Danfoss DTCE 200T Data sheet

1. Embedded systems
Data Sheet
DTCE
DTCE 200T
DTCE is an extremely high-quality, 360° fully screened twin conductor heating mat with a tough outer sheath (UV stable). Its round profile and robust construction ensures a fast, simple and safe installation in floors where the heating cable is embedded in concrete.
Designed for indoor heating applications, placed and fixed on insulation and covered by minimum 100 mm concrete.
The cold lead has solid conductors ensuring fast installation with a clearly visible connection. To ensure a long life-time, all cables are minutely inspected including tests for Ohmic
resistance, high voltage and material controls to ensure the quality. This means that we are proud to supply our extended DEVIwarranty™.
Note. DTCE heating mat is not approved for installation on roof because the fixing tape is not UV-stable.
Benefits:
• Fast and easy to install
Type
Nominal voltage 230V~
Construction
Value
Round, twin conductor with 360° screening,
• Multiple outdoor applications
• Safe and robust
• Long life-time
• Maximum protection
• UV stable
Standard compliance:
• IEC60800:2009
Approvals:
Output 200 W/m² @ 230 V~
Max. permissible use temperature, powered 60 °C
Max. permissible use temperature, unpowered 90 °C
Cable thickness 7 mm
Deformation strength >1500 N
Pulling strength >300 N
Conductor insulation FEP
Outer sheath UV protected PVC
Screen
Cold lead 6 m DTWC, 2 x 1,5 mm², earthed
Min. installation temperature -5°C
Bending Ø 6 x cable diameter
IP Class IPX7
0,5 mm² tinned copper drain wire
100% coverage; alu-foil;
Types: set DTCE 200T + Cable ties (100 pcs.)
Item no. Output @ 230V~ Di mensions (W x L) Area Resistance Cold lead EAN no.
one cold lead
Produced by Danfoss ©
AI164886464245en-000202
1
Loading...