Danfoss Coolselector 2 Installation guide

2022-02-22 | Installation on multi-user systems

Coolselector®2 Server Installation Guide

Easy and time saving calculation and component selection.

System requirements

Coolselector®2 runs on Microsoft Windows 7 or later. In case you need to install Coolselector®2 on computers configured
differently, you have two options:

1. Use http://coolselectoronline.danfoss.com for an online experience.

2. Contact us at [e-mail] for installation support on older configurations.

Multi-user systems

Coolselector®2 should only be installed on multi-user systems by qualified personnel. The command-line switches for the
setup program listed below might be useful for such installations:

• /VERYSILENT

No message boxes, confirmations, etc.

• /MERGETASKS=”!desktopicon,!startmenu”

No icons in start menu or on desktop

• /ALLUSERS

Install icons for All users instead of current user (default). Requires the installation to be run with administrative
privileges.

• /DIR=”x:\di r n a me”

Overrides the default directory name. A fully qualified pathname must be specified. May include an “expand:” prefix
which instructs Setup to expand any constants in the name. For example: ”/DIR=expand:”{pf}\My Program”“ will
install into ”Program files (x86)\My Program“ folder. Note that depending on folder, installation might require
administrative privileges.

• /NoAutoUpdate

Prevents Coolselector®2 from trying to automatic check for updates

Command line example:

setup.exe /VERYSILENT/MERGETASKS=”!desktopicon,!startmenu”
/DIR=”c:\Coolselector2” /NoAutoUpdate

Download Coolselector®2

http://coolselector.danfoss.com/Coolselector2/setup.exe

© Danfoss | Climate Solutions | 2022.02AN153786417087en-000501