Installing a Danfoss GX Snow Melting System
provides a permanent solution to the problems
caused by cold weather. Improve safety by
providing instantaneous relief from snow and ice
and increase your bottom line by reducing the costs
associated with applying chemicals, owning snow
clearing machinery or hiring outside services.
300A contactor/timer panels consist of two, 3P, 50A contactors
600A contactor/timer panels consist of four, 3P, 50A contactors
Part No.Description
088L1053Cable Strapping (15 ft./4.5m)
088L1054Cable Strapping (75 ft./22.9m)
088L3051Ground Sensor (Two per package, includes 50 ft./15m lead wire)
088L3052Roof Sensor (includes 50 ft./15m. lead wire)
088L3405Nameplate (per NEC 426-13)
088L0010GX Repair Kit (includes: crimp connectors, heat shrink tubes, repair wire)
088L3038CDP-2 Remote Control and Display for Snow Sensors*
088L3039CS-1 Remote Control/Monitor Pigtail for CDP-2
89999997Extended Power Leads, factory spliced, 5 ft. increments**
*CDP-2 installation requires use of CS-1 pigtail
*CDP-2 can be used with DS-2C and DS-5C controllers
**Allow 10-12 weeks delivery time
Max.
Amps
Coil
Voltage
No. of
Contac-
tors
Warranty
Technical
Services
Danfoss can accept no responsibility for possible errors in catalogs, brochures, other printed materials, and website information. Danfoss reserves the right to alter its
products without notice. This also applies to products already on order provided that such alteration can be made without subsequent changes being necessary in
specications already agreed upon. All trademarks in this material are property of the respective companies. Danfoss and Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
Genuine twenty year comprehensive extended warranty against defects in material, design, and
workmanship.
For technical questions, please contact Danfoss Heating Division North America at 1-866-676-8062.
More information on Danfoss Electric Heating products is available at www.LX.Danfoss.com.