How it Works
Danfoss
Loading...
H1T 45 cc
Service guide
136 pgs13.63 Mb0
Table of contents
Loading...

Danfoss H1T 45 cc, H1T 53cc Service guide

Parts Manual
H1T 45 and 53cc
Variable displacement tandem pump
www.danfoss.com
H1 Tandem 045/053cc
Revision history Table of revisions
Date Changed Rev
December 2021 Corrected seal carrier assembly part numbers 0802
April 2021 Updated to 'Engineering Tomorrow' design and added missing control options 0801
2 | © Danfoss | December 2021 AX152886482422en-000802
H1 Tandem 045/053cc

Contents

General information
Service Parts Identification............................................................................................................................................................5
Nameplate...........................................................................................................................................................................................5
Date code............................................................................................................................................................................................ 6
About service bulletins...................................................................................................................................................................6
Procedure to identify a part..........................................................................................................................................................7
Regional part numbers............................................................................................................................................................. 7
Example of parts identification (H1T 45/53)......................................................................................................................7
Adobe Acrobat 2-page viewing..................................................................................................................................................8
Order code.......................................................................................................................................................................................... 9
Common parts and special hardware
Common parts................................................................................................................................................................................ 10
Special hardware H1..................................................................................................................................................................... 12
Special hardware H2..................................................................................................................................................................... 14
Special hardware P1......................................................................................................................................................................16
Special hardware P3......................................................................................................................................................................18
Special hardware P4......................................................................................................................................................................20
Special hardware PN.....................................................................................................................................................................22
Rear discplacement
Rear displacement A, C, N...........................................................................................................................................................24
Controls
Control A2, A3................................................................................................................................................................................. 26
Control A4.........................................................................................................................................................................................28
Control A5.........................................................................................................................................................................................30
Control A8.........................................................................................................................................................................................32
Control A9, B1..................................................................................................................................................................................34
Control B5.........................................................................................................................................................................................36
Control B6.........................................................................................................................................................................................38
Control B8.........................................................................................................................................................................................40
Control D7.........................................................................................................................................................................................42
Control D9.........................................................................................................................................................................................44
Control E1......................................................................................................................................................................................... 46
Control G1.........................................................................................................................................................................................48
Control H2.........................................................................................................................................................................................50
Control H4.........................................................................................................................................................................................52
Control M1........................................................................................................................................................................................54
Control M2........................................................................................................................................................................................56
Control N1, N2.................................................................................................................................................................................58
Control N5, N6.................................................................................................................................................................................60
Control NN........................................................................................................................................................................................62
Displacement limitation
Displacement limiter B.................................................................................................................................................................64
Displacement limiter C.................................................................................................................................................................66
Displacement limiter D................................................................................................................................................................ 68
Displacement limiter N................................................................................................................................................................ 70
Orifice
Orifice C1-C9....................................................................................................................................................................................72
Orifice D1-D3................................................................................................................................................................................... 74
Orifice D4, D5...................................................................................................................................................................................76
Center section
Centersection D1............................................................................................................................................................................78
Centersection E7............................................................................................................................................................................ 80
Centersection F7............................................................................................................................................................................ 82
Centersection F9............................................................................................................................................................................ 84
Centersection G6............................................................................................................................................................................86
©
Danfoss | December 2021 AX152886482422en-000802 | 3
H1 Tandem 045/053cc
Contents
Housing
Shaft
Auxiliary mounting
High pressure protection
Charge pump and filtration
Charge pressure setting
Overhaul seal kit
Service bulletins
Mounting flange F, J..................................................................................................................................................................... 88
Shaft B4-G8.......................................................................................................................................................................................90
Aux mounting H1, H2...................................................................................................................................................................92
Aux mounting H3-H8....................................................................................................................................................................94
Aux mounting NN..........................................................................................................................................................................96
Aux mounting T1, T2.....................................................................................................................................................................98
Aux mounting T3, T8..................................................................................................................................................................100
Aux mounting TN........................................................................................................................................................................ 102
HPS 13-28 (port A).......................................................................................................................................................................104
HPS 30-42 (port A).......................................................................................................................................................................106
HPS 13-28 (port B)....................................................................................................................................................................... 108
HPS 30-42 (port B)....................................................................................................................................................................... 110
HPS 13-28 (port C)....................................................................................................................................................................... 112
HPS 30-42 (port C)....................................................................................................................................................................... 114
HPS 13-28 (port D).......................................................................................................................................................................116
HPS 30-42 (port D).......................................................................................................................................................................118
Charge pump M, N......................................................................................................................................................................120
Charge pressure relief setting 20-28.....................................................................................................................................122
Charge pressure relief setting 30-CK....................................................................................................................................124
Overhaul seal kit...........................................................................................................................................................................126
SB-2007-004...................................................................................................................................................................................127
SB-2007-026...................................................................................................................................................................................128
SB-2007-033...................................................................................................................................................................................129
SB-2010-020...................................................................................................................................................................................131
SB-2011-020...................................................................................................................................................................................132
SB-2013-021...................................................................................................................................................................................134
SB-2015-030...................................................................................................................................................................................134
4 | © Danfoss | December 2021 AX152886482422en-000802
Made in U.S.A.
Serial No.
A-06-04-12345
Model Code
Model No./Ident No.
H1T045R A A N A2 C3 N D1 F G7 H7 35 35 35 35 N P 28 PN C01 NNN
1400730
H1 Tandem 045/053cc

