MAKING MODERN LIVING POSSIBLE
H30L-C Heat Pump Condenser
For increased heat pump business
Innovative | Optimised | Low hold-up volume | High heat transfer | Compact
12%
Weight Reduction
Compared with traditional
BPHE. This new compact
condenser is the ideal solution
to help you meet the world´s
climate and energy aspirations.
www.danfoss.com
H30L- C
INTRODUCTION
KEY FEATURES
TECHNICAL DATA
n = NUMBER O F PLATES
Q4 Q1Q4 Q1
270 /10.6”
320 /12.6”
Q3 Q2Q3 Q2
45/2.0 ”
95/3. 5”
8+1.24 x n
0.31+0.05 x n
H1 H4H1 H4
H2 H3H2 H3
20/ 1.1”
Condenser optimised for R410A in high eciency residential heat pumps with capacities between 3-25 kW. The H30-C is the ideal
choice in heat pump designs where space is limited and high eciency is required.
The H30-C is designed to work eciently with close temperature approaches to meet demands for higher COPs in heat pumps . The
low hold-up volume reduces the refrigerant charge and offers valuable savings.
• Minimal hold up volume: Less refrigerant charge
• High heat transfer: For a more ecient heat pump
• Smaller footprint: Enabling more compact heat pumps
• Reduced CO
footprint: Environmentally friendly with high heat transfer and minimal refrigerant charge.
2
Min. working temperature: -196 °C (-320 °F)
Max. working temperature: 200 °C (390 °F)
Max. working pressure: 48 bar (696 psi)
Hold up volume (l): Q1-Q2/Q3-Q4: 0.027×n/2 / 0.027×(n-2)/2
(ft3): Q1-Q2/Q3-Q4: 0.001×n/2 / 0.001×(n-2)/2
Weight: 0.89 kg+0.073×n (1.96lb+0.16 × n) Max. no. of plates: 150
STANDARD
MATERIALS
Cover plates: AISI 304
Connections: AISI 304
Plates: AISI 316
Brazing filler: Pure copper
Other material combinations are available on request. Please contact your Danfoss sales representative for more information.
STANDARD
CONNECTIONS
Standard connections as per below are optimised for this product as condenser in heat pump system. For other connections, please
contact your Danfoss representative.
Q3 (Refrigerant outlet): soldering 1/2”, 1/4”, 3/8” or 5/8”
Q4 (Refrigerant inlet): soldering 1/2”, 5/8“, 3/4” or 7/8”
Q1-Q2 (Brine side): External threaded 3/4” or 1”
THIRD- PARTY
APPROVALS
ACCESSORIES
– STUD BOLTS
ACCESSIBILITY
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reser ves the right to alter its products without notice. This also applies to
products already on order provided that su ch alterations can be made without conse quent changes being ne cessary in specific ations already agreed.
All trademarks in this material are the property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A /S. All rights reser ved.
520H6264 DKQB .PD.300.U2.02
Europe: Pressure Equipment Directive (PED). America: Underwriters Laboratory Inc (UL). The third party approvals stated are standard for all our
products. For details of other existing approvals or to discuss how we can meet your local needs, please contact your Danfoss representative.
Stud bolts on front and/or back plates for mounting suppor t are available upon request. Please contact your Danfoss sales
representative for further information.
We will help you set up a logistic solution that will meet your needs.
produced by D anfoss, www.danfo ss.se, photo by Lars O wesson, www.owe sson.se, March 2012
Loading...