Danfoss Connecto NA Data sheet
Data Sheet
YEAR
WARRANTY
Product specifications
Product
Connecto NA - CSA
Power Connection Kits
Danfoss Connecto NA is a family of connection kits for self-regulating heating
cables (trace heaters). The Connecto NA connection kits are simple and safe to use,
yet faster to install and more cost effective than conventional systems. They can be
used with Danfoss:
• PX Pipe Trace Heating Systems
• