B 16.11) SVA- S 50* ICFB 50 ICS 50- 40 SVA -S 50 25.8 56.8 0 27L5012

ICF 65 3 42S65 2½ 65 Butt-weld ANSI (B 36.19) SVA-S 65* ICS 65 SVA-S 65 33 .3 73.3 027L6502

ICF 65 3 42S40 2½ 65 Butt-weld ANSI (B 36.19) SVA-S 65* ICS 65-40 SVA-S 65 33.3 73.3 027L6506

ICF 65 3 42S80 2½ 65 Butt-weld ANSI (B 36.19) SVA-S 65* ICS 80 SVA-S 65 33.3 73.3 027L6510

ICF 65 3 42S65 3 80 Butt-weld ANSI (B 36.19) SVA-S 65* ICS 65 SVA-S 65 33.3 73.3 027L65 04

ICF 65 3 42S40 3 80 Butt-weld ANSI (B 36.19) SVA-S 65* ICS 65- 40 SVA-S 65 33.3 73.3 027L 6508

ICF 65 3 42S80 3 80 Butt-weld ANSI (B 36.19) SVA-S 65* ICS 80 SVA-S 65 33.3 73.3 027L6512

ICF 65 3 42S65 2½ 65 Butt-weld DIN-EN 10220 SVA-S 65* ICS 65 SVA-S 65 33.3 73.3 027L 6501

ICF 65 3 42S40 2½ 65 Butt-weld DIN-EN 10220 SVA-S 65* ICS 65-40 SVA-S 65 33 .3 73.3 027L6505

ICF 65 3 42S80 2½ 65 Butt-weld DIN-EN 10220 SVA-S 65* ICS 80 SVA-S 65 33.3 73.3 027L6509

ICF 65 3 42S65 3 80 Butt-weld DIN-EN 10220 SVA-S 65* ICS 65 SVA-S 65 33.3 73.3 027L6503

ICF 65 3 42S40 3 80 Butt-weld DIN-EN 10220 SVA-S 65* ICS 65-40 S VA-S 65 33.3 73.3 027L6507

ICF 65 3 42S80 3 80 Butt-weld DIN-EN 10220 SVA-S 65* ICS 80 S VA-S 65 33.3 73.3 0 27L 6511

All ICS modules are 3-pilot versions. They are supplied with two blanking plugs (A) and one sealing plug (B) (see page 9).

Modules

Appl.#Connection size Connection type Module location Weight Code number

[in.] [mm] M1 M2 M3 M4 kg lbs

Appl.#Connection size Connection type Module location Weight Code number

[in.] [mm] M1 M2 M3 M4 kg lbs

AI251686497769en-US1201 | 33

Page 34

Data sheet | Valve station, ICF 15, ICF 20, ICF 25, ICF 50 and 65

Return lines

Application 43: Return lines - Pressure (temperature) - Electronic control

Type # of

ICF 50 4 43MA 1½ 40 Butt-weld DIN-EN 10220 SVA- S 50* ICFB 50 IC M 50 - A S VA-S 50 24. 8 54.6 0 27L5 013

ICF 50 4 43MB 1½ 40 Butt-weld DIN-EN 10220 S VA-S 50* ICFB 50 ICM 50 - B SVA- S 50 24.8 5 4.6 02 7L5 017

ICF 50 4 43MA 2 50 Butt-weld DIN-EN 10220 S VA-S 50* ICFB 50 ICM 50 - A SVA- S 50 24.8 5 4.6 02 7L50 15

ICF 50 4 43MB 2 50 Butt-weld DIN-EN 10220 S VA-S 50 * ICFB 50 ICM 50 - B S VA-S 50 24. 8 54.6 027 L5019

ICF 50 4 43MA 1½ 40 Sock et weld, ANSI (B 16.11) SVA-S 50* ICFB 50 ICM 50 - A SVA -S 50 24.8 54.6 02 7L5014

ICF 50 4 43MB 1½ 40 Socket weld, ANSI (B 16.11) S VA-S 50 * ICFB 50 ICM 50 - B S VA-S 50 24. 8 54.6 027L 5018

ICF 50 4 43MA 2 50 Socket weld, ANSI (B 16.11) S VA-S 50* ICFB 50 ICM 50 - A SVA -S 50 24.8 54.6 02 7L5016

ICF 50 4 43MB 2 50 Socket weld, ANSI (B 16.11) S VA-S 50 * ICFB 50 ICM 50 - B S VA-S 50 24 .8 54.6 027 L5020

ICF 65 3 43MA 2½ 65 Butt-weld ANSI (B 36.19) S VA-S 65* IC M 65 - A SVA-S 65 32.9 72.4 027L6514

ICF 65 3 43MB 2½ 65 Butt-weld ANSI (B 36.19) SVA-S 65* ICM 65 - B SVA-S 65 32.9 72.4 027L6 518

ICF 65 3 43MA 3 80 Butt-weld ANSI (B 36.19) S VA-S 65* IC M 65 - A SVA-S 65 32.9 72.4 0 27L6516

ICF 65 3 43MB 3 80 Butt-weld ANSI (B 36.19) SVA-S 65* ICM 65 - B SVA-S 65 32 .9 72.4 027 L6520

ICF 65 3 43MA 2½ 65 Butt-weld DIN-EN 10220 SVA-S 65* ICM 65 - A SVA-S 65 32. 9 72.4 027 L6513

ICF 65 3 43MB 2½ 65 Butt-weld DIN-EN 10220 SVA-S 65* ICM 65 - B SVA-S 65 32.9 72.4 0 27L6 517

ICF 65 3 43MA 3 80 Butt-weld DIN-EN 10220 SVA-S 65* ICM 65 - A SVA-S 65 32. 9 72.4 027 L6515

ICF 65 3 43MB 3 80 Butt-weld DIN-EN 10220 SVA-S 65* ICM 65 - B S VA-S 65 32 .9 72.4 027 L6519

Modules

Application 44: ON/OFF 2-step solenoid + Manuel Regulating

Type # of

ICF 50 4 44 1½ 40 Butt-weld DIN-EN 10220 S VA-S 50* ICFB 50 ICLX 50 REG-SB 5 0 25. 5 56.1 027 L5045

ICF 50 4 44 2 50 Butt-weld DIN-EN 10220 SVA -S 50* ICFB 50 ICLX 50 R EG-SB 50 25.5 5 6.1 027L5046

