MAKING MODERN LIVING POSSIBLE
H62L-E Heat pump Evaporator
For increased heat pump business
Innovative | Optimised | Low hold-up volume | High heat transfer | Compact | Rapid delivery
Save $35
Per heat exchanger
On refrigerant because the
H62L-E’s low hold-up volume.
20%
Reduction refrigerant
Charge compared to traditional
BPHE. This new evaporator is
the ideal solution to help you
meet the world´s climate and
energy aspirations.
www.danfoss.com
H62L-E
Q4 Q1
Q4 Q1
525/20.7 ”
470/18.5”
Q3 Q2
Q3 Q2
H1 H4
H1 H4
H2 H3
H2 H3
INTRODUCTION
KEY FEATURES
TECHNICAL DATA
n = NUMBER O F PLATES
STANDARD
MATERIALS
STANDARD
CONNECTIONS
63/2. 5”
118 /4. 6”
13.5+1.72 x n
29/1.1”0.53+0.07 x n
The H62L-E is an evaporator optimised for R410A for use in high-eciency ground source (brine/water) heat pumps with capacities of
3-30 kW (10-102 kBTU/hr). The heat exchanger features innovative Micro Plate technology that improves heat transfer and reduces the
amount of material used.
To meet demands for higher COPs in heat pumps, the H62L-E is designed to work eciently with close temperature approaches, while
a low pressure drop on the brine side reduces the pump power and keeps the overall COP high.
The low hold-up volume reduces the refrigerant charge and offers valuable savings.
• Minimal hold up volume: Less refrigerant charge
• Reduced pressure drop: For a more ecient heat pump
• Smaller footprint: Enabling more compact heat pumps
• Reduced CO2 footprint: Environmentally friendly with high heat transfer and minimal refrigerant charge.
Min. working temperature: -196 °C (-320 °F)
Max. working temperature: 200 °C (390 °F)
Max. working pressure: 45 bar (650 psi)
Hold up volume (l): Q1-Q2/ Q3-Q4 (l): 0.081×n/2 / 0.09×(n-2)/2
3
(ft
): Q1-Q2/ Q3-Q4 0.003×n/2 / 0.003×(n-2)/2
Weight: 3.35 kg+0.145×n (7.40lb+0.32×n)
Cover plates: AISI 304L
Connections: AISI 304L
Plates: AISI 316L
Brazing filler: Pure copper
Other matieral combinations can be provided upon request. Contact Danfoss sales representative for more information.
The standard connections below are optimised for this product in evaporator duties in heat pump systems. For other connections, please
contact your Danfoss representative.
Q3 (Refrigerant inlet): soldering 1/2” or 5/8”
Q4 (Refrigerant outlet): soldering 3/4” or 7/8” or 1 3/8”
Q1-Q2 (Brine side): External threaded 1 1/4”
THIRD-PART Y
APPROVALS
ACCESSORIES
– STUD BOLTS
ACCESSIBILITY
CORRESPONDING
Europe: Pressure Equipment Directive (PED). America: Underwriters Laboratory Inc (UL). The third party approvals stated are standard for all our
products. For details of other existing approvals or to discuss how we can meet your local needs, please contact your Danfoss representative.
Stud bolts on front and/or back plates for mounting support are available upon request. Contact Danfoss sales representative for
further information.
We will help you set up a logistics solution that will meet your needs.
A corresponding MPHE for condenser duties (H62L-C) is also available, fully tested and ready for heat pump applications.
CONDENSERS
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reser ves the right to alter its products without notice. This also applies to
products already on order provided that such alterations can be made without consequent changes being necessary in specifications already agreed.
All trademarks in this material are the property of the respective companies. Danfoss and the Danfoss logotype are trademark s of Danfoss A/S. All rights reserved.
520H624 8 DKQB.PD.300.D2.22
produced by M almøresund, ww w.malmoresund.se, p hoto by Lars Owesson, w ww.owesson.s e, March 2012
Loading...