Danfoss FR8.5CL LBP Data sheet

FR8.5CL

LBP Compressor R404A/R507 220-240V 50Hz

General

Code number						103U2890
Approvals					EN 60335-2-34
Compressors on pallet						80
Application
Application						LBP
Frequency		Hz		50					60
Evaporating temperature		°C	-45 to -10						–
Voltage range		V	198 - 254						–
Max. condensing temperature continuous (short)		°C		50 (60)					–
Max. winding temperature continuous (short)		°C	125 (135)						–
Cooling requirements
Frequency		Hz		50					60
Application			LBP		MBP	HBP		LBP	MBP	HBP
32°C			F2		–	–		–	–	–
38°C			F2		–	–		–	–	–
43°C			–		–	–		–	–	–
Remarks on application:
Motor
Motor type						CSIR
LRA (rated after 4 sec. UL984), HST | LST		A		10.0					–
Cut in Current, HST | LST		A		10.0					–
Resistance, main | start winding (25°C)		Ω		7.3					12.0
Design
Displacement		cm3				7.95
Oil quantity (type)		cm3			450 (polyolester)
Maximum refrigerant charge		g				850
Free gas volume in compressor		cm3				1350
Weight without electrical equipment		kg				10.6
Dimensions
Height		mm	A			196
			B			191
			B1				–
			B2				–
Suction connector	location/I.D. mm | angle		C			8.2 | 30°
	material | comment			Cu-plated steel | Al cap
Process connector	location/I.D. mm | angle		D			6.2 | 30°
	material | comment			Cu-plated steel | Al cap
Discharge connector	location/I.D. mm | angle		E			6.2 | 25°
	material | comment			Cu-plated steel | Al cap
Oil cooler connector	location/I.D. mm | angle		F				–
	material | comment						–
Connector tolerance	I.D. mm					±0.09
Remarks:

S

= Static cooling normally sufficient

O

= Oil cooling

F1

= Fan cooling 1.5 m/s

(compressor compartment temperature

equal to ambient temperature)

F2

= Fan cooling 3.0 m/s necessary

SG

= Suction gas cooling normally sufficent

–= not applicable in this area

Dec 2011

Manufactured by Secop for Danfoss - CF.53.B3.02 / 520N1169

1/2

EN 12900 Household (CECOMAF)					220V, 50Hz, fan cooling F2
Evap. temp. in °C	-45	-40		-35	-30		-25		-23.3				-20	-15	-10	-6.7	-5		0	5	7.2	10	15	20
Capacity in W	99	126		168	222		290		317				372	468	577
Power cons. in W	171	198		231	271		315		331				364	417	472
Current cons. in A	1.61	1.64		1.72	1.83		1.97		2.03				2.15	2.35	2.57
COP in W/W	0.58	0.64		0.72	0.82		0.92		0.96				1.02	1.12	1.22
ASHRAE LBP*					220V, 50Hz, fan cooling F2
Evap. temp. in °C	-45	-40		-35	-30		-25		-23.3				-20	-15	-10	-6.7	-5		0	5	7.2	10	15	20
Capacity in W	115	147		195	259		338		369				434	546	674
Power cons. in W	171	198		231	271		315		331				364	417	472
Current cons. in A	1.61	1.64		1.72	1.83		1.97		2.03				2.15	2.35	2.57
COP in W/W	0.67	0.74		0.84	0.96		1.07		1.11				1.19	1.31	1.43

Accessories for	FR8.5CL	Figure	Code number
PTC starting device	6.3 mm spade connectors	a1	–
	4.8 mm spade connectors		–
Starting relay	6.3 mm spade connectors	a2	117U6010
Cover		b	103N2010
Start. capacitor 80 µF	6.3 mm spade connectors	c	117U5015
Cord relief		d	103N1010
Protection screen for PTC		g	–

Test conditions	EN 12900/CECOMAF	ASHRAE LBP*
Condensing temperature	45°C	45°C
Ambient temperature	32°C	32°C
Suction gas temperature	32°C	32°C
Liquid temperature	no subcooling	32°C

Mounting accessories			Code number
Bolt joint for one comp.	Ø: 16	mm	118-1917
Bolt joint in quantities	Ø: 16	mm	118-1918
Snap-on in quantities	Ø: 16	mm	118-1919

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed.

All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.

2/2

Manufactured by Secop for Danfoss - CF.53.B3.02 / 520N1169

Dec 2011