ICF 50 4 44 1½ 40 Socket weld, ANSI (B 16.11) S VA-S 50* ICFB 50 ICLX 50 REG-SB 50 2 5.5 56.1 0 27L5047

ICF 50 4 44 2 50 Socket weld, ANSI (B 16.11) S VA-S 50* ICFB 50 ICLX 50 REG-SB 5 0 25. 5 5 6.1 027L5 048

Modules

Application 45: Pressure (temperature) Mechanical control + Manuel Regulating

Type # of

ICF 50 4 45S50 1½ 40 Butt-weld DIN-EN 10220 SVA- S 50* ICFB 50 ICS 50 R EG-SB 50 25.8 56.8 027L 5025

ICF 50 4 45S32 1½ 40 Butt-weld DIN-EN 10220 SVA- S 50* ICFB 50 ICS 50 -32 R EG-SB 50 25.8 56.8 027L 5029

ICF 50 4 45S40 1½ 40 Butt-weld DIN-EN 10220 SVA- S 50* ICFB 50 IC S 50-40 R EG-SB 50 25.8 56.8 027L 5033

ICF 50 4 45S50 2 50 Butt-weld DIN-EN 10220 SVA -S 50* ICFB 50 IC S 50 REG-SB 50 25. 8 56. 8 027L5027

ICF 50 4 45S32 2 50 Butt-weld DIN-EN 10220 SVA -S 50* ICFB 50 ICS 50 -32 REG-S B 50 2 5.8 56. 8 027 L5031

ICF 50 4 45S40 2 50 Butt-weld DIN-EN 10220 SVA -S 50* ICFB 50 ICS 50-40 REG -SB 50 25.8 56.8 027L5035

ICF 50 4 45S50 1½ 40 Socket weld, ANSI (B 16.11) SVA -S 50* ICFB 50 ICS 50 REG-SB 50 25. 8 56.8 027L 5026

ICF 50 4 45S32 1½ 40 Socket weld, ANSI (B 16.11) SVA -S 50* ICFB 50 ICS 50 -32 R EG-SB 50 25.8 56.8 027L 5030

ICF 50 4 45S40 1½ 40 Socket weld, ANSI (B 16.11) SVA -S 50* ICFB 50 IC S 50-40 REG-SB 50 25. 8 56. 8 027 L5034

ICF 50 4 45S50 2 50 Socket weld, ANSI (B 16.11) S VA-S 50* ICFB 50 IC S 50 REG-SB 50 25. 8 56. 8 027L5028

ICF 50 4 45S32 2 50 Socket weld, ANSI (B 16.11) S VA-S 50* ICFB 50 ICS 5 0-32 REG -SB 50 25.8 56.8 0 27L5032

ICF 50 4 45S40 2 50 Socket weld, ANSI (B 16.11) S VA-S 50* ICFB 50 ICS 50-40 RE G-SB 50 25.8 56.8 027L5 036

ICF 65 3 45S65 3 65 Butt-weld DIN-EN 10220 S VA-S 65* ICS 65 R EG-SB 65 33.3 73. 3 027L6525

ICF 65 3 45S65 3 65 Butt-weld DIN-EN 10220 S VA-S 65* ICS 80 R EG-SB 65 33.3 73. 3 027L6526

Modules

Application 46: Pressure (temperature) Electronic control + Manual Regulating

Type # of

ICF 50 4 46MA 1½ 40 Butt-weld DIN-EN 10220 SVA- S 50* ICFB 50 ICM 50-A R EG-SB 50 24. 8 54.6 027 L5037

ICF 50 4 46MB 1½ 40 Butt-weld DIN-EN 10220 S VA-S 50* ICFB 50 ICM 50 -B REG -SB 50 24.8 5 4.6 027 L50 41

ICF 50 4 46MA 2 50 Butt-weld DIN-EN 10220 S VA-S 50* ICFB 50 ICM 50-A REG-SB 50 24.8 54.6 027L 5039

ICF 50 4 46MB 2 50 Butt-weld DIN-EN 10220 S VA-S 50 * ICFB 50 ICM 50 -B REG-S B 50 24.8 54.6 027L 5043

ICF 50 4 46MA 1½ 40 Sock et weld, ANSI (B 16.11) SVA-S 50* ICFB 50 ICM 50 -A REG-SB 5 0 24 .8 54.6 027L503 8

ICF 50 4 46MB 1½ 40 Socket weld, ANSI (B 16.11) S VA-S 50 * ICFB 50 ICM 50 -B REG -SB 50 24.8 54.6 027L 5042

ICF 50 4 46MA 2 50 Socket weld, ANSI (B 16.11) S VA-S 50* ICFB 50 ICM 50-A REG-SB 50 24.8 54.6 027L5 040

ICF 50 4 46MB 2 50 Socket weld, ANSI (B 16.11) S VA-S 50 * ICFB 50 ICM 50 -B REG -SB 50 24.8 54. 6 027L 5044

All ICS modules are 3-pilot versions. They are supplied with two blanking plugs (A) and one sealing plug (B) (see page 9).

Modules

Appl.#Connection size Connection type Module location Weight Code number

[in.] [mm] M1 M2 M3 M4 kg lbs

Appl.#Connection size Connection type Module location Weight Code number

[in.] [mm] M1 M2 M3 M4 kg lbs

Appl.#Connection size Connection type Module location Weight Code number

[in.] [mm] M1 M2 M3 M4 kg lbs

Appl.#Connection size Connection type Module location Weight Code number

[in.] [mm] M1 M2 M3 M4 kg lbs

34 | AI251686497769en-US1201

Page 35

Data sheet | Valve station, ICF 15, ICF 20, ICF 25, ICF 50 and 65

Miscellaneous

Application 90: Miscellaneous

Type # of

ICF 20 4 90 ¾ 20 Butt-weld ANSI (B 36.10) ICFS 20 ICFF 20E ICFE 20 ICFN 20 7. 2 15. 8 027L3371

ICF 20 6 90 1 25 Butt-weld ANSI (B 36.10) ICFS 20 ICFF 20 ICFE 20 ICFC 20 ICFB 20 ICFB 20 10. 2 22.5 027L3 420

ICF 20 6 90 1 25 Butt-weld ANSI (B 36.10) ICFS 20 ICFF 20 ICFE 20 ICFS 20 ICFB 20 ICFB 20 9.7 21. 4 027L 3421

ICF 20 4 90 ¾ 20 Butt-weld DIN-EN 10220 ICFR 20A ICFF 20 ICFA 20 ICFN 20 6.4 14 .1 027L315 6

