Danfoss FR7GH Data sheet

FR7GH

Heat Pump Compressor

R134a

220-240V 50/60Hz

General

Code number						103G6692
Approvals			EN 60335-2-34, UL984, CCC
Compressors on pallet						80
Application
Application						HBP
Frequency		Hz		50					60
Evaporating temperature		°C	-15 to 15					-15 to 15
Voltage range		V	198 - 254					198 - 254
Max. condensing temperature continuous (short)		°C		60 (70)					60 (70)
Max. winding temperature continuous (short)		°C	125 (135)					125 (135)
Cooling requirements
Frequency		Hz		50					60
Application			LBP		MBP	HBP		LBP		MBP	HBP
32°C			–		–	O		–		–	O
38°C			–		–	O		–		–	O
43°C			–		–	O		–		–	O
Remarks on application:
Motor
Motor type						CSIR
LRA (rated after 4 sec. UL984), HST | LST		A		9.1						–
Cut in Current, HST | LST		A		9.1						–
Resistance, main | start winding (25°C)		Ω		8.8					12.0
Design
Displacement		cm3				6.93
Oil quantity (type)		cm3			450 (polyolester)
Maximum refrigerant charge		g				900
Free gas volume in compressor		cm3				1350
Weight without electrical equipment		kg				10.6
Dimensions
Height		mm	A			196
			B			191
			B1				–
			B2				–
Suction connector	location/I.D. mm | angle		C			8.2 | 30°
	material | comment			Cu-plated steel | Al cap
Process connector	location/I.D. mm | angle		D			6.2 | 30°
	material | comment			Cu-plated steel | Al cap
Discharge connector	location/I.D. mm | angle		E			8.2 | 25°
	material | comment			Cu-plated steel | Al cap
Oil cooler connector	location/I.D. mm | angle		F			6.2 | 25°
	material | comment			Cu-plated steel | Al cap
Connector tolerance	I.D. mm					±0.09
Remarks:

S

= Static cooling normally sufficient

O

= Oil cooling

F1

= Fan cooling 1.5 m/s

(compressor compartment temperature

equal to ambient temperature)

F2

= Fan cooling 3.0 m/s necessary

SG

= Suction gas cooling normally sufficent

–= not applicable in this area

Dec 2011

Manufactured by Secop for Danfoss - DEHC.ED.400.L7.02 / 520N1198

1/2