General information

Service Parts Identification

Nameplate

The following information and procedure is used to identify the module group, item number, manufacture date, part number, and part name of the parts included in the H1 45/53 tandem pumps.
The parts listed include all parts which may be used when performing either “Minor Repairs”, “Major Repairs” or “Conversions” on the H1T 045/053.
Each unit will have a nameplate affixed to the housing. The nameplate will include the following information:
Model Code
The Danfoss model code completely defines the specific unit and must be used when ordering parts to service this product.
Model Number
The Danfoss model number is used by the factory in manufacturing. On repeat orders, a complete unit can be ordered by the model number.
Serial Number
The Danfoss serial number is used to identify the manufacture date and the unit sequence in the build. The serial number is also used to identify the units warranty time period.
The letter code indicates the location of original manufacture (assembly). The first number (2 digits) indicates the year of manufacture. The second number (2 digits) indicates the
calendar week of manufacture. The third number (5 digits) is a sequential number used to identify a specific unit.
©
Danfoss | December 2021 AX152886482422en-000802 | 5
H1 Tandem 045/053cc
General information

Date code

About service bulletins

The date code is defined as the year and week of manufacture. The same item number may list more than one part number. This indicates that there is more than one configuration for that item number. You will see that there are different date codes for the different part numbers. Find the date code of your unit from the nameplate to determine which service part number you need to order.
Example: The service part desired is item G30
Order Code Item Date Begin Date End Part Number Part Name Qty. per
80 G30 89-17 8000243 End cap gasket 1
G30 89-16 8000151 End cap gasket
(SB-1995-006)
Model/Kit
1
All units using this order code with a date code prior to 89-17 must use part number “8000151.” All units with a date code of 89-17 and newer must use part number “8000243.”
A Service Bulletin Number (SB-_ _ _ _ - _ _ _) may follow the “Part Name” of the part you desire. You must read that Service Bulletin prior to ordering that part. The information contained in these Service Bulletins, as of the print date of this bulletin, are included at the end of this manual. Service Bulletins contain more detailed information such as interchangeability, what additional parts are involved, etc. It is suggested that you add additional Service Bulletins to this manual as you receive them.
6 | © Danfoss | December 2021 AX152886482422en-000802
H1 Tandem 045/053cc
General information

Procedure to identify a part

The modular design of this product results in a simplified service parts list and part number identification procedure.
The same item numbers are used for same part names on all units within a product type. A part number that has another number following it in parentheses is done to make this a world wide manual.

Regional part numbers

Some part numbers are region specific and should be ordered accordingly. As an example, the part number (example: 314583 (9008000-0118) will be used. The first number is sold
in Germany. The number in parentheses is sold in the United States. Customers would order 9008000-0118 if ordering the part in the United States.

