Danfoss H1P 60, H1P 68cc Service guide
Parts Manual
Variable Displacement Pump
H1P 60 and 68cc
www.danfoss.com
Parts Manual
H1P 60 and 68cc
Revision history Table of revisions
Date Changed Rev
March 2022 Updated H1 and H2 auxiliary mounting part numbers 0801
August 2021 Added new options; updated automotive controls part numbers 0701
December 2020 Moved pressure limiter screens from housing kits to pressure limiter kits 0601
May 2020 Changed document number from 'AX00000132' to 'AX152886482806' and corrected CCO
part numbers
January 2020 Updated control gasket part numbers 0405
June 2019 Updated part numbers; added new options 0404
February 2019 Added various new options 0403
November 2018 Updated to Engineering Tomorrow design 0402
0507
2 | © Danfoss | March 2022 AX152886482806en-000801
Parts Manual
H1P 60 and 68cc
Contents
General information
Service parts identification........................................................................................................................................................... 5
Nameplate...........................................................................................................................................................................................5
Date code............................................................................................................................................................................................ 6
About service bulletins...................................................................................................................................................................6
Procedure to identify a part..........................................................................................................................................................7
Regional part numbers............................................................................................................................................................. 7
Example of a part identification (H1P 60)...........................................................................................................................7
Adobe Acrobat 2-page viewing..................................................................................................................................................8
Order code.......................................................................................................................................................................................... 9
Common parts and special hardware
Special hardware H1-PN..............................................................................................................................................................10
Controls
Control A2, A3................................................................................................................................................................................. 14
Control A4, A5................................................................................................................................................................................. 16
Control A6.........................................................................................................................................................................................18
Control A7.........................................................................................................................................................................................20
Control A8.........................................................................................................................................................................................22
Control A9, B1..................................................................................................................................................................................24
Control B5.........................................................................................................................................................................................26
Control B7.........................................................................................................................................................................................28
Control B8.........................................................................................................................................................................................30
Control B9.........................................................................................................................................................................................32
Control C1.........................................................................................................................................................................................34
Control C2.........................................................................................................................................................................................36
Control C3.........................................................................................................................................................................................38
Control E2......................................................................................................................................................................................... 40
Control E5......................................................................................................................................................................................... 42
Control E6, E7...................................................................................................................................................................................44
Control E8......................................................................................................................................................................................... 46
Control F1, F2...................................................................................................................................................................................48
Control F4......................................................................................................................................................................................... 50
Control G6.........................................................................................................................................................................................52
Control H2, H3.................................................................................................................................................................................54
Control H6, H7.................................................................................................................................................................................56
Control H8, H9.................................................................................................................................................................................58
Control J1, J2....................................................................................................................................................................................60
Control J3, J4....................................................................................................................................................................................62
Control M1, M2............................................................................................................................................................................... 64
Control M3, M4............................................................................................................................................................................... 66
Control M5, M6............................................................................................................................................................................... 68
Control N1, N2.................................................................................................................................................................................70
Control N3, N4.................................................................................................................................................................................72
Control N5, N6.................................................................................................................................................................................74
Control N7, N8.................................................................................................................................................................................76
Control ND, NN............................................................................................................................................................................... 78
Control P5......................................................................................................................................................................................... 80
Control P6, P7..................................................................................................................................................................................82
Control P8, P9..................................................................................................................................................................................84
Control R3......................................................................................................................................................................................... 86
Control R4......................................................................................................................................................................................... 88
