Danfoss DEVIpipeheat 10 V3 Data sheet

Data Sheet

DEVIpipeheat™ 10 V3

The DEVIpipeheat™ 10 V3 is a self-limiting heating cable that is used for frost protection of pipes.

The self-limiting capability of the cable ensures that the output of the cable increase or decrease according to ambient temperature.

A new self-limiting cable can be installed inside and outside water pipes. It is suitable for drinking and common water pipes and is designed to be installed on pipe in all countries and inside pipe in certiﬁed countries (DK, FI, SE, NO, RU). The product range: cable on drum, cut-to-length, ready-made cable with cold lead.

The product range: drum cable and cable with cold lead mains plug. All self-limiting heating cables must be over-temperature protected by a thermostat, as the output will decrease, but never be zero , and be protected by a RCD with a maximum trip current of 30 mA.

Note 1: It is the full responsibility of the installer/designer to use proper cold lead dimensioned for the purpose and assembly sets that establish suﬃcient mechanical strength, ﬂammability resistance and water tightness - and to design the heating unit with correct output for the speciﬁc application to avoid overheating of the cable or building materials.

Beneﬁts:

• Cut to length on site

• Ready-made lengths

• Small cable size

• Inside and outside pipe installation

• Installation inside drinking water pipes

Standard compliance:

• IEC 60335-1:2012

• IEC 60800:2009

Approvals:

Type

Nominal voltage 230 V~

Nominal output (tolerance) 10 W/m @ 10 °C (7,5-13,5 W/m @ 10 °C )

Max. permissible use temperature, powered 65 °C

Max. permissible use temperature, unpowered 65 °C

Minimum installation temperature - 5 °C Max. water temperature (inside water pipe

installation) Max. water pressure (inside water pipe

installation) Heating cable dimensions 8,75 × 5,15 mm

Outer sheath HDPE + blue PVDF

Minimum Screen Coverage 100% aluminium foil

Maximum resistance protective braid 36 Ω/Km

Bending Ø, min. 50 mm (inside of the cable) Cold lead with plug 2 m, 3 х 0,75 mm²

IP Class for ready made unit IP Class for heating part and end termination

Value

Types: Drum

Item no. Length Min-max length

per drum

98300007 Drum, 100 m 100 m 1 10 W/m 5703466249758 98300008 Drum, 300 m 300 m 1 10 W/m 5703466249765 98300009 Drum, 900 m 900-1100 m 2, between 100 & 1100 m 10 W/m 5703466249772 98300012 Cut-to-length 1 – 900 m 1 / 2 10 W/m 5703466249789

Number of length

allowed on drum, max

Nominal

output @ 10 °C

23 °C

10 bar

IP67 IP68

EAN no.

Produced by Danfoss ©AI392949270378en-010102

Types: Ready-made with Schuko plug

W/m

Pipe temperature (°C)

Item no. Length Nominal output @ 10 °C Cold lead EAN no.

140F0921 2 m 20 W 2 m 5703466249796 140F0922 4 m 40 W 2 m 5703466249802 140F0923 6 m 60 W 2 m 5703466249819 140F0924 8 m 80 W 2 m 5703466249826 140F0925 10 m 100 W 2 m 5703466249833 140F0926 12 m 120 W 2 m 5703466249840 140F0927 14 m 140 W 2 m 5703466249857 140F0928 16 m 160 W 2 m 5703466249864 140F0929 19 m 190 W 2 m 5703466249871 140F0930 22 m 220 W 2 m 5703466249888 140F0931 25 m 250 W 2 m 5703466249895

Types: Ready-made with Danish plug

Item no. Length Nominal output @ 10 °C Cold lead EAN no.

140F0932 2 m 20 W 2 m 5703466249901 140F0933 4 m 40 W 2 m 5703466249918 140F0934 6 m 60 W 2 m 5703466249925 140F0935 8 m 80 W 2 m 5703466249932 140F0936 10 m 100 W 2 m 5703466249949 140F0937 12 m 120 W 2 m 5703466249956 140F0938 14 m 140 W 2 m 5703466249963 140F0939 16 m 160 W 2 m 5703466249970 140F0940 19 m 190 W 2 m 5703466249987 140F0941 22 m 220 W 2 m 5703466249994 140F0942 25 m 250 W 2 m 5703466250006

Pipe ﬁtting

Item no. EAN no. Name Description

Wadding for Internal mounting In pipe for DEVIpipeheat™ 10 V3

140F0956 5703466250037

3/4”+1” Pipe Fitting DEVIpipeheat™ 10 V3

Stainless steel pipe ﬁtting and nut. Rubber conic sliced sleeve, oval hole. Max. water pressure - 10 Bar at max. water temperature 23 °C

Maximum heating circuit length on a pipe, with circuit breaker with C-characteristic

Switch on

temperature

10 °C 100 60

0 °C 96 -

-20 °C 77 -

DEVIpipeheat™ 10 V3

10 A

on pipe in pipe

Power output characteristic

Output of heating cable installed and measured on a pipe.

0 10 20 30 40 50 60

DEVIpipeheat 10 V3