Example of parts identification (H1T 45/53)

The nameplate on an H1 pump has an Order Code of H1T045R A A N A2 C3 N D1 F G7 H7 35 35 3535 N P 28 PN C01 NNN. Use the following procedures to determine the part number of the driveshaft used on this pump.
1. Refer to the input shaft module in the order code. The input shaft option for this pump is identified by the code “G7” (H1T045R A A N A2 C3 N D1 F G7 H7 35 35 35 35 N P 28 PNC01 NNN).
2. Refer to the service parts list and find the shaft group.
3. Find the order code that relates tot his unit, which is “G7.”
The shaft is found to be item J100 and part number 141942.
©
Danfoss | December 2021 AX152886482422en-000802 | 7
H1 Tandem 045/053cc
General information

Adobe Acrobat 2-page viewing

While viewing manual in Adobe Acrobat, the following settings need to be applied to ensure proper page display.
1. Select “View” → “Page Display” → “Two Page View”
2. Select “View” → “Page Display” → “Show Cover Page in Two Page View”
8 | © Danfoss | December 2021 AX152886482422en-000802
T
045
N
F
N
N
PN
Series
Frame
Size
Rear displacement
Displacement limitation
End cap
Control
Mounting flange
Input shaft
Auxiliary mounting
High pressure setting, port A
High pressure setting, port B
High pressure setting, port C
High pressure setting, port D
DC F GEH SJ
P
TK M N P R X
NNNC01
Y
W
V
Charge pump
Filtration
Paint and nametag
Settings
Charge relief pressure setting
Special hardware features
Product Type
R
Rotation
Orifice
28
33
33
33
33
H7
G7
D1
C3
A2
H1
A A
Product
Version
Port
Configuration
H1 Tandem 045/053cc
General information

Order code

©
Danfoss | December 2021 AX152886482422en-000802 | 9
C020
B030
B010
C020
D070
B010
B010
B010
QD075
D071
QD075
QC10
C20
C15
C25
H1 Tandem 045/053cc