Control T6, T7.................................................................................................................................................................................. 90
Control T8, T9.................................................................................................................................................................................. 92
Control U1, U2.................................................................................................................................................................................94
Control U3, U4.................................................................................................................................................................................96
Displacement limitation
Displacement limitation B-N......................................................................................................................................................98
©
Danfoss | March 2022 AX152886482806en-000801 | 3
Parts Manual
H1P 60 and 68cc
Contents
Orifice
Orifice C1-E1..................................................................................................................................................................................102
End cap
End cap D3, D6............................................................................................................................................................................. 106
End cap D8, F4.............................................................................................................................................................................. 108
End cap F5, F6...............................................................................................................................................................................110
End cap G9..................................................................................................................................................................................... 112
Housing and shafts
Housing H, K.................................................................................................................................................................................. 114
Shaft E1-G1.....................................................................................................................................................................................116
Auxiliary mounting
Auxiliary mounting H1-H6........................................................................................................................................................118
Auxiliary mounting H9, NN...................................................................................................................................................... 120
High pressure settings
Port A................................................................................................................................................................................................122
High pressure setting F01-F07.......................................................................................................................................... 122
High pressure setting K18-K48..........................................................................................................................................124
High pressure setting L15-L48...........................................................................................................................................128
Port B................................................................................................................................................................................................132
High pressure setting F01-F07.......................................................................................................................................... 132
High pressure setting K18-K48..........................................................................................................................................134
High pressure setting L15-L48...........................................................................................................................................138
Charge pump, filtration and charge pressure relief
Charge pump C-N........................................................................................................................................................................142
Filtration and charge pressure relief.....................................................................................................................................144
Overhaul seal kit
Seal kit..............................................................................................................................................................................................146
Service bulletin
SB-2006-030...................................................................................................................................................................................147
SB-2009-007...................................................................................................................................................................................148
SB-2013-019...................................................................................................................................................................................150
SB-2015-035...................................................................................................................................................................................151
SB-2016-028...................................................................................................................................................................................153
SB-2016-033...................................................................................................................................................................................154
SB-2016-034...................................................................................................................................................................................155
SB-2018-025...................................................................................................................................................................................156
SB-2020-029...................................................................................................................................................................................157
SB-2021-014...................................................................................................................................................................................158
4 | © Danfoss | March 2022 AX152886482806en-000801
Made in U.S.A.
Serial No.
A-10-36-23456
Model Code
Model No./Ident No.
H1P060 L A A A4 C2 N
D8 H G1 NN L 43 L 43
F P 24 PN NNN NNN
83004785
Parts Manual
H1P 60 and 68cc
General information
Service parts identification
Nameplate
The following information and procedure is used to identify the module group, item number,
manufacture date, part number, and part name of the parts included in the H1P 60 and 68cc.
The parts listed include all parts which may be used when performing either “Minor Repairs”, “Major
Repairs” or “Conversions” on the H1P 60/68.
Each unit will have a nameplate affixed to the housing. The nameplate of the H1P 60/68 will include the
following information:
Model code
The Danfoss model code completely defines the specific unit and must be used when ordering parts to
service this product.
Model/material number
The Danfoss model number (also known as material number) is used by the factory in manufacturing. On
repeat orders, a complete unit can be ordered by the model number.
Serial number
The Danfoss serial number is used to identify the manufacture date and the unit sequence in the build.
The serial number is also used to identify the units warranty time period.
The letter code indicates the location of original manufacture (assembly).
The first number (2 digits) indicates the year of manufacture. The second number (2 digits) indicates the
calendar week of manufacture.
The third number (5 digits) is a sequential number used to identify a specific unit.
©
Danfoss | March 2022 AX152886482806en-000801 | 5
Parts Manual
H1P 60 and 68cc
General information
Date code
About service bulletins
The date code is defined as the year and week of manufacture. The same item number may list more than
one part number. This indicates that there is more than one configuration for that item number. You will
see that there are different date codes for the different part numbers. Find the date code of your unit
from the nameplate to determine which service part number you need to order.
Example: The service part desired is item G30
Order Code Item Date Begin Date End Part Number Part Name Qty. per
80 G30 89-17 8000243 End cap gasket 1
G30 89-16 8000151 End cap gasket
(SB-1995-006)
Model/Kit
1
All units using this order code with a date code prior to 89-17 must use part number “8000151.” All units
with a date code of 89-17 and newer must use part number “8000243.”
A Service Bulletin Number (SB-_ _ _ _ - _ _ _) may follow the “Part Name” of the part you desire. You must
read that Service Bulletin prior to ordering that part. The information contained in these Service Bulletins,
as of the print date of this bulletin, are included at the end of this manual. Service Bulletins contain more
detailed information such as interchangeability, what additional parts are involved, etc. It is suggested
that you add additional Service Bulletins to this manual as you receive them.
6 | © Danfoss | March 2022 AX152886482806en-000801
Parts Manual
H1P 60 and 68cc
General information
Procedure to identify a part
The modular design of this product results in a simplified service parts list and part number identification
procedure.
The same item numbers are used for same part names on all units within a product type. A part number
that has another number following it in parentheses is done to make this a world wide manual.
