Danfoss H30-CW Data sheet

Data sheet

Micro Plate Heat Exchanger

For water loop systems business

H30-CW Water Loop Condenser

Condenser optimised for high efficiency in water loop systems with capacities between 2 – 20 kW. The new innovative Micro Plate technology improves heat transfer and because of the reduced amount of material used, it is very compact.

The H30-CW is designed to work efficiently with close temperature approaches to meet demands for high efficiency in food retail applications.

The low hold-up volume reduces the refrigerant charge and offers valuable savings.

40%

charge compared with a traditional BPHE. The ideal solution to meet the world`s climate and energy spirations.

Features	• Minimal hold up volume: Less refrigerant
	charge
	• High heat transfer: For a more efficient water
	loop systems
	• Reduced CO footprint: Environmentally
	friendly with high heat transfer and minimal
	refrigerant charge

AI314029726643en-000102 | 1

Technical data

n = number of plates

<![if ! IE]>

<![endif]>6”./12 320

<![if ! IE]>

<![endif]>6”./10 270

Q3	Q2		H2	H3
45/2.0”		6+1.24 x n
		6+1.24 x n
95/3.5”		0.24+0.05 x n	20/1.1”

Min. working temperature		-196 °C (-320 °F)
Max. working temperature		200 °C (390 °F)
Max. working pressure		30 bar (435 psi)
Hold up volume	(l)	Q1-Q2/Q3-Q4: 0.018×n/2 / 0.018×(n-2)/2
Hold up volume	(ft3)	Q1-Q2/Q3-Q4: 0.0006×n/2 / 0.0006×(n-2)/2
	(ft3)	Q1-Q2/Q3-Q4: 0.0006×n/2 / 0.0006×(n-2)/2
Weight		0.66 kg+0.073 × n (1.46lb+0.16 × n)
Max. no. of plates		80
Standard materials

Cover plates		AISI 304
Plates		AISI 316
Connections		AISI 304L
Brazing filler		Pure copper

Other material combinations are available on request.

Please contact your Danfoss sales representative for more information.

Standard connections

Standard connections as per below are optimised for this product as condenser. For other connections, please contact your Danfoss representative.

Q3	(Refrigerant outlet)	Soldering 1/4”,	3/8” or 5/8”
Q3	(Refrigerant outlet)	Soldering 1/4”,	3/8” or 5/8”
Q4	(Refrigerant inlet)	Soldering 1/2”,	5/8“ or 7/8”
Q1-Q2 (Water side)		External threaded 3/4”
Q1-Q2 (Water side)		External threaded 3/4”

Third-party	Europe: Pressure Equipment Directive (PED).
approvals	The third party approvals stated are standard for all our products.
	For details of other existing approvals or to discuss how we can meet your local needs,
	please contact your Danfoss representative.

Accessories	Stud bolts on front and/or back plates for mounting support are available upon request.
– stud bolts	Please contact your Danfoss sales representative for further information.

Accessibility	We will help you set up a logistic solution that will meet your needs.

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice.This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary eady agreed.

AI314029726643en-000102 | 2