ICF 20 4 90 ¾ 20 Butt-weld DIN-EN 10220 ICFR 20A ICFF 20 ICFE 20 ICFN 20 6.4 14 .1 02 7L3155

ICF 20 4 90 ¾ 20 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFN 20 7.2 15. 8 027L3379

ICF 20 4 90 ¾ 20 Butt-weld DIN-EN 10220 ICFS 20 ICFW 20 -D ICFE 20 ICFS 20 5.9 13.0 027L3385

ICF 20 4 90 ¾ 20 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFB 20 ICFC 20 5.9 13.0 027 L3141

ICF 20 4 99 ¾ 20 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFB 20 6.2 13.7 0 27L3122

ICF 20 4 99 ¾ 20 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFO 20 6 .1 13.4 027L 3359

ICF 20 4 99 ¾ 20 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFR 20A 6.7 14. 8 027L370 0

ICF 20 4 90 ¾ 20 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFB 20 ICFN 20 6.7 14. 8 027L3405

ICF 15 4 90 ½ 15 Butt-weld DIN-EN 10220 I CFS 15 * IC FF 15* ICFB 20 ICFN 20 6.7 14. 8 027L4581

ICF 15 4 90 ¾ 20 Butt-weld DIN-EN 10220 ICF S 15* I CFF 15* ICFR 20A ICFN 20 7.2 15. 8 027L4576

ICF 20 6 90 ¾ 20 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFO 20 ICFA 20 ICFS 20 9.4 20.7 027L3053

ICF 20 6 90 ¾ 20 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFA 20 ICFC 20 ICFB 20 ICFS 20 9.9 21. 8 027L3056

ICF 20 6 90 ¾ 20 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFO 20 ICM 20-A ICFN 20 9.7 21.3 027L3372

ICF 20 6 90 ¾ 20 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFB 20 ICFR 20-A ICFN 20 9.7 21. 3 027L3133

ICF 20 6 90 ¾ 20 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFC 20 ICFB 20 ICFR 20A 9.4 20.7 027L 3144

ICF 20 6 90 ¾ 20 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFC 20 ICM 20-C ICFS 20 9.7 21. 3 027 L3152

ICF 20 6 90 ¾ 20 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFO 20 ICFS 20 ICFC 20 9.8 21. 6 027L3360

ICF 20 6 90 ¾ 20 Butt-weld DIN-EN 10220 ICFB 20 ICFC 20 ICFE 20 ICFO 20 ICFS 20 ICFB 20 6.2 13. 6 02 7L3121

ICF 20 6 90 ¾ 20 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20H ICFC 20 ICFB 20 ICFS 20 9.6 21.1 027L3387

ICF 20 6 90 ¾ 20 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFC 20 ICFR 20A ICFW 20D 9.1 20.1 027L3368

ICF 20 6 90 ¾ 20 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20H ICFC 20 ICFR 20A ICFS 20 10.2 22.5 027L3386

ICF 20 6 90 ¾ 20 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFC 20 ICM 20B ICFS 20 9.7 21.4 027L3397

ICF 20 6 90 ¾ 20 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFC 20 ICFB 20 ICFS 20 9.4 20.7 027 L3424

ICF 20 6 90 ¾ 20 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFO 20 ICM 20 B ICFN 20 9. 6 21.1 027L 3425

ICF 20 6 99 ¾ 20 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFC 20 ICFB 20 ICFR 20A 9.4 20.7 027L 3701

ICF 20 6 90 ¾ 20 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20E ICFE 20 ICFN 20 ICFR 20B ICFW 20D 9.1 20.1 027L3439

ICF 20 6 90 ¾ 20 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFC 20 ICF W 20D ICFS 20 9.1 20 .1 0 27L3 441

ICF 20 6 90 ¾ 20 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFO 20 ICFB 20 ICFN 20 9.4 20.7 027L3446

ICF 20 6 90 ¾ 20 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFC 20 ICFR 20B ICF W 20D 9.1 2 0.1 027L3447

ICF 20 4 90 1 25 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFN 20 6.7 14.7 027 L3134

ICF 20 4 90 1 25 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFB 20 5.9 13 .0 027L33 64

ICF 20 4 90 1 25 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20H ICFN 20 7. 2 15. 8 027L3380

ICF 20 6 90 1 25 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFO 20 ICFA 20 ICFS 20 9.8 21.6 027L 3361

ICF 20 6 90 1 25 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFC 20 ICFR 20A ICFB 20 9.1 20.0 027L33 63

ICF 20 6 90 1 25 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20H ICFC 20 ICFR 20B ICFW 20D 12. 0 26.4 027L3376

ICF 20 6 90 1 25 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20E ICFE 20H ICFC 20 ICFR 20B ICFW 20D 11. 5 25.3 027L3375

modules

Appl.#Connection size Connection type Module location Weight Code

[in.] [mm] M1 M2 M3 M4 M5 M6 kg lbs

number

AI251686497769en-US1201 | 35

Page 36

Data sheet | Valve station, ICF 15, ICF 20, ICF 25, ICF 50 and 65

Miscellaneous

Application 90: Miscellaneous

Type # of

ICF 20 4 90 20 Butt-weld DIN-EN 10220 ICFB 20 ICFD 20C ICFE 20 ICFB 20 027L 3599

ICF 20 4 90 25 Butt-weld DIN-EN 10220 IC FB 20 ICFD 20C ICFE 20 ICFB 20 027L360 0