Regional part numbers
Some part numbers are region specific and should be ordered accordingly.
As an example, the part number (example: 314583 (9008000-0118) will be used. The first number is sold
in Germany. The number in parentheses is sold in the United States. Customers would order
9008000-0118 if ordering the part in the United States.
Example of a part identification (H1P 60)
The nameplate on an H1 pump has an Order Code of H1P60 L A A4 C2 N D8 H G1 NN L 43 L 43 F P 24 NN
NNN NNN. The following procedures will explain how to determine the part number of the drive shaft
used on this pump as an example.
1. Refer to the input shaft module (see Order code on page 9 and find the order code.
The order code for the input shaft module is "G1" (H1P60 L A A4 C2 N D8 H G1 NN L 43 L 43 F P 24 NN
NNN NNN)
2. In the service parts list, find the shaft group and the order code that relates to this unit (G1).
The shaft is found to be item J100 and part number 11038238.
©
Danfoss | March 2022 AX152886482806en-000801 | 7
Parts Manual
H1P 60 and 68cc
General information
Adobe Acrobat 2-page viewing
While viewing manual in Adobe Acrobat, the following settings need to be applied to ensure proper
page display.
1. Select “View” → “Page Display” → “Two Page View”
2. Select “View” → “Page Display” → “Show Cover Page in Two Page View”
8 | © Danfoss | March 2022 AX152886482806en-000801
Orifice
Displacement limitation
End cap
Control
Mounting flange
Input shaft
Auxiliary mounting
High pressure setting, port A
High pressure setting, port B
Charge pump
Filtration
Paint and nametag
Settings
Charge relief pressure setting
Special hardware features
P
H
N
F
PN
Series
Frame
Size
D F
G
E
H J SPTK M N
NNNXNNNL43L43
Y
W
V
24
Product Type
L
Rotation
NNG1
D8C2A4
H1
060
A A
Product
Version
Port
Configuration
Parts Manual
H1P 60 and 68cc
General information
Order code
©
Danfoss | March 2022 AX152886482806en-000801 | 9
B010
B010
QD075
D070
C025
C020
QC10
C20
C15
C25
C010
QC50
QC10
C20
C15
C25
C010
QC50
D692
D703
(H1, M1, NN, P1, PN)
(M2, P2, P4)
Parts Manual
H1P 60 and 68cc
Common parts and special hardware
H1P 60/68 special hardware H1-PN and common parts
Parts configuration
Generic end cap, control and housing used to show part location only.
10 | © Danfoss | March 2022 AX152886482806en-000801
Parts Manual
H1P 60 and 68cc
Common parts and special hardware
Common parts
Item Date Begin Date End Part Number Part Name Qty. per
B010 10-48 5000757 Dowel pin 2
C020 10-48 9004700-1907 Valve plate pin 1
C025 10-48 11082840 Valve plate, CCW 1
C025 10-48 11081201 Valve plate, CW 1
C15 10-48 11033139 Slipper retainer guide 1
C20 10-48 11033140 Slipper retainer 1
C25 10-48 11040075 Slipper hold down pin 4
D070 10-48 11121000 Swashplate 1
QC10 10-48 11087709 Slipper/piston kit, 60 cc 1
QC10 10-48 11087710 Slipper/piston kit, 68 cc 1
QD075 10-48 11086555 Swashplate bearing kit 1
Special hardware
Model/Kit
Order code: H1
C010 14-33 11050563 Cylinder block kit, 60 cc 1
C010 14-33 11033143 Cylinder block kit, 68 cc 1
D692 14-33 11185938 Control handle 1
D703 14-33 11173701 Screw, M6 x 20 1
QC50 14-33 11050267 Cylinder block assembly, 60 cc 1
QC50 14-33 11033144 Cylinder block assembly, 68 cc 1
Order code: P1 (replaced M1)
C010 10-48 11050563 Cylinder block kit, 60 cc 1
C010 10-48 11033143 Cylinder block kit, 68 cc 1
QC50 10-48 11050267 Cylinder block assembly, 60 cc 1
QC50 10-48 11033144 Cylinder block assembly, 68 cc 1
Order code: P2 (replaced M2)
C010 10-48 11050248 Cylinder block kit, 60 cc, with speed ring 1
C010 10-48 11050247 Cylinder block kit, 68 cc, with speed ring 1
QC50 10-48 11106174 Cylinder block assembly, 60 cc, with speed ring 1
QC50 10-48 11106175 Cylinder block assembly, 68 cc, with speed ring 1
Parts continue to the next 2 pages
©
Danfoss | March 2022 AX152886482806en-000801 | 11
B010
B010
QD075
D070
C025
C020
QC10
C20
C15
C25
C010
QC50
QC10
C20
C15
C25
C010
QC50
D692
D703
(H1, M1, NN, P1, PN)
(M2, P2, P4)
Parts Manual
H1P 60 and 68cc
Common parts and special hardware
Parts configuration
Generic end cap, control and housing used to show part location only.