Common parts and special hardware

H1T common parts

Common parts

10 | © Danfoss | December 2021 AX152886482422en-000802
H1 Tandem 045/053cc
Common parts and special hardware
Item Date Begin Date End Part Number Part Name Qty per
B010 06-06 5000757 Dowel pin 4 B030 06-06 141959 Coupling 1 C020 06-06 9004700-1907 Valve plate pin 2 C15 06-06 140625 Slipper retainer ball guide 1 C20 06-06 141946 Slipper retainer 1 C25 06-06 4700091 Slipper hold down pin 3 D070 12-21 11068328 Swashplate (SB-2011-020 on page 132) 1 D070 06-06 12-20 11098280 Swashplate replacement kit 1 D071 12-21 11068328 Swashplate (SB-2011-020 on page 132) 1 D071 06-06 12-20 11098280 Swashplate replacement kit 1 QC10 06-06 11020841 Slipper/piston kit, 45 cc 1 QC10 06-06 11020932 Slipper/piston kit, 53 cc 1 QD075 06-06 11085533 Swashplate bearing kit (SB-2010-020 on page
131)
Model/Kit
2
©
Danfoss | December 2021 AX152886482422en-000802 | 11
C010
QC50
C025
C026
R200
*K008
*K009
*K010
*K008
*K009
*K010
P200
*K008
*K009
*K010
N200
M200
*K008
*K009
*K010
D692
D703
D692
D703
H1 Tandem 045/053cc
Common parts and special hardware
H1T special hardware H1
Parts configuration
* Included in overhaul seal kit Q210.
12 | © Danfoss | December 2021 AX152886482422en-000802
H1 Tandem 045/053cc
Common parts and special hardware
Common parts
Item Date Begin Date End Part Number Part Name Qty. per
C010 14-33 141631 Cylinderblock kit, 45 cc 1 C010 14-33 141632 Cylinderblock kit, 53 cc 1 C025 14-33 11071901 Valveplate kit, CW 1 C026 14-33 11071912 Valveplate kit, CCW 1 D692 14-33 11185938 Control handle 1 D703 14-33 11173701 Screw, M6 20 1 D792 14-33 11185938 Control handle 1 D793 14-33 11173701 Screw, M6 20 1 K008 14-33 9004201-6200 O-ring 4 K009 14-33 9006110-0160 Back up ring 4 K010 14-33 9004105-0160 O-ring 4 M200 14-33 4800589 SCR plug assembly 1 N200 14-33 4800589 SCR plug assembly 1 P200 14-33 4800589 SCR plug assembly 1 R200 14-33 4800589 SCR plug assembly 1
Model/Kit
Order code: H1 ("L" rotation tandem pump)
QC50 14-33 141553 Cylinderblock assembly, 45 cc 1 QC50 14-33 141554 Cylinderblock assembly, 53 cc 1
Order code: H1 ("R" rotation tandem pump)
QC50 14-33 141553 Cylinderblock assembly, 45 cc 1 QC50 14-33 141554 Cylinderblock assembly, 53 cc 1
©
Danfoss | December 2021 AX152886482422en-000802 | 13
C010
QC50
C025
C026
*K006
*K008
*K009
*K010
M200
*K008
*K009
*K010
*K006
P200
*K008
*K009
*K010
*K006
N200
*K006
*K008
*K009
*K010
R200
D692
D703
D692
D703
H1 Tandem 045/053cc
Common parts and special hardware
H1T special hardware H2
Parts configuration
* Included in overhaul seal kit Q210.
14 | © Danfoss | December 2021 AX152886482422en-000802
H1 Tandem 045/053cc
Common parts and special hardware
Common parts
Item Date Begin Date End Part Number Part Name Qty. per
C010 16-19 141631 Cylinderblock kit, 45 cc 1 C010 16-19 141632 Cylinderblock kit, 53 cc 1 D692 16-19 11185938 Control handle 1 D703 16-19 11173701 Screw, M6 20 1 D792 16-19 11185938 Control handle 1 D793 16-19 11173701 Screw, M6 20 1 K006 16-19 9004105-0130 O-ring 4 K008 16-19 9004201-6200 O-ring 4 K009 16-19 9006110-0160 Back up ring 4 K010 16-19 9004105-0160 O-ring 4 M200 16-19 11027133 NCV bypass plug assembly 1 N200 16-19 11027133 NCV bypass plug assembly 1 P200 16-19 11027133 NCV bypass plug assembly 1 QC50 16-19 141553 Cylinderblock assembly, 45 cc 1 QC50 16-19 141554 Cylinderblock assembly, 53 cc 1 R200 16-19 11027133 NCV bypass plug assembly 1
Model/Kit
Order code: H2 ("L" rotation tandem pump)
C026 16-19 11071901 Valveplate kit, CW 1 C025 16-19 11071912 Valveplate kit, CCW 1
Order code: H2 ("R" rotation tandem pump)
C025 16-19 11071912 Valveplate kit, CCW 1 C026 16-19 11071901 Valveplate kit, CW 1
©
Danfoss | December 2021 AX152886482422en-000802 | 15
C010
QC50
C025
C026
R200
*K008
*K009
*K010
*K008
*K009
*K010
P200
*K008
*K009
*K010
N200
M200
*K008
*K009
*K010
H1 Tandem 045/053cc
Common parts and special hardware
H1T special hardware P1
Parts configuration
* Included in overhaul seal kit Q210.
16 | © Danfoss | December 2021 AX152886482422en-000802
H1 Tandem 045/053cc
Common parts and special hardware
Common parts
Item Date Begin Date End Part Number Part Name Qty. per
