Data Sheet
General
Information
DS-2C Built-in Sensor/Controller for Snow Melting Applications
The DS-2C is designed for economical and effective control of heating cables in residential and commercial snow and ice melting applications. With versatility in mind,
it can be used as a stand alone controller or as a sensor for larger systems. It regulates cable operation in driveways, sidewalks, and ramps.
•Housed in a weatherproof enclosure
•Senses both moisture and temperatures
•Adjustable temperature trigger point
•Expanded 30-90 min. & 2-6 hr. delay off drying time
•Manual override capable
•Selectable low temperature cutoff with unique Recover module
•Super bright front panel power/activation LED indicator
•Remote control and monitor capabilities
•Easy to install
•Two year warranty
Technical Data
Supply: |
100-277V Universal input power supply |
Max. Heating Load: |
30A @ 277 VAC |
Operating Temperature: |
-40°F to 185°F (-40°C to 85°C) |
Enclosure Type: |
NEMA 3R |
Mounting: |
Pole or Wall Mounted, outdoors |
Dimensions (HxWxD): |
4.75” x 7.0” x 2.75” (121mm x 178mm x 70mm) |
Trigger Temperature: |
34°F to 44°F (1.1°C to 6.6°C), Field Selectable |
Delay Timer: |
30-90 minutes, Field Selectable |
Internal Diagram
© Copyright 2016 Danfoss |
VDIOQ122 . 08/16 |
TEL: 866-676-8062, FAX: 416-352-5981 1 |