ICF 20 6 90 1 25 Butt-weld DIN-EN 10220 IC FS 20 ICFF 20 ICFE 20 ICFC 20 ICFB 20 ICFS 20 9.4 20.7 02 7L312 3

ICF 25 6 90 1 25 Butt-weld DIN-EN 10220 ICFS 25 ICFF 25 ICFE 25 ICFC 25 IC FR 25B IC FW 25D 23.6 51.9 027 L4168

ICF 25 6 90 1 25 Butt-weld DIN-EN 10220 ICFS 25 ICFF 25 ICFE 25 ICFC 25 ICFS 25 ICFB 25 22.0 48.4 0 27L4151

ICF 20 6 90 1 25 Butt-weld DIN-EN 10220 IC FS 20 ICFF 20 ICFE 20 ICFC 20 ICFR 20A I CFW 20D 9. 0 19. 8 027L33 69

ICF 20 6 90 1 25 Butt-weld DIN-EN 10220 IC FS 20 ICFF 20 ICFE 20 ICFO 20 ICFA 20 ICFC 20 9.6 21.1 027L339 6

ICF 20 6 90 1 25 Butt-weld DIN-EN 10220 IC FS 20 ICFF 20E ICFE 2 0H ICFC 20 ICFR 20A ICFB 20 9.7 21.4 027L 3423

ICF 20 6 90 1 25 Butt-weld DIN-EN 10220 IC FS 20 ICFF 20 ICFE 20 ICFO 20 ICM 20B ICFN 20 9.6 21.1 027L3426

ICF 25 6 90 1 25 Butt-weld DIN-EN 10220 ICFS 25 I CFF 25E ICFE 25 I CFC 25 ICFR 25B ICFB 25 23.6 52.0 027L 4176

ICF 25 6 90 1 25 Butt-weld DIN-EN 10220 ICFS 25 I CFF 25E ICFE 25 I CFC 25 ICFR 25B ICFF 25 23.8 52.4 027 L4577

ICF 25 6 90 1 25 Butt-weld DIN-EN 10220 ICFS 25 I CFF 25E ICFE 25 ICFN 2 5 ICFR 25B IC FW 25D 2 2.7 49.9 0 27L418 6

ICF 25 6 90 1¼ 32 Butt-weld DIN-EN 10220 ICFS 25 ICFF 25 ICFE 25 ICFC 25 ICFR 25B ICFB 25 21.7 47.7 0 27L4143

ICF 25 6 90 1¼ 32 Butt-weld DIN-EN 10220 ICFS 25 I CFF 25E ICFE 25 IC FC 25 ICFR 25B I CFW 25D 22.7 49.9 0 27L416 0

ICF 25 6 90 1¼ 32 Butt-weld DIN-EN 10220 ICFS 25 ICFF 25 ICFE 25 ICFC 25 ICFR 25B ICFW 2 5D 21.9 48.2 0 27L4161

ICF 25 6 90 1¼ 32 Butt-weld DIN-EN 10220 ICFS 25 I CFF 25E ICFE 25 ICFC 2 5 ICFB 25 ICFS 2 5 21.9 48.2 027 L4162

ICF 25 6 90 1¼ 32 Butt-weld DIN-EN 10220 ICFS 25 I CFF 25-E ICFE 25 ICFC 25 ICFR 25B ICFB 25 22.7 49.9 027 L4178

ICF 25 6 90 1½ 40 Butt-weld DIN-EN 10220 I CFS 25 ICFF 25 ICFE 25 ICFC 25 IC FR 25A ICFW 25D 23.6 51.9 027 L4157

ICF 25 6 90 1½ 40 Butt-weld DIN-EN 10220 I CFS 25 ICFF 25E ICFE 25 ICFC 25 ICFR 25B ICFW 25D 23.6 51.9 027 L4166

ICF 25 6 90 1½ 40 Butt-weld DIN-EN 10220 I CFS 25 ICFF 25 ICFE 25 ICFC 25 I CFR 25B ICFW 2 5D 21. 7 4 7.7 027L4167

ICF 25 4 90 1½ 40 Butt-weld DIN-EN 10220 I CFS 25 ICFF 25 ICM 25A ICFB 25 14.9 32.8 02 7L4185

ICF 25 4 90 1½ 40 Butt-weld DIN-EN 10220 I CFS 25 ICFF 25 ICFE 2 5 ICFR 25A 16.1 35.4 027 L4192

ICF 20 4 90 ¾ 20 Socket weld, ANSI (B 16.11) ICFS 2 0 ICFF 20 E ICM 20-A33 ICFB 20 7. 2 15 .8 027L33 62

ICF 20 4 90 1 25 Socket weld, ANSI (B 16.11) ICFR 20A ICFF 20E ICFE 20 ICFN 20 7.2 15 .8 0 27L417 9

ICF 20 4 90 1 25 Socket weld, ANSI (B 16.11) ICFR 20B I CFF 20E I CFE 20H I CFN 20 7.9 17. 4 027L4578

ICF 20 4 90 1 25 Socket weld, ANSI (B 16.11) ICFB 20 I CFF 20 ICFE 20 ICFN 2 0 7.0 15 .4 027L3357

ICF 25 4 90 1 25 Socket weld, ANSI (B 16.11) ICFB 2 5 ICFF 2 5E ICFE 25 ICFN 25 14 .1 31.0 02 7L4149

ICF 25 4 90 1 25 Socket weld, ANSI (B 16.11) I CFS 25 ICFF 25E ICFB 25 IC FR 25A 16 .1 35.5 0 27L4180

ICF 25 4 90 1½ 40 Socket weld, ANSI (B 16.11) ICFS 25 ICFF 25E ICFB 25 ICFR 25A 16.1 35.5 02 7L4181

ICF 20 4 90 ¾ Socket weld, ANSI (B 16.11) ICFB 20 ICFD 20C ICFE 20 I CFB 20 027L36 05

ICF 20 6 90 ¾ 20 Socket weld, ANSI (B 16.11) ICFS 2 0 ICFF 20 E ICFE 20 ICFO 20 I CFA 20 ICFS 2 0 9.3 20.5 027L 3055

ICF 20 6 90 ¾ 20 Socket weld, ANSI (B 16.11) ICFS 2 0 ICFF 20 E IC FA 20 ICFC 20 I CFB 20 I CFS 20 9.9 21.8 027L3 058

ICF 20 6 90 ¾ 20 Socket weld, ANSI (B 16.11) ICFS 2 0 ICFF 20 E ICFE 20 ICFO 20 I CFB 20 ICFN 20 9.4 20.7 0 27L315 0

ICF 20 6 90 ¾ 20 Socket weld, ANSI (B 16.11) ICFS 2 0 ICFF 20 E ICFE 20 H I CFC 20 ICFW 20S ICFS 20 10.4 2 2.9 027L4153

ICF 20 4 90 1 Socket weld, ANSI (B 16.11) ICFB 20 ICFD 20C ICFE 20 IC FB 20 027L360 6

ICF 20 6 90 1 25 Socket weld, ANSI (B 16.11) I CFS 20 ICFF 20E ICFE 20H ICFC 20 ICFW 20S ICFS 20 11. 5 25. 3 027L 3377

ICF 25 6 90 1 25 Socket weld, ANSI (B 16.11) I CFS 25 ICFF 25E ICFE 25 ICFC 25 ICFB 25 ICFS 25 2 3.1 50.8 02 7L4156