C010 06-06 141631 Cylinderblock kit, 45 cc 1 C010 06-06 141632 Cylinderblock kit, 53 cc 1 K008 06-06 9004201-6200 O-ring 4 K009 06-06 9006110-0160 Back up ring 4 K010 06-06 9004105-0160 O-ring 4 M200 06-06 4800589 SCR plug assembly 1 N200 06-06 4800589 SCR plug assembly 1 P200 06-06 4800589 SCR plug assembly 1 QC50 06-06 141553 Cylinderblock assembly, 45 cc 1 QC50 06-06 141554 Cylinderblock assembly, 53 cc 1 R200 06-06 4800589 SCR plug assembly 1
Order code: P1 ("L" rotation tandem pump)
C025 06-06 11071901 Valveplate kit, CW 1 C026 06-06 11071912 Valveplate kit, CCW 1
Model/Kit
Order code: P1 ("R" rotation tandem pump)
C025 06-06 11071912 Valveplate kit, CCW 1 C026 06-06 11071901 Valveplate kit, CW 1
©
Danfoss | December 2021 AX152886482422en-000802 | 17
C010
QC50
C025
C026
*K006
*K008
*K009
*K010
M200
*K008
*K009
*K010
*K006
P200
*K008
*K009
*K010
*K006
N200
*K006
*K008
*K009
*K010
R200
H1 Tandem 045/053cc
Common parts and special hardware
H1T special hardware P3
Parts configuration
* Included in overhaul seal kit Q210.
18 | © Danfoss | December 2021 AX152886482422en-000802
H1 Tandem 045/053cc
Common parts and special hardware
Item Date Begin Date End Part Number Part Name Qty. per
C010 06-06 141631 Cylinderblock kit, 45 cc 1 C010 06-06 141632 Cylinderblock kit, 53 cc 1 K006 06-06 9004105-0130 O-ring 4 K008 06-06 9004201-6200 O-ring 4 K009 06-06 9006110-0160 Back up ring 4 K010 06-06 9004105-0160 O-ring 4 M200 06-06 11027133 NCV bypass plug assembly 1 N200 06-06 11027133 NCV bypass plug assembly 1 P200 06-06 11027133 NCV bypass plug assembly 1 QC50 06-06 141553 Cylinderblock assembly, 45 cc 1 QC50 06-06 141554 Cylinderblock assembly, 53 cc 1 R200 06-06 11027133 NCV bypass plug assembly 1
Model/Kit
Order code: P3 ("L" rotation tandem pump)
C025 06-06 11071901 Valveplate kit, CW 1 C026 06-06 11071912 Valveplate kit, CCW 1
Order code: P3 ("R" rotation tandem pump)
C025 06-06 11071912 Valveplate kit, CCW 1 C026 06-06 11071901 Valveplate kit, CW 1
©
Danfoss | December 2021 AX152886482422en-000802 | 19
C010
QC50
C025
C026
R200
*K008
*K009
*K010
*K008
*K009
*K010
P200
*K008
*K009
*K010
N200
M200
*K008
*K009
*K010
H1 Tandem 045/053cc
Common parts and special hardware
H1T special hardware P4
Parts configuration
* Included in overhaul seal kit Q210
20 | © Danfoss | December 2021 AX152886482422en-000802
H1 Tandem 045/053cc
Common parts and special hardware
Common parts
Item Date Begin Date End Part Number Part Name Qty. per
C010 06-06 11030567 Cylinderblock kit, with speed ring, 45 cc 1 C010 06-06 11030568 Cylinderblock kit, with speed ring, 53 cc 1 K008 06-06 9004201-6200 O-ring 4 K009 06-06 9006110-0160 Back up ring 4 K010 06-06 9004105-0160 O-ring 4 M200 06-06 4800589 SCR plug assembly 1 N200 06-06 4800589 SCR plug assembly 1 P200 06-06 4800589 SCR plug assembly 1 QC50 06-06 11030569 Cylinderblock assembly, with speed ring, 45 cc 1 QC50 06-06 11030570 Cylinderblock assembly, with speed ring, 53 cc 1 R200 06-06 4800589 SCR plug assembly 1
Order code: P4 ("L" rotation tandem pump)
C025 06-06 11071901 Valveplate kit, CW 1 C026 06-06 11071912 Valveplate kit, CCW 1
Model/Kit
Order code: P4 ("R" rotation tandem pump)
C025 06-06 11071912 Valveplate kit, CCW 1 C026 06-06 11071901 Valveplate kit, CW 1
©
Danfoss | December 2021 AX152886482422en-000802 | 21
C010
QC50
C025
C026
R200
*K008
*K009
*K010
*K008
*K009
*K010
P200
*K008
*K009
*K010
N200
M200
*K008
*K009
*K010
H1 Tandem 045/053cc
Common parts and special hardware
H1T special hardware PN
Parts configuration
* Included in overhaul seal kit Q210
22 | © Danfoss | December 2021 AX152886482422en-000802
H1 Tandem 045/053cc
Common parts and special hardware
Common parts
Item Date Begin Date End Part Number Part Name Qty. per
C010 06-06 141631 Cylinderblock kit, 45 cc 1 C010 06-06 141632 Cylinderblock kit, 53 cc 1 K008 06-06 9004201-6200 O-ring 4 K009 06-06 9006110-0160 Back up ring 4 K010 06-06 9004105-0160 O-ring 4 M200 06-06 4800589 SCR plug assembly 1 N200 06-06 4800589 SCR plug assembly 1 P200 06-06 4800589 SCR plug assembly 1 QC50 06-06 141553 Cylinderblock assembly, 45 cc 1 QC50 06-06 141554 Cylinderblock assembly, 53 cc 1 R200 06-06 4800589 SCR plug assembly 1
Order code: PN ("L" rotation tandem pump)
C025 06-06 11071901 Valveplate kit, CW 1 C026 06-06 11071912 Valveplate kit, CCW 1
Model/Kit
Order code: PN ("R" rotation tandem pump)
C025 06-06 11071912 Valveplate kit, CCW 1 C026 06-06 11071901 Valveplate kit, CW 1
©
Danfoss | December 2021 AX152886482422en-000802 | 23
QC10R
C20
C15
C25
QC50R
C011
H1 Tandem 045/053cc

