MAKING MODERN LIVING POSSIBLE
H55-C Heat pump Condenser
For increased heat pump business
Innovative | Optimised | Low hold-up volume | High heat transfer | Compact | Rapid delivery
Save $70
Per heat exchanger
On refrigerant because
the H55-C’s low hold-up
volume.
40%
Reduction refrigerant
Charge compared to traditional
BPHE. This new evaporator is
the ideal solution to help you
meet the world´s climate and
energy aspirations.
www.danfoss.com
H55-C
INTRODUCTION
KEY FEATURES
TECHNICAL DATA
n = NUMBER O F PLATES
Q4 Q1Q4 Q1
46 6/18.3 ”
525/20.7 ”
Q3 Q2Q3 Q2
50/2.0”
109/4. 3”
11.5+1.4 4 x n
0.37+0.06 x n 29/1.1”
H1 H4H1 H4
H2 H3H2 H3
Condenser optimised for R407C in high eciency residential heat pumps with capacities between 4-40 kW (13-136 kBTU/hr). The heat
exchanger features innovative Micro Plate technology that improves heat transfer and reduces the amount of material used.
To meet demands for higher COPs in heat pumps, the H55-C is designed to work eciently with close temperature approaches. The
low hold-up volume reduces the refrigerant charge and offers valuable savings.
• Minimal hold up volume: Less refrigerant charge
• High heat transfer: For a more ecient heat pump
• Smaller footprint: Enabling more compact heat pumps
• Reduced CO
footprint: Environmentally friendly with high heat transfer and minimal refrigerant charge.
2
Min. working temperature: -196 °C (-310 °F)
Max. working temperature: 200 °C (390 °F)
Max. working pressure: 30 bar (435 psi)
Hold up volume (l): Q1-Q2/Q3-Q4: 0.076×n/2 / 0.061×(n-2)/2
3
(ft
): Q1-Q2/Q3-Q4: 0.002×n/2 / 0.002×(n-2)/2
Weight: 2.67 kg+0.135n (5.12lb+0.30×n) Max. no. of plates: 150
STANDARD
MATERIALS
Cover plates: AISI 304
Connections: AISI 304
Plates: AISI 316
Brazing filler: Pure copper
Other material combinations are available on request. Please contact your Danfoss sales representative for more information.
STANDARD
CONNECTIONS
Standard connections as per below are optimised for this product as condenser in heat pump system. For other connections, please
contact your Danfoss representative.
Q3 (Refrigerant outlet): soldering 1/4”, 3/8“ or 5/8”
Q4 (Refrigerant inlet): soldering 1/2”, 5/8” or 7/8”
Q1-Q2 (Brine side): External threaded 1”
THIRD- PARTY
APPROVALS
ACCESSORIES
– STUD BOLTS
ACCESSIBILITY
CORRESPONDING
Europe: Pressure Equipment Directive (PED). America: Underwriters Laboratory Inc (UL). The third party approvals stated are standard for all our
products. For details of other existing approvals or to discuss how we can meet your local needs, please contact your Danfoss representative.
Stud bolts on front and/or back plates for mounting suppor t are available upon request. Please contact your Danfoss sales
representative for further information.
We will help you set up a logistic solution that will meet your needs.
A corresponding MPHE for evaporator duties (H55-E) is also available, fully tested and ready for heat pump applications
CONDENSERS
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reser ves the right to alter its products without notice. This also applies to
products already on order provided that su ch alterations can be made without conse quent changes being ne cessary in specific ations already agreed.
All trademarks in this material are the property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A /S. All rights reser ved.
520 H6241 DKQB.PD.300.Q2.22
produced by M almøresund, ww w.malmoresund.se, p hoto by Lars Owesson, w ww.owesson.s e, March 2012
Loading...