ICF 25 6 90 1 25 Socket weld, ANSI (B 16.11) I CFS 25 ICFF 25E ICFE 25 ICFC 25 ICFW 25S ICFS 25 25.1 55.2 02 7L4158

ICF 20 6 90 1¼ 32 Socket weld, ANSI (B 16.11) IC FS 20 ICFF 2 0E ICFE 20 H ICFC 20 IC FB 20 I CFS 20 10.5 23.1 027L 3378

ICF 20 6 90 1¼ 32 Socket weld, ANSI (B 16.11) IC FS 20 ICFF 2 0E ICFE 20 H ICFC 20 ICF W 20S IC FS 20 10.5 23.1 027L 4152

ICF 25 6 90 1¼ 32 Socket weld, ANSI (B 16.11) ICFS 25 I CFF 25E ICFE 25 I CFC 25 ICF W 25S ICFS 25 2 5.1 55.2 027L 4154

ICF 25 6 90 1½ 40 Socket weld, ANSI (B 16.11) ICFS 25 ICFF 25E ICFE 2 5 ICFC 25 ICFW 25S ICFS 25 25 .1 55.2 027L 4159

ICF 20 4 90 ¾ 20 Butt-weld DIN-EN 10220 ICFB 20 ICFD 20 ICFE 2 0 ICFB 20 12. 4 27. 3 027L3483

ICF 20 4 90 1 25 Butt-weld DIN-EN 10220 ICFB 20 ICFD 20 ICFE 20 ICFB 20 12. 4 2 7.3 027L3484

ICF 20 4 90 1¼ 32 Butt-weld DIN-EN 10220 ICFB 20 ICFD 20 I CFE 20 IC FB 20 12 .4 27.3 027L3485

ICF 20 4 90 ¾ 20 Butt-weld DIN-EN 10220 ICFS 20 ICFD 20 ICFE 20 ICFN 20 12 .1 26. 7 02 7L 3711

ICF 20 6 90 ¾ 20 Socket weld, ANSI (B 16.11) ICFS 2 0 I CFB 20 IC FE 20 ICFD 20 ICFB 20 ICFS 20 15 .0 33.1 027L34 63

ICF 20 6 90 1 25 Socket weld, ANSI (B 16.11) I CFS 20 ICFB 20 ICFE 20 ICFD 20 ICFB 20 IC FS 20 15.0 33.1 027L 3464

ICF 20 6 90 1¼ 32 Socket weld, ANSI (B 16.11) IC FS 20 I CFB 20 I CFE 20 ICFD 20 ICFB 20 ICFS 20 15 .0 33.1 027L3 465

modules

Note!

For special applications that cannot be covered by our predeﬁned ICF code numbers please consult Coolselector®2 or your local Danfoss Sales company.

http://refrigerationandairconditioning.danfoss.com/support-center/apps-and-software/coolselector/

Prior to designing „non standard“ conﬁgurations there are some basic restrictions to the location of the function modules that must be followed (see page 38)

Appl.#Connection size Connection type Module location Weight Code

[in.] [mm] M1 M2 M3 M4 M5 M6 kg lbs

number

36 | AI251686497769en-US1201

Page 37

Data sheet | Valve station, ICF 15, ICF 20, ICF 25, ICF 50 and 65

Defrost drain line

Application 101D1P1 (Ammonia): Liquid drain M2, loaded check valve without solenoid - 1 shut-oﬀ

Type

ICF 20 4 101 ¾ 20 Socket weld, ANSI (B 16.11) ICFS 20 ICFD 20 ICFB 20 ICFC 20P1 ICF 20 4 101 1 25 Socket weld, ANSI (B 16.11) ICFS 20 ICFD 20 ICFB 20 ICFC 20P1 ICF 20

# of

modules

4 101

Connection size

Appl.

[in.] [mm] M1 M2 M3 M4 M5 M6 kg lbs

1¼

Connection type

Socket weld, ANSI (B 16.11) ICFS 20 ICFD 20 ICFB 20

Application 102D1 (Ammonia): Liquid drain M2 with solenoid - 2 shut-oﬀ

Type

ICF 20 4 102 ¾ 20 Butt-weld DIN-EN 10220 ICFS 20 ICFD 20 ICFE 20 ICFS 20 12.7 28 027L3489 ICF 20 4 102 1 25 Butt-weld DIN-EN 10220 ICFS 20 ICFD 20 ICFE 20 ICFS 20 12.7 28 027L349 0 ICF 20 4 102 1¼ 32 Butt-weld DIN-EN 10220 ICFS 20 ICFD 20 ICFE 20 ICFS 20 12 .7 28 027L 3491 ICF 20 4 102 ¾ 20 Socket weld, ANSI (B 16.11) ICFS 20 ICFD 20 ICFE 20 ICFS 20 13 .2 29.1 027L3480 ICF 20 4 102 1 25 Socket weld, ANSI (B 16.11) ICFS 20 ICFD 20 ICFE 20 ICFS 20 13 .1 29.1 027L3481 ICF 20 4 102 1¼ 32 Socket weld, ANSI (B 16.11) ICFS 20 ICFD 20 ICFE 20 ICFS 20 12 .5 27. 6 027L3 482

# of

modules

Connection size

Appl.

[in.] [mm] M1 M2 M3 M4 M5 M6 kg lbs

Connection type

Application 102D2 (CO): Liquid drain M2 with solenoid - 2 shut-oﬀ

Type

ICF 20 4 102 ¾ 20 Butt-weld DIN-EN 10220 ICFS 20 ICFD 20C ICFE 20 ICFS 20 027L 3601 ICF 20 4 102 1 25 Butt-weld DIN-EN 10220 ICFS 20 ICFD 20C ICFE 20 ICFS 20 027L 3602 ICF 20 4 102 1¼ 32 Butt-weld DIN-EN 10220 ICFS 20 ICFD 20C ICFE 20 ICFS 20 02 7L3 612 ICF 20 4 102 ¾ 20 Socket weld, ANSI (B 16.11) ICFS 20 ICFD 20C ICFE 20 ICFS 20 027L36 07 ICF 20 4 102 1 25 Socket weld, ANSI (B 16.11) ICFS 20 ICFD 20C ICFE 20 ICFS 20 027L3608

# of

modules

Connection size

Appl.

