Danfoss DSIA-300, DSIA-25 Operating guide [tr]

Installation Instructions
devimat
TM
DSIA-300
TM
DSIA-25
single-conductor heating cable
for outdoor applications, 230V or
for outdoor applications, 230V or
400V
400V
GB/DAS
devi ex
TM
DSIA heating cable and devimat
TM
devi ex
and devimat
DSIA heating
cable/mat is used for ice and snow
melting of outdoor area and other
applications with embedding in
concrete.
This instruction covers ice and snow
melting of outdoor areas.
Should you require further information
about other areas of use please con-
sult our DEVI heating cable compen-
diums.
Cable
Type
Voltage
Cold tail
Conductor insulation
Sheath
devimat
TM
DSIA-300 (300 W/m
2
)
devi ex
DSIA-25 (25 W/m)
Single-conductor with screen and armour
230 or 400 V AC (check the lable)
Ø 5,5 mm.
2 x 4 m, 2 x 1,5 mm
+ screen
XLPE (Polyethylene)
60ºC
2000 N (IEC 800 Class C)
where the heating cable or mat is
Area of use
Effect W/m²
Areas of use
with even spacing over the whole
where the cable, connections and
without air pockets.
thermostat.
Allow the concrete to dry for
At low temperatures the heating
heating cable or mat.
 tting band for cables.
exceeds
may not be shortened
Amount of m² free area • 100
and
is reached by using an
thermostat which
Colour
Accessories
without unreasonable delay to the
without prior concent from DEVI.
At all times, we at DEVI will respond
The DEVI Warranty:
You have purchased a deviheat
provides complete heating
thermostats and
 tting bands.
heating cables for a 10 year
that the WARRANTY CER-
Art. no. 08098100 · 02.01
Address:
Application:
Loading...