Rear discplacement

H1T rear displacement A, C, N
Parts configuration
24 | © Danfoss | December 2021 AX152886482422en-000802
H1 Tandem 045/053cc
Rear discplacement
Order code: A (H1T053)
Item Date Begin Date End Part Number Part Name Qty. per
C011 06-06 141631 Cylinderblock kit, 45 cc 1 C15 06-06 140625 Slipper retainer ball guide 1 C20 06-06 141946 Slipper retainer 1 C25 06-06 4700091 Slipper hold down pin 3 QC10R 06-06 11020841 Slipper/piston kit, 45 cc 1 QC50R 06-06 141553 Cylinderblock assembly, 45 cc 1
Order code: C (H1T045)
C011 06-06 141632 Cylinderblock kit, 53 cc 1 C15 06-06 140625 Slipper retainer ball guide 1 C20 06-06 141946 Slipper retainer 1 C25 06-06 4700091 Slipper hold down pin 3 QC10R 06-06 11020932 Slipper/piston kit, 53 cc 1 QC50R 06-06 141554 Cylinderblock assembly, 53 cc 1
Model/Kit
Order code: N (H1T045)
C011 06-06 141631 Cylinderblock kit, 45 cc 1 C15 06-06 140625 Slipper retainer ball guide 1 C20 06-06 141946 Slipper retainer 1 C25 06-06 4700091 Slipper hold down pin 3 QC10R 06-06 11020841 Slipper/piston kit, 45 cc 1 QC50R 06-06 141553 Cylinderblock assembly, 45 cc 1
Order code: N (H1T053)
C011 06-06 141632 Cylinderblock kit, 53 cc 1 C15 06-06 140625 Slipper retainer ball guide 1 C20 06-06 141946 Slipper retainer 1 C25 06-06 4700091 Slipper hold down pin 3 QC10R 06-06 11020932 Slipper/piston kit, 53 cc 1 QC50R 06-06 141554 Cylinderblock assembly, 53 cc 1
©
Danfoss | December 2021 AX152886482422en-000802 | 25
D300
D300
D301
D301
D201
QD25
*QD26
D050
D050
*D150
*QD26
QD100
QD25
D250
*D060
QD27
QD29
QD28
QD27
QD29
QD28
D065
*D151
D251
*QD26R
D050
QD25R
QD25R
*QD26R
QD101
*D060
D050
D065
QD27R
QD29R
QD28R
QD27R
QD29R
QD28R
D200
H1 Tandem 045/053cc