[in.] [mm] M1 M2 M3 M4 M5 M6 kg lbs

Connection type

Module location Wei ght

12. 6 2 7.7 027 L3628

12. 6 2 7.7

ICFC 20P1 12 .6 27.7 027L3630

Module location Wei ght

Code

number

027L3629

Code

number

Code

number

Application 103D1 (Ammonia): Liquid drain M4 with solenoid - 1 shut-oﬀ

Type

ICF 20 4 103 ¾ 20 Socket weld, ANSI (B 16.11) ICFS 20 ICFB 20 ICFE 20 ICFD 20 12.6 27.8 027L 3460 ICF 20 4 103 1 25 Socket weld, ANSI (B 16.11) ICFS 20 ICFB 20 ICFE 20 ICFD 20 12. 5 27. 8 027 L34 61 ICF 20 4 103 1¼ 32 Socket weld, ANSI (B 16.11) ICFS 20 ICFB 20 ICFE 20 ICFD 20 11. 9 26.2 027L34 62

# of

modules

Connection size

Appl.

[in.] [mm] M1 M2 M3 M4 M5 M6 kg lbs

Connection type

Module location Wei ght

Code

number

Application 104D1 (Ammonia): Liquid drain M4 with strainer and solenoid - 1 shut-oﬀ

Type

ICF 15 4 104 ¾ 20 Butt-weld DIN-EN 10220 I CFS 15 IC FF 15 ICFE 20 ICFD 20 13 .6 30 027L458 9 ICF 20 4 104 1 25 Butt-weld DIN-EN 10220 ICFS 20 ICFF 20 ICFE 20 ICFD 20 12.1 26.7 027L3597 ICF 20 4 104

# of

modules

Connection size

Appl.

[in.] [mm] M1 M2 M3 M4 M5 M6 kg lbs

1¼ 32

Connection type

Butt-weld DIN-EN 10220 ICFS 20 ICFF 20E ICFE 20 ICFD 20

Module location Wei ght

12. 6 2 7.7 027 L3170

Code

number

Application 104D2 (CO): Liquid drain M4 with strainer and solenoid - 1 shut-oﬀ

Type

ICF 15 4 104 ¾ 20 Butt-weld DIN-EN 10220 I CFS 15 IC FF 15 ICFE 20 ICFD 20C 02 7L 3611

# of

modules

Connection size

Appl.

[in.] [mm] M1 M2 M3 M4 M5 M6 kg lbs

Connection type

Module location Wei ght

Code

number

Application 105D1 (Ammonia): Liquid drain M2 with solenoid - 1 shut-oﬀ

Type

ICF 20 4 105 ¾ 20 Butt-weld DIN-EN 10220 ICFS 20 ICFD 20 ICFE 20 ICFB 20 12.1 26.7 027L34 86 ICF 20 4 105 1 25 Butt-weld DIN-EN 10220 ICFS 20 ICFD 20 ICFE 20 ICFB 20 12.1 26.7 027L3 487 ICF 20 4 105 1¼ 32 Butt-weld DIN-EN 10220 ICFS 20 ICFD 20 ICFE 20 ICFB 20 12.1 26 .7 027L3488

# of

modules

Connection size

Appl.

[in.] [mm] M1 M2 M3 M4 M5 M6 kg lbs

Connection type

Module location Wei ght

Code

number

AI251686497769en-US1201 | 37

Page 38

Data sheet | Valve station, ICF 15, ICF 20, ICF 25, ICF 50 and 65

Application 105D2 (CO): Liquid drain M2 with solenoid - 1 shut-oﬀ

Type

ICF 20 4 105 ¾ 20 Butt-weld DIN-EN 10220 ICFS 20 ICFD 20C ICFE 20 ICFB 20 027L3603 ICF 20 4 105 1 25 Butt-weld DIN-EN 10220 ICFS 20 ICFD 20C ICFE 20 ICFB 20 027L36 04

# of

modules

Connection size

Appl.

[in.] [mm] M1 M2 M3 M4 M5 M6 kg lbs

Connection type

Module location Wei ght

Code

number

Application 106D1 (Ammonia): Liquid drain M2 with solenoid and manual opener - 1 shut oﬀ

Type

ICF 20 4 106 ¾ 20 Socket weld, ANSI (B 16.11) ICFS 20 ICFD 20 ICFE 20 ICFO 20 12.9 28.4 027L 3551 ICF 20 4 106 1 25 Socket weld, ANSI (B 16.11) ICFS 20 ICFD 20 ICFE 20 ICFO 20 12.9 28.4 027L3496 ICF 20 4 106 1¼ 32 Socket weld, ANSI (B 16.11) ICFS 20 ICFD 20 ICFE 20 ICFO 20 12. 9 28.4 027L3 497

# of

modules

Connection size

Appl.

[in.] [mm] M1 M2 M3 M4 M5 M6 kg lbs

Connection type

Module location Wei ght

Code

number

Application 107D1 (Ammonia): Liquid drain M2 with solenoid and manual opener - 2 shut oﬀ

Type

ICF 20 6 107 ¾ 20 Socket weld, ANSI (B 16.11) ICFS 20 ICFD 20 ICFE 20 ICFO 20 ICFB 20 ICFS 20 15. 7 34.5 027L3 498 ICF 20 6 107 1 25 Socket weld, ANSI (B 16.11) ICFS 20 ICFD 20 ICFE 20 ICFO 20 ICFB 20 ICFS 20 15 .7 34.5 027L349 9 ICF 20 6 107 1¼ 32 Socket weld, ANSI (B 16.11) ICFS 20 ICFD 20 ICFE 20 ICFO 20 ICFB 20 ICFS 20 15. 7 34.5 027L 3550

# of

modules

Connection size

Appl.

[in.] [mm] M1 M2 M3 M4 M5 M6 kg lbs

Connection type

Module location Wei ght

Code

number

Application 108D1 (Ammonia): Liquid drain M2 without solenoid - 2 shut oﬀ

Type

ICF 20 4 108 ¾ 20 Socket weld, ANSI (B 16.11) ICFS 20 ICFD 20 ICFB 20 ICFS 20 11 .9 26.2 027L3558 ICF 20 4 108 1 25 Socket weld, ANSI (B 16.11) ICFS 20 ICFD 20 ICFB 20 ICFS 20 11.9 26.2 027 L3559 ICF 20 4 108 1¼ 32 Socket weld, ANSI (B 16.11) ICFS 20 ICFD 20 ICFB 20 ICFS 20 11 .9 26.2 027L3560

# of

modules

Connection size

Appl.