12 | © Danfoss | March 2022 AX152886482806en-000801
Parts Manual
H1P 60 and 68cc
Common parts and special hardware
Common parts
Item Date Begin Date End Part Number Part Name Qty. per
B010 10-48 5000757 Dowel pin 2
C020 10-48 9004700-1907 Valve plate pin 1
C025 10-48 11082840 Valve plate, CCW 1
C025 10-48 11081201 Valve plate, CW 1
C15 10-48 11033139 Slipper retainer guide 1
C20 10-48 11033140 Slipper retainer 1
C25 10-48 11040075 Slipper hold down pin 4
D070 10-48 11121000 Swashplate 1
QC10 10-48 11087709 Slipper/piston kit, 60 cc 1
QC10 10-48 11087710 Slipper/piston kit, 68 cc 1
QD075 10-48 11086555 Swashplate bearing kit 1
Order code: P4
C010 13-18 11050248 Cylinder block kit, 60 cc, speed ring 1
C010 13-18 11050247 Cylinder block kit, 68 cc, speed ring 1
QC50 13-18 11106174 Cylinder block assembly, 60 cc, with speed ring 1
QC50 13-18 11106175 Cylinder block assembly, 68 cc, with speed ring 1
Model/Kit
Order code: PN (replaced NN)
C010 10-48 11050563 Cylinder block kit, 60 cc 1
C010 10-48 11033143 Cylinder block kit, 68 cc 1
QC50 10-48 11050267 Cylinder block assembly, 60 cc 1
QC50 10-48 11033144 Cylinder block assembly, 68 cc 1
©
Danfoss | March 2022 AX152886482806en-000801 | 13
E100 912E
D300
D300
D200
QD25
*QD26
QD27
D050
D050
QD27
*QD26
QD100
QD25
D250
*D060
QD28
QD29
QD28
QD29
D065
*D150
Parts Manual
H1P 60 and 68cc
Controls
H1P control A2, A3
Generic housing shown.
* Included in overhaul seal kit Q210
14 | © Danfoss | March 2022 AX152886482806en-000801
Parts Manual
H1P 60 and 68cc
Controls
Common parts
Item Date Begin Date End Part Number Part Name Qty. per
D050 10-48 716860 Screw, M5 x 12 6
D060 10-48 612291 (9003508-0008) Seal nut, M8 1
D065 10-48 327007 Plug assembly (SAE) 1
D150 10-48 11227209 Control gasket (SB-2016-033 on page 154) 1
D200 10-48 11202172 Swash plate feedback link (SB-2018-025 on page
156)
D250 10-48 505038 Screw, M6 x 45 6
D300 10-48 310979 Dowel pin 2
QD26 10-48 11001952 O-ring 2
QD28 10-48 063172 O-ring 2
Order code: A2
QD25 10-48 11012457 Proportional solenoid, 12v 2
QD27 10-48 11028018 Coil kit, 12v, DEUTSCH connector 2
QD29 10-48 11027046 Coil nut 2
QD100 10-48 11019680 EDC kit, 12v, DEUTSCH connector, fast 1
Model/Kit
1
Order code: A3
QD25 10-48 11012459 Proportional solenoid, 24v 2
QD27 10-48 11028019 Coil kit, 24v, DEUTSCH connector 2
QD29 10-48 11028024 Coil nut 2
QD100 10-48 11019681 EDC kit, 24v, DEUTSCH connector, fast 1
©
Danfoss | March 2022 AX152886482806en-000801 | 15
QD27
QD28
QD29
QD30
QD27
QD28
QD29
QD30
D300
D300
D200
QD25
*QD26
D050
D050
*QD26
QD100
QD25
D250
*D060
D065
*D150
Parts Manual
H1P 60 and 68cc
Controls
H1P control A4, A5
A4 and A5 configuration
Generic housing shown.
