Danfoss DSP1 Data sheet
Data Sheet
Direction Indicator for PVG
PVDI
The PVDI is a part of the Danfoss product portfolio and offers an independent electrical direction feedback for PVG 32 and PVG 100.
The PVDI can be used in combination with manual control, hydraulic control and electrical control.
The PVDI offers an independent monitoring on the spool position relative neutral and can be used for a redundant feedback to the system controller.
The PVDI can be used on an optional number of PVB in a PVG.
The PVDI is designed for use on spools with 1.5 mm [0.059 in] dead band.
The PVDI can not be used with PVMF or PVMR.
Features |
|
||
• |
Redundant spool movement detection |
|
|
Comprehensive technical literature online |
|||
• |
Fits PVG100 and PVG32 with 1.5 mm |
||
at powersolutions.danfoss.com |
|||
|
PVBS |
||
|
|
||
•Electrical feedback can supply a relay
•Must be shielded
V310352-E
© Danfoss | May 2017 |
L1211133 | AI00000204en-US0402 | 1 |
|
|
|
Dimensions |
157B0104 – PVHC and PVH controlled PVBS |
|
11.8
[0.465]
|
|
|
<![if ! IE]> <![endif]>45 |
<![if ! IE]> <![endif]>[1.77] |
|
33.2 |
|
3 |
|
|
[1.31] |
35.5 |
[0.12] |
|
|
322 |
[1.40] |
|
|
|
|
|
|
|
| <![if ! IE]> <![endif]>123 |
[12.68] |
|
|
|
| <![if ! IE]> <![endif]>[4.84] |
|
V310355-B |
||
|
|
|
||
157B0101 – PVE and PVM controlled PVBS
45 |
33.2 |
[1.77] |
[1.307] |
V310354
| <![if ! IE]> <![endif]>45 |
<![if ! IE]> <![endif]>[1.77] |
33.2 |
133.1 |
[1.31] |
[5.24] |
322 |
142.3 |
[12.68] |
[5.60] |
|
V310353-A
Direction indication feedback
|
|
|
|
DI-A high |
DI-A low |
|
|
|
|
DI-B high |
|
|
|
|
|
|
|
|
DI-B low |
|
-0.8 -0.4 |
0 |
0.4 0.8 |
Spool position ‘x’ |
A-port |
B-port mm [in] |
|||
PVBS towards PVE |
|
PVBS away from PVE |
||
Technical specifications
Voltage |
12 V – 24 V (min. 10 V / max. 38 V) |
Current consumption |
10 mA – 100 mA |
Maximum current draw on pins |
5 A |
Switch position |
± 0.7 mm (+0.3/-0.2) [± 0.028 in |
|
(±0.01)] |
Grade of enclosure* |
IP 65 |
* According to the standard IEC 60529 Edition 2.2 2013-08, protection in the form of screening is recommended.
Accessories
Male connector for PVDI: 157B0109 DIN/Hirschmann G4W1F.
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without changes being necessary in specifications already agreed.
All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
2 | © Danfoss | May 2017 |
L1211133 | AI00000204en-US0402 |
Loading...