[in.] [mm] M1 M2 M3 M4 M5 M6 kg lbs

Connection type

Module location Wei ght

Code

number

Application 109D2 (CO): Liquid drain M2 with solenoid and stop/check - 1 shut oﬀ

Type

ICF 20 4 109 ¾ 20 Butt-weld DIN-EN 10220 ICFS 20 ICFD 20C ICFE 20 ICFN 20 027L360 9 ICF 20 4 109 1 25 Butt-weld DIN-EN 10220 ICFS 20 ICFD 20C ICFE 20 ICFN 20 027L 3610

# of

modules

Connection size

Appl.

[in.] [mm] M1 M2 M3 M4 M5 M6 kg lbs

Connection type

Module location Wei ght

Code

number

Application 110D1P1 (Ammonia): Liquid drain M2, loaded check valve without solenoid - 2 shut-oﬀ

Type

ICF 20 6 110 ¾ 20 Socket weld, ANSI (B 16.11) ICFS 20 ICFD 20 ICFB 20 ICFC 20P1 ICFB 20 ICFS 20 ICF 20 6 110 1 25 Socket weld, ANSI (B 16.11) ICFS 20 ICFD 20 ICFB 20 ICFC 20P1 ICFB 20 ICFS 20 ICF 20 6 110 1¼

ICAD and coils are not included and must be ordered separately.

# of

modules

Connection size

Appl.

[in.] [mm] M1 M2 M3 M4 M5 M6 kg lbs

Connection type

Socket weld, ANSI (B 16.11) ICFS 20 ICFD 20 ICFB 20

Module location Wei ght

12. 6 2 7.7 027L 3625

ICFC 20P1

ICFB 20 ICFS 20

12. 6 2 7.7

12. 6 2 7.7 027 L3627

Code

number

027L3626

38 | AI251686497769en-US1201

Page 39

Data sheet | Valve station, ICF 15, ICF 20, ICF 25, ICF 50 and 65

Possible module locations

Module locations are indicated by M1, M2, M3, M4, M5 and M6. With respect to refrigerant ﬂow, M1 is closest to inlet.

ICF 15 with four modules

Function Module Type Can be installed in these locations ICFS Shut-oﬀ valve module *(ICFS 15) *(ICFF 15) M4 ICFR Manual regulating valve module *(ICFS 15) *(ICFF 15) M4 ICFF Strainer module *(ICFS 15) *(ICFF 15) ICFE Solenoid valve module *(ICFS 15) *(ICFF 15) M3 ICFC Check valve module *(ICFS 15) *(ICFF 15) M4 ICFN Stop & check valve module *(ICFS 15) *(ICFF 15) M4 ICM Motor operated valve module *(ICFS 15) *(ICFF 15) M3 ICFB Blind top cover *(ICFS 15) *(ICFF 15) M3 M4 ICFA Electronic expansion valve module (for ICF 20 only) *(ICFS 15) *(ICFF 15) M3 ICFO Manual opening module *(ICFS 15) *(ICFF 15) M4 ICFW Welding module *(ICFS 15) *(ICFF 15) M3 M4 ICFD Drain module (for ICF 15 and 20 only) *(ICFS 15) *(ICFF 15) M4

ICF 20 and ICF 25 with four modules

Function Module Type Can be installed in these locations ICFS Shut-oﬀ valve module M1 M2 M3 M4 ICFR Manual regulating valve module M1 M2 M3 M4 ICFF Strainer module M2 M4 ICFE Solenoid valve module M3 ICFC Check valve module M4 ICFN Stop & check valve module M4 ICM Motor operated valve module M1 M3 ICFB Blind top cover M1 M2 M3 M4 ICFA Electronic expansion valve module (for ICF 20 only) M1 M3 ICFE20H Solenoid valve module (for ICF 20 only) M1 M3 ICFO Manual opening module M4 ICFW Welding module M1 M2 M3 M4 ICFD Drain module (for ICF 15 and 20 only) M2 M4

ICF 20 and ICF 25 with six modules

Function Module Type Can be installed in these locations ICFS Shut-oﬀ valve module M1 M2 M3 M4 M5 M6 ICFR Manual regulating valve module M1 M2 M3 M4 M5 M6 ICFF Strainer module M2 M4 M6 ICFE Solenoid valve module M3 ICFC Check valve module M4 M6 ICFN Stop & check valve module M4 M6 ICM Motor operated valve module M1 M3 M5 ICFB Blind top cover M1 M2 M3 M4 M5 M6 ICFA Electronic expansion valve module (for ICF 20 only) M1 M3 M5 ICFE20H Solenoid valve module (for ICF 20 only) M1 M3 M5 ICFO Manual opening module M4 ICFW Welding module M1 M2 M3 M4 M5 M6 ICFD Drain module (for ICF 15 and 20 only) M2 M4 M6

ICF 50 with four modules

Function Module Type Can be installed in these locations SVA-S Shut-oﬀ valve module *(SVA-S 50) M4 ICFB Blind top cover *(SVA-S 50) M2 FIA Strainer module *(SVA-S 50) M2 ICS Pilot-operated valve module *(SVA-S 50) M3 ICM Motor operated valve module *(SVA-S 50) M3 ICLX 2-step solenoid valve module *(SVA-S 50) M3 REG-SB Manual regulating valve module *(SVA-S 50) M4

ICF 65 with three modules

Function Module Type Can be installed in these locations SVA-S Shut-oﬀ valve module *(SVA-S 65) M4 ICFB Blind top cover *(SVA-S 65) FIA Strainer module *(SVA-S 65) ICS Pilot-operated valve module *(SVA-S 65) M3 ICM Motor operated valve module *(SVA-S 65) M3 ICLX 2-step solenoid valve module *(SVA-S 65) M3 REG-SB Manual regulating valve module *(SVA-S 65) M4

location not possible

*) Module is ﬁxed

AI251686497769en-US1201 | 39

Page 40

Data sheet | Valve station, ICF 15, ICF 20, ICF 25, ICF 50 and 65

Ordering accessories Stop valve type SNV-ST

Other SNV types see literature: AI244986497087

For complete list of Spare parts and accessories for ICF 15 to 65 (including SS versions) please refer to AI242886444256

Description Code no.

G½ in. (Qty. 1)

NPT-FPT 3/8 in. (Qty. 1)

148B3778

148B3747

ICAD 600A/ICAD 1200A

Description

ICAD 600A for ICF 15 to 25

ICAD 1200A for ICF 50 and 65

Cable Cable set 10 m.

Cable Cable set 15 m.

Connector Connector set female

Protection cap Protection cap for ICAD

ICAD details see literature: AI236186442940

Code no.

