Danfoss FR6G Data sheet

FR6G

Universal Compressor

R134a

220-240V 50/60Hz

General

Code number						103G6660
Approvals					EN 60335-2-34
Compressors on pallet						80
Application
Application			LBP/HBP							LBP
Frequency		Hz		50						60
Evaporating temperature		°C	-30 to 10					-30 to -10
Voltage range		V	187 - 254					198 - 254
Max. condensing temperature continuous (short)		°C		60 (70)				60 (70)
Max. winding temperature continuous (short)		°C	125 (135)					125 (135)
Cooling requirements
Frequency		Hz		50						60
Application			LBP		MBP	HBP		LBP		MBP	HBP
32°C			S		F2	F2		S		–	–
38°C			S		F2	F2		S		–	–
43°C			S		F2	F2		S		–	–
Remarks on application: HBP at 198 - 254V 50Hz only.
Motor
Motor type						RSIR/CSIR
LRA (rated after 4 sec. UL984), HST | LST		A		7.5						5.8
Cut in Current, HST | LST		A		7.5						10.5
Resistance, main | start winding (25°C)		Ω		12.6						12.4
Design
Displacement		cm3				6.23
Oil quantity (type)		cm3			450 (polyolester)
Maximum refrigerant charge		g				900
Free gas volume in compressor		cm3				1350
Weight without electrical equipment		kg				10.6
Dimensions
Height		mm	A			196
			B			191
			B1				–
			B2				–
Suction connector	location/I.D. mm | angle		C			8.2 | 30°
	material | comment			Cu-plated steel | Al cap
Process connector	location/I.D. mm | angle		D			6.2 | 30°
	material | comment			Cu-plated steel | Al cap
Discharge connector	location/I.D. mm | angle		E			6.2 | 25°
	material | comment			Cu-plated steel | Al cap
Oil cooler connector	location/I.D. mm | angle		F				–
	material | comment						–
Connector tolerance	I.D. mm					±0.09
Remarks:

S

= Static cooling normally sufficient

O

= Oil cooling

F1

= Fan cooling 1.5 m/s

(compressor compartment temperature

equal to ambient temperature)

F2

= Fan cooling 3.0 m/s necessary

SG

= Suction gas cooling normally sufficent

–= not applicable in this area

August 2012

Manufactured by Secop for Danfoss - DEHC.ED.400.I8.02 / 520N1378

1/2

EN 12900 Household (CECOMAF)						220V, 50Hz, fan cooling F2
Evap. temp. in °C		-45	-40		-35	-30					-25	-23.3	-20		-15		-10	-6.7				-5	0	5	7.2		10		15	20
Capacity in W						47.7					83.3	96.5	124		171		226	267				290	365	452	494		552
Power cons. in W						91.3					109	115	129		149		172	186				194	218	241	251		264
Current cons. in A						0.79					0.85	0.87	0.91		0.98		1.06	1.11				1.14	1.23	1.33	1.37		1.43
COP in W/W						0.52					0.76	0.84	0.96		1.14		1.32	1.43				1.49	1.68	1.88	1.97		2.09
EN 12900 Household (CECOMAF)						220V, 60Hz, fan cooling F2
Evap. temp. in °C		-45	-40		-35	-30					-25	-23.3	-20		-15		-10	-6.7				-5	0	5	7.2		10		15	20
Capacity in W						50.6					92.5	108	141		199		266
Power cons. in W						94.8					119	127	144		170		197
Current cons. in A						0.69					0.77	0.80	0.86		0.97		1.09
COP in W/W						0.53					0.78	0.85	0.98		1.17		1.35
ASHRAE LBP						220V, 50Hz, fan cooling F2
Evap. temp. in °C		-45	-40		-35	-30					-25	-23.3	-20		-15		-10	-6.7				-5	0	5	7.2		10		15	20
Capacity in W						58.9					103	119	153		211		279	330				359	452	561	614		687
Power cons. in W						91.3					109	115	129		149		172	186				194	218	241	251		264
Current cons. in A						0.79					0.85	0.87	0.91		0.98		1.06	1.11				1.14	1.23	1.33	1.37		1.43
COP in W/W						0.64					0.94	1.03	1.19		1.41		1.63	1.77				1.85	2.08	2.33	2.44		2.60
ASHRAE LBP						220V, 60Hz, fan cooling F2
Evap. temp. in °C		-45	-40		-35	-30					-25	-23.3	-20		-15		-10	-6.7				-5	0	5	7.2		10		15	20
Capacity in W						62.4					114	134	175		246		329
Power cons. in W						94.8					119	127	144		170		197
Current cons. in A						0.69					0.77	0.80	0.86		0.97		1.09
COP in W/W						0.66					0.96	1.05	1.21		1.44		1.67

Accessories for	FR6G	Figure	Code number
PTC starting device	6.3 mm spade connectors	a1	103N0011
	4.8 mm spade connectors		103N0018
Starting relay	6.3 mm spade connectors	a2	117U6000
Start. capacitor 80 µF	6.3 mm spade connectors	c	117U5015
Cover		b	103N2010
Cord relief		d	103N1010
Protection screen for PTC		g	103N0476

Test conditions	EN 12900/	ASHRAE
	CECOMAF
Condensing temperature	55°C	55°C
Ambient temperature	32°C	32°C
Suction gas temperature	32°C	32°C
Liquid temperature	55°C	32°C

Mounting accessories			Code number
Bolt joint for one comp.	Ø: 16	mm	118-1917
Bolt joint in quantities	Ø: 16	mm	118-1918
Snap-on in quantities	Ø: 16	mm	118-1919

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed.

All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.

2/2

Manufactured by Secop for Danfoss - DEHC.ED.400.I8.02 / 520N1378

August 2012