Controls

H1T control A2, A3
Parts configuration
* Included in overhaul seal kit Q210
26 | © Danfoss | December 2021 AX152886482422en-000802
H1 Tandem 045/053cc
Controls
Common parts
Item Date Begin Date End Part Number Part Name Qty. per
D050 06-06 716860 Screw, M5 x 12 12 D060 06-06 612291 (9003508-0008) Seal nut 2 D065 06-06 327007 Plug assembly 2 D150 06-06 11173377 Control gasket 1 D151 06-06 11173377 Control gasket 1 D200 06-06 11202172 Swashplate feedback link 1 D201 06-06 11202172 Swashplate feedback link 1 D250 06-06 505038 Screw, M6 x 45 6 D251 06-06 505038 Screw, M6 x 45 6 D300 06-06 310979 Dowel pin 2 D301 06-06 310979 Dowel pin 2 QD26 06-06 11001952 O-ring 2 QD26R 06-06 11001952 O-ring 2 QD28 06-06 063172 O-ring 2 QD28R 06-06 063172 O-ring 2 QD29 06-06 11027046 Coil nut 2 QD29R 06-06 11027046 Coil nut 2
Model/Kit
Order code: A2
QD25 06-06 11012457 Proportional solenoid, 12V 2 QD25R 06-06 11012457 Proportional solenoid, 12V 2 QD27 06-06 11028018 Coil kit, 12V, DEUTSCH connector 2 QD27R 06-06 11028018 Coil kit, 12V, DEUTSCH connector 2 QD100 06-06 11019680 EDC kit, 12V, high gain spool 1 QD101 06-06 11019680 EDC kit, 12V, high gain spool 1
Order code: A3
QD25 06-06 11012459 Proportional solenoid, 24V (SB-2007-033 on page
129)
QD25R 06-06 11012459 Proportional solenoid, 24V (SB-2007-033 on page
129)
QD27 06-06 11028019 Coil kit, 24V, DEUTSCH connector (SB-2007-033
on page 129)
QD27R 06-06 11028019 Coil kit, 24V, DEUTSCH connector (SB-2007-033
on page 129) QD100 06-06 11019681 EDC kit, 24V, high gain spool 1 QD101 06-06 11019681 EDC kit, 24V, high gain spool 1
2
2
2
2
©
Danfoss | December 2021 AX152886482422en-000802 | 27
D300
D300
D301
D301
D201
D200
*D151
D251
*QD26R
D050
QD25R
QD25R
QD27R
*QD26R
QD101
*D060
D050
D065
QD29R
QD28R
QD30R
QD29R
QD28R
QD30R
QD27R
QD25
*QD26
D250
D050
D050
*D150
QD27
*QD26
QD100
QD25
QD27
*D060
D065
QD29
QD28
QD30
QD29
QD28
QD30
H1 Tandem 045/053cc
Controls
H1T control A4
Parts configuration
* Included in overhaul seal kit Q210
28 | © Danfoss | December 2021 AX152886482422en-000802
H1 Tandem 045/053cc
Controls
Order code: A4
Item Date Begin Date End Part Number Part Name Qty. per
D050 06-06 716860 Screw, M5 x 12 12 D060 06-06 612291 (9003508-0008) Seal nut 2 D065 06-06 327007 Plug 2 D150 06-06 11173377 Control gasket 1 D151 06-06 11173377 Control gasket 1 D200 06-06 11202172 Swashplate feedback link 1 D201 06-06 11202172 Swashplate feedback link 1 D250 06-06 505038 Screw, M6 x 45 6 D251 06-06 505038 Screw, M6 x 45 6 D300 06-06 310979 Dowel pin 2 D301 06-06 310979 Dowel pin 2 QD25 06-06 140750 Proportional solenoid, 12V, DEUTSCH connector 2 QD25R 06-06 140750 Proportional solenoid, 12V, DEUTSCH connector 2 QD26 06-06 11001952 O-ring 2 QD26R 06-06 11001952 O-ring 2 QD27 06-06 11004698 Coil kit, 12V, DEUTSCH connector 2 QD27R 06-06 11004698 Coil kit, 12V, DEUTSCH connector 2 QD28 06-06 063172 O-ring 2 QD28R 06-06 063172 O-ring 2 QD29 06-06 11004749 Coil nut 2 QD29R 06-06 11004749 Coil nut 2 QD30 06-06 11027883 Cap 2 QD30R 06-06 11027883 Cap 2 QD100 06-06 11019732 EDC kit, 12V, high gain spool, manual override 1 QD101 06-06 11019732 EDC kit, 12V, high gain spool, manual override 1
Model/Kit
©
Danfoss | December 2021 AX152886482422en-000802 | 29
D300
D300
D301
D301
D201
D200
*D151
D251
*QD26R
D050
QD25R
QD25R
QD27R
*QD26R
QD101
*D060
D050
D065
QD29R
QD28R
QD30R
QD29R
QD28R
QD30R
QD27R
QD25
*QD26
D250
D050
D050
*D150
QD27
*QD26
QD100
QD25
QD27
*D060
D065
QD29
QD28
QD30
QD29
QD28
QD30
H1 Tandem 045/053cc
Controls
H1T control A5
Parts configuration
* Included in overhaul seal kit Q210
30 | © Danfoss | December 2021 AX152886482422en-000802
Loading...
+ 106 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use