With 1.5 m. cables

027H9075

Without cables

027H9120

With 1.5 m. cables 027H9077

Without cables

027H9122

027H0427

027H0435

027H0430

027H0431

Coils

Special coils for ICFE

Valve type

VoltageVFrequency

With 1 m

3-core

cable

IP 67

Code no.

With

terminal

box

IP 67

With

DIN

plugs**)

Appen-

no.*)

Alternating current a.c.

ICFE

ICS/ICLX (MOPD < 21 Bar)

12 50 018F6706 15

24 50 018F6257 018F6707 018F7358 16

220-230 50 018F6251 018F6701 018F7351 31

115 60 018F6260 018F6710 20

Direct current d.c.

ICFE/ICFA

ICS/ICLX (MOPD < 21 Bar)

Valve type

12 018F6856 01

24 018F6857 02

Voltage

Frequency

Code no.

With

terminal box

IP 67

Appendix no.

Indicates

voltage and

frequency

Alternating current a.c.

ICFE

ICS/ICLX (MOPD < 21 Bar)

For other coil types please refer to the technical leaﬂets for EVRA, AKVA, ICS or ICLX valves.

24 50 018F6807 16

110 50 018F6811 22

220-230 50 018F6801 31

dix

Power

consumption

Holding: 10 W 21 VA

Inrush: 44 VA

20 W

Power

consumption

Holding:

12 W 26 VA

Inrush:

55 VA

40 | AI251686497769en-US1201

Page 41

44 mm

177 mm

133 mm

224 mm

Data sheet | Valve station, ICF 15, ICF 20, ICF 25, ICF 50 and 65

Dimensions

This example indicates the maximum dimensions for the ICF valve stations.

(5.2 in.)

(4.9 in.)

124 mm

(4 in.)

102 mm

(1.7 in.)

ICF 15-4

(7 in.)

50 mm

(2 in.)

(8.8 in.)

194 mm

(7.6 in.)

44 mm

(1.7 in.)

(7 in.)

177 mm

Danfoss

27H595_08-2017

199 mm

(7.8 in.)

AI251686497769en-US1201 | 41

Page 42

Danfoss

260 mm

180 mm

(17.3 in.)

Data sheet | Valve station, ICF 15, ICF 20, ICF 25, ICF 50 and 65

Dimensions

This example indicates the maximum dimensions for the ICF valve stations.

27H213_08-2014

(10.2 in.)

ICF 15-4

440 mm

42 | AI251686497769en-US1201

(7.1 in.)

34 mm

(1.3 in.)

54 mm

(2.1 in.)

194.5 mm (7.7 in.)

88 mm

(3.5 in.)

Page 43

179 mm

87 mm

223 mm

44 mm

177 mm

27H596_08-2017

Data sheet | Valve station, ICF 15, ICF 20, ICF 25, ICF 50 and 65

Dimensions (continued)

This example indicates the maximum dimensions for the ICF valve stations.

(7 in.)

(8.8 in.)

99 mm

(3.9 in.)

(7 in.)

179 mm

ICF 20-4

(3.4 in.)

Danfoss

(1.7 in.)

(7 in.)

220 mm

(8.7 in.)

44 mm (1.7 in.)

177 mm

(7 in.)

AI251686497769en-US1201 | 43

Page 44

Data sheet | Valve station, ICF 15, ICF 20, ICF 25, ICF 50 and 65

Dimensions (continued)

This example indicates the maximum dimensions for the ICF valve stations.

Danfoss

M27L0015_1

ICF 20-4

44 | AI251686497769en-US1201

Page 45

179 mm

87 mm

223 mm

44 mm

177 mm

Data sheet | Valve station, ICF 15, ICF 20, ICF 25, ICF 50 and 65

Dimensions (continued)

This example indicates the maximum dimensions for the ICF valve stations.

(7 in.)

(3.4 in.)

ICF 20-6

Danfoss

27H597_08-2017

(8.8 in.)

(1.7 in.)

(7 in.)

290 mm

(11.4 in.)

44 mm

(1.7 in.)

177 mm

(7 in.)

AI251686497769en-US1201 | 45

Page 46

Danfoss

M27L0016_1

260 mm

(10.2 in.)

Data sheet | Valve station, ICF 15, ICF 20, ICF 25, ICF 50 and 65

Dimensions (continued)

This example indicates the maximum dimensions for the ICF valve stations.

ICF 20-6

46 | AI251686497769en-US1201

Page 47

Danfoss

M27L0051_1

252 mm

(9.9 in.)

58 mm

(2.3 in.)

70 mm

(2.8 in.)

266 mm (10.5 in.)

273 mm

(10.7 in.)

Data sheet | Valve station, ICF 15, ICF 20, ICF 25, ICF 50 and 65

Dimensions (continued)

This example indicates the maximum dimensions for the ICF valve stations.

ICF 25-4

AI251686497769en-US1201 | 47

Page 48

252 mm

(9.9 in.)

59 mm

(2.3 in.)

70 mm

(2.8 in.)

356 mm (14.0 in.)

Danfoss

M27L0050_1

273 mm

(10.7 in.)

Data sheet | Valve station, ICF 15, ICF 20, ICF 25, ICF 50 and 65

Dimensions (continued)

This example indicates the maximum dimensions for the ICF valve stations.

ICF 25-6

48 | AI251686497769en-US1201

Page 49

460

Data sheet | Valve station, ICF 15, ICF 20, ICF 25, ICF 50 and 65

Dimensions (continued)

This example indicates the maximum dimensions for the ICF valve stations.

(18.1 in.)

ICF 50-4

Danfoss

27L25_2015-09

637

(25.1 in.)

(2.8 in.)

AI251686497769en-US1201 | 49

Page 50

418

Data sheet | Valve station, ICF 15, ICF 20, ICF 25, ICF 50 and 65

Dimensions (continued)

This example indicates the maximum dimensions for the ICF valve stations.

(16.5 in.)

ICF 65-3

Danfoss

27L26_2015-09

665

(26.2 in.)

(3.3 in.)

50 | AI251686497769en-US1201

Page 51

Data sheet | Valve station, ICF 15, ICF 20, ICF 25, ICF 50 and 65

51 | AI251686497769en-US1201

Page 52

AI251686497769en-US1201 | 52

Danfoss ICF 15, ICF 20, ICF 25, ICF 50, ICF 65 Data sheet

Specifications and Main Features

Frequently Asked Questions

User Manual