* Included in overhaul seal kit Q210
16 | © Danfoss | March 2022 AX152886482806en-000801
Parts Manual
H1P 60 and 68cc
Controls
Common parts
Item Date Begin Date End Part Number Part Name Qty. per
D050 10-48 716860 Screw, M5 x 12 6
D060 10-48 612291 (9003508-0008) Seal nut, M8 1
D065 10-48 327007 Plug assembly 1
D150 10-48 11227209 Control gasket (SB-2016-033 on page 154) 1
D200 10-48 11202172 Swash plate feedback link (SB-2018-025 on page
156)
D250 10-48 505038 Screw, M6 x 45 6
D300 10-48 310979 Dowel pin 2
QD26 10-48 11001952 O-ring 2
QD28 10-48 063172 O-ring 2
QD30 10-48 11027883 Cap 2
Order code: A4
QD25 10-48 140750 Proportional solenoid, 12v 2
QD27 10-48 11004698 Coil kit, 12v, DEUTSCH connector 2
QD29 10-48 11004749 Coil nut 2
QD100 10-48 11019732 EDC kit, 12v, DEUTSCH connector, fast, manual
override
Model/Kit
1
1
Order code: A5
QD25 10-48 140751 Proportional solenoid, 24v 2
QD27 10-48 11004700 Coil kit, 24v, DEUTSCH connector 2
QD29 10-48 11004750 Coil nut 2
QD100 10-48 11019733 EDC kit, 24v, DEUTSCH connector, fast, manual
override
1
©
Danfoss | March 2022 AX152886482806en-000801 | 17
D300
D300
D200
*D150
QD100
D065
D067
D076
D250
*QD81
*D060
QD25
*QD26
QD27
D050
QD28
QD29
D050
QD27
*QD26
QD25
QD28
QD29
Parts Manual
H1P 60 and 68cc
Controls
H1P control A6
Parts configuration
Generic housing shown.
* Included in overhaul seal kit Q210
18 | © Danfoss | March 2022 AX152886482806en-000801
Parts Manual
H1P 60 and 68cc
Controls
Order code: A6
Item Date Begin Date End Part Number Part Name Qty. per
D050 10-48 12-49 716860 Screw, M5 x 12 6
D060 10-48 12-49 612291 (9003508-0008) Seal nut, M8 1
D065 10-48 12-49 327007 Plug assembly 1
D067 10-48 12-49 11040532 Plug assembly 1
D076 10-48 12-49 346957 Screw, M4 x 8 4
D150 10-48 12-49 11227209 Control gasket (SB-2016-033 on page 154) 1
D200 10-48 12-49 11202172 Swashplate feedback link (SB-2018-025 on page
156)
D250 10-48 12-49 505038 Screw, M6 x 45 6
D300 10-48 12-49 310979 Dowel pin 2
QD25 10-48 12-49 11012457 Proportional solenoid, 12V 2
QD26 10-48 12-49 11001952 O-ring 2
QD27 10-48 12-49 11028018 Coil kit, 12V, DEUTSCH connector 2
QD28 10-48 12-49 063172 O-ring 2
QD29 10-48 12-49 11027046 Coil nut 2
QD081 10-48 12-49 11059551 O-ring 1
QD100 10-48 12-49 11152574 EDC kit, 12V, high gain spool, control override
(SB-2015-035 on page 151)
Model/Kit
1
1
©
Danfoss | March 2022 AX152886482806en-000801 | 19
D300
D300
D250
QD100
D655
D660
D067
D055
QD25
*QD26
QD27
D050
QD28
QD29
QD30
D050
QD27
*QD26
QD25
QD28
QD29
QD30
D640
D674
D674
D672
*D150
*D611
*D612
Parts Manual
H1P 60 and 68cc
Controls
H1P control A7
Parts configuration
Generic housing shown
* Included in overhaul seal kit
20 | © Danfoss | March 2022 AX152886482806en-000801
Parts Manual
H1P 60 and 68cc
Controls
Order code: A7
Item Date Begin Date End Part Number Part Name Qty. per
D050 10-14 716860 Screw, M5 x 12 6
D055 10-14 11040532 Plug assembly 2
D067 10-14 327007 Plug assembly 1
