Danfoss DS-5C Data sheet

Data Sheet DS-5C Built-in Sensor/Controller

for Snow Melting Applications

General
Information

Technical Data

The DS-5C is designed for economical and eective con­trol of heating cables in residential and commercial snow
and ice melting applications. Built for bigger heating
loads, the DS-5C regulates cable operation in driveways,
sidewalks, and ramps as a stand alone controller or as a
sensor for larger heating systems.

• Super bright front panel power/activation LED
indicator

• Housed in a weatherproof enclosure

• Senses both moisture and temperature

• Adjustable temperature trigger point

• Adjustable delay o drying time

• Manual override capable

• Selectable low temperature cuto

• Remote control and monitor capabilites

• Easy to install

• Two year warranty

Supply: 100-277V, Field Selectable
Max. Heating Load: 60A (2 x 30A)
Operating Temperature: -40°F to 185°F (-40°C to 85°C)
Enclosure Type: NEMA 3R
Mounting: Pole or Wall Mounted, outdoors
Dimensions (HxWxD): 4.75” x 7.0” x 2.75” (121mm x 178mm x 70mm)
Trigger Temperature: 34°F to 44°F (1.1°C to 6.6°C), Field Selectable
Delay Timer: 30-90 minutes, Field Selectable

Internal Diagram

© Copyright 2016 Danfoss VDAPL222.07/16 TEL: [phone], FAX: [phone] 1

Typical Application

Ordering Information

Applications

Products in this data sheet are for
use with these Danfoss mats and
cables:

Accessories

Warranty

Technical
Services

Danfoss can accept no responsibility for possible errors in catalogs, brochures, other printed materials, and website information. Danfoss reserves the right to alter its
products without notice. This also applies to products already on order provided that such alteration can be made without subsequent changes being necessary in

specications already agreed upon. All trademarks in this material are property of the respective companies. Danfoss and Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.

Part No. Description

088L3046 DS-5C Snow Melt Controller (60A)

Danfoss Electric Heating Products

GX Electric Snow Melting Cables and Mats

Part No. Description
088L3038 CDP-2 Remote Control & Display for Snow Sensors*
088L3039 CS-1 Remote Control/Monitor Pigtail for CDP-2

*CDP-2 installation requires use of CS-1 pigtails

Danfoss oers a two year limited warranty covering defects in workmanship and materials.

For technical questions, please contact Danfoss Heating Division North America at 1-866-676-8062.
More information on Danfoss Electric Heating products is available at www.LX.Danfoss.com.

Danfoss

Toll Free: 1-866-676-8062
Tel.: [phone]
Fax: [phone]
www.Heating.Danfoss.us

Danfoss GX

BRINGING WARMTH TO LIFE

© Copyright 2016 Danfoss VDAPL222.07/16 TEL: [phone], FAX: [phone] 2