Danfoss FR10G Data sheet

FR10G

Universal Compressor

R134a

220-240V 50/60Hz

General

Code number						103G6890
Approvals					EN 60335-2-34, CCC
Compressors on pallet						80
Application
Application			LBP/HBP							LBP
Frequency		Hz		50						60
Evaporating temperature		°C	-30 to 10					-30 to -10
Voltage range		V	187 - 254					198 - 254
Max. condensing temperature continuous (short)		°C		60 (70)				60 (70)
Max. winding temperature continuous (short)		°C	125 (135)					125 (135)
Cooling requirements
Frequency		Hz		50						60
Application			LBP		MBP	HBP		LBP		MBP	HBP
32°C			S		F2	F2		S		–	–
38°C			S		F2	F2		S		–	–
43°C			O		F2	F2		O		–	–
Remarks on application: HBP at 198 - 254V 50Hz only.
Motor
Motor type						RSIR/CSIR
LRA (rated after 4 sec. UL984), HST | LST		A		10.0						10.3
Cut in Current, HST | LST		A		10.0						15.0
Resistance, main | start winding (25°C)		Ω		7.3						12.0
Design
Displacement		cm3				9.05
Oil quantity (type)		cm3			450 (polyolester)
Maximum refrigerant charge		g				900
Free gas volume in compressor		cm3				1350
Weight without electrical equipment		kg				10.6
Dimensions
Height		mm	A			196
			B			191
			B1				–
			B2				–
Suction connector	location/I.D. mm | angle		C			8.2 | 30°
	material | comment			Cu-plated steel | Al cap
Process connector	location/I.D. mm | angle		D			6.2 | 30°
	material | comment			Cu-plated steel | Al cap
Discharge connector	location/I.D. mm | angle		E			6.2 | 25°
	material | comment			Cu-plated steel | Al cap
Oil cooler connector	location/I.D. mm | angle		F			6.2 | 25°
	material | comment			Cu-plated steel | Al cap
Connector tolerance	I.D. mm					±0.09
Remarks:

S

= Static cooling normally sufficient

O

= Oil cooling

F1

= Fan cooling 1.5 m/s

(compressor compartment temperature

equal to ambient temperature)

F2

= Fan cooling 3.0 m/s necessary

SG

= Suction gas cooling normally sufficent

–= not applicable in this area

August 2012

Manufactured by Secop for Danfoss - DEHC.ED.400.P2.02 / 520N1380

1/2

EN 12900 Household (CECOMAF)						220V, 50Hz, fan cooling F2
Evap. temp. in °C		-45	-40		-35	-30					-25	-23.3	-20		-15		-10	-6.7				-5	0	5	7.2		10		15	20
Capacity in W						91.9					136	152	188		250		324	380				412	516	638	697		779
Power cons. in W						155					179	188	205		234		265	286				296	329	362	376		394
Current cons. in A						1.51					1.58	1.61	1.66		1.75		1.84	1.91				1.94	2.05	2.16	2.21		2.28
COP in W/W						0.59					0.76	0.81	0.91		1.07		1.22	1.33				1.39	1.57	1.76	1.85		1.98
EN 12900 Household (CECOMAF)						220V, 60Hz, fan cooling F2
Evap. temp. in °C		-45	-40		-35	-30					-25	-23.3	-20		-15		-10	-6.7				-5	0	5	7.2		10		15	20
Capacity in W						98.8					153	173	217		292		381
Power cons. in W						163					194	206	230		270		314
Current cons. in A						1.32					1.44	1.48	1.57		1.73		1.90
COP in W/W						0.61					0.79	0.84	0.94		1.08		1.21
ASHRAE LBP						220V, 50Hz, fan cooling F2
Evap. temp. in °C		-45	-40		-35	-30					-25	-23.3	-20		-15		-10	-6.7				-5	0	5	7.2		10		15	20
Capacity in W						113					167	188	232		308		400	470				510	639	791	866		968
Power cons. in W						155					179	188	205		234		265	286				296	329	362	376		394
Current cons. in A						1.51					1.58	1.61	1.66		1.75		1.84	1.91				1.94	2.05	2.16	2.21		2.28
COP in W/W						0.73					0.93	1.00	1.13		1.32		1.51	1.65				1.72	1.94	2.19	2.30		2.46
ASHRAE LBP						220V, 60Hz, fan cooling F2
Evap. temp. in °C		-45	-40		-35	-30					-25	-23.3	-20		-15		-10	-6.7				-5	0	5	7.2		10		15	20
Capacity in W						122					188	214	267		361		47 1
Power cons. in W						163					194	206	230		270		314
Current cons. in A						1.32					1.44	1.48	1.57		1.73		1.90
COP in W/W						0.75					0.97	1.04	1.16		1.34		1.50

Accessories for	FR10G	Figure	Code number
PTC starting device	6.3 mm spade connectors	a1	103N0011
	4.8 mm spade connectors		103N0018
Starting relay	6.3 mm spade connectors	a2	117U6010
Start. capacitor 80 µF	6.3 mm spade connectors	c	117U5015
Cover		b	103N2010
Cord relief		d	103N1010
Protection screen for PTC		g	103N0476

Test conditions	EN 12900/	ASHRAE
	CECOMAF
Condensing temperature	55°C	55°C
Ambient temperature	32°C	32°C
Suction gas temperature	32°C	32°C
Liquid temperature	55°C	32°C

Mounting accessories			Code number
Bolt joint for one comp.	Ø: 16	mm	118-1917
Bolt joint in quantities	Ø: 16	mm	118-1918
Snap-on in quantities	Ø: 16	mm	118-1919

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed.

All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.

2/2

Manufactured by Secop for Danfoss - DEHC.ED.400.P2.02 / 520N1380

August 2012