D150 10-14 11227209 Control gasket (SB-2016-033 on page 154) 1
D250 10-14 505038 Screw, M6 x 45 6
D300 10-14 11036469 Dowel pin 2
D612 10-14 21-12 11003126 Plug (SB-2021-014 on page 158) 2
D612 21-13 11223708 Plug 2
D611 10-14 21-12 11066774 O-ring (SB-2021-014 on page 158) 2
D611 21-13 11225703 O-ring 2
D640 10-14 11023348 AC wiring harness 1
D655 10-14 11084827 Connector DTM 06-3S 1
D660 10-14 11084822 Connector DTM 06-6S 1
D672 10-14 11151875 Protection 1
D674 10-14 716860 Screw, M5 x 12 2
QD25 10-14 140750 Proportional solenoid, 12 volt 2
QD26 10-14 11001952 O-ring 2
QD27 10-14 11004698 Coil kit, 12v, DEUTSCH connector 2
QD28 10-14 063172 O-ring 2
QD29 10-14 11004749 Coil nut 2
QD30 10-14 11027883 Cap 2
QD100 10-14 11065118 Automotive control kit, 12v, manual override 1
Model/Kit
©
Danfoss | March 2022 AX152886482806en-000801 | 21
D300
D300
QD100
D250
QD25
*QD26
QD27
D050
QD28
QD29
QD30
D050
QD27
*QD26
QD25
QD28
QD29
QD30
D067
D055
D065
*D150
Parts Manual
H1P 60 and 68cc
Controls
H1P control A8
Parts configuration
Generic housing shown.
* Included in overhaul seal kit Q210
22 | © Danfoss | March 2022 AX152886482806en-000801
Parts Manual
H1P 60 and 68cc
Controls
Order code: A8
Item Date Begin Date End Part Number Part Name Qty. per
D050 10-48 716860 Screw, M5 x 12 6
D055 10-48 11040532 Plug assembly 2
D065 10-48 327007 Plug assembly 1
D067 10-48 327007 Plug assembly 1
D150 10-48 11227209 Control gasket (SB-2016-033 on page 154) 1
D250 10-48 505038 Screw, M6 x 45 6
D300 10-48 310979 Dowel pin 2
QD25 10-48 140750 Proportional solenoid, 12v, DEUTSCH connector 2
QD26 10-48 11001952 O-ring 2
QD27 10-48 11004698 Coil kit, 12v, DEUTSCH connector 2
QD28 10-48 063172 O-ring 2
QD29 10-48 11004749 Coil nut 2
QD30 10-48 11027883 Cap 2
QD100 10-48 11015803 NFPE control kit, 12V, manual override, DEUTSCH
connector
Model/Kit
1
©
Danfoss | March 2022 AX152886482806en-000801 | 23
D300
D300
QD100
D250
QD25
*QD26
QD27
D050
QD28
QD29
QD30
D050
QD27
*QD26
QD25
QD28
QD29
QD30
D065
*D150
Parts Manual
H1P 60 and 68cc
Controls
H1P control A9, B1
Parts configuration
Generic housing shown
* Included in overhaul seal kit Q210
24 | © Danfoss | March 2022 AX152886482806en-000801
Parts Manual
H1P 60 and 68cc
Controls
Common parts
Item Date Begin Date End Part Number Part Name Qty. per
D050 10-48 716860 Screw, M5 x 12 6
D065 10-48 327007 Plug assembly 1
D150 10-48 11227209 Control gasket 1
D250 10-48 505038 Screw, M6 x 45 6
D300 10-48 310979 Dowel pin 2
QD26 10-48 11001952 O-ring 2
QD28 10-48 063172 O-ring 2
QD30 10-48 11027883 Cap 2
Order code: A9
QD25 10-48 141301 Proportional solenoid, 12v, DEUTSCH connector 2
QD27 10-48 11005222 Coil kit, 12v, DEUTSCH connector 2
QD29 10-48 11004749 Coil nut 2
QD100 10-48 11025905 FNR control kit, 12v, manual override, DEUTSCH
connector
Model/Kit
1
Order code: B1
QD25 10-48 141313 Proportional solenoid, 24v, DEUTSCH connector 2
QD27 10-48 11005223 Coil kit, 24v, DEUTSCH connector 2
QD29 10-48 11004750 Coil nut 2
QD100 10-48 11025906 FNR control kit, 24v, manual override, DEUTSCH
connector
1
©
Danfoss | March 2022 AX152886482806en-000801 | 25
QD25
*QD26
QD27
D050
QD28
QD29
QD30
D050
QD27
*QD26
QD25
QD28
QD29
QD30
D065
D300
D300
QD100
D250
D200
D450
D055
*D150
Parts Manual
H1P 60 and 68cc
Controls
H1P control B5
Parts configuration
Generic housing shown
* Included in overhaul seal kit Q210
26 | © Danfoss | March 2022 AX152886482806en-000801
Parts Manual
H1P 60 and 68cc
Controls
Order code: B5
Item Date Begin Date End Part Number Part Name Qty. per
D050 10-14 716860 Screw 6
D055 10-14 11040532 Plug assembly 2
D067 10-14 327007 Plug assembly 1
D150 10-14 11227209 Control gasket (SB-2016-033 on page 154) 1
D200 10-14 141472 Screw 1
D250 10-14 505038 Screw 6
D300 10-14 310979 Dowel pin 2
D450 10-14 11003097 Magnet carrier 1
QD25 10-14 140750 Proportional solenoid, 12 volt 2
QD26 10-14 11001952 O-ring 2
QD27 10-14 11004698 Coil kit, 12V, DEUTSCH connector 2
QD28 10-14 063172 O-ring 2
QD29 10-14 11004749 Coil nut 2
QD30 10-14 11027883 Cap 2
QD100 10-14 11050138 NFPE control kit, 12V, manual override 1
Model/Kit
©
Danfoss | March 2022 AX152886482806en-000801 | 27
D200
D450
D300
D300
D250
QD100
D655
D660
D067
D055
QD25
*QD26
QD27
D050
QD28
QD29
QD30
D050
QD27
*QD26
QD25
QD28
QD29
QD30
D640
D674
D674
D672
*D150
*D611
*D612
Parts Manual
H1P 60 and 68cc
Controls
H1P control B7
Parts configuration
Generic housing shown.
* Included in overhaul seal kit Q210
28 | © Danfoss | March 2022 AX152886482806en-000801
Parts Manual
H1P 60 and 68cc
Controls
Order code: B7
Item Date Begin Date End Part Number Part Name Qty. per
D050 10-04 716860 Screw, M5 x 12 6
D055 10-04 11040532 Plug assembly 2
D067 10-04 327007 Plug assembly 1
D150 10-04 11227209 Control gasket (SB-2016-033 on page 154) 1
D200 10-04 141472 Screw, special 1
D250 10-04 505038 Screw, M6 x 45 6
D300 10-04 11036469 Dowel pin 2
D450 10-04 11003097 Magnet carrier 1
D611 10-04 21-12 11066774 O-ring (SB-2021-014 on page 158) 2
D611 21-13 11225703 O-ring 2
D612 10-04 21-12 11003126 Plug (SB-2021-014 on page 158) 2
D612 21-13 11223708 Plug 2
D640 10-04 11023348 AC wiring harness 1
D655 10-04 11084827 Connector DTM 06-3S 1
D660 10-04 11084822 Connector DTM 06-6S 1
D672 10-04 11151875 Protection 1
D674 10-04 716860 Screw, M5 x 12 2
QD25 10-04 140750 Proportional solenoid, 12 volt 2
QD26 10-04 11001952 O-ring 2
QD27 10-04 11004698 Coil kit, 12v, DEUTSCH connector 2
QD28 10-04 063172 O-ring 2
QD29 10-04 11004749 Coil nut 2
QD30 10-04 11027883 Cap 2
QD100 10-04 11065119 Automotive control kit, 12v, manual override 1
Model/Kit
©
Danfoss | March 2022 AX152886482806en-000801 | 29
D300
D300
QD100
D250
QD25
*QD26
QD27
D050
QD28
QD29
QD30
D050
QD27
*QD26
QD25
QD28
QD29
QD30
D067
D055
D065
*D150
Parts Manual
H1P 60 and 68cc
Controls
H1P control B8
Parts configuration
Generic housing shown.
* Included in overhaul seal kit Q210
30 | © Danfoss | March 2022 AX152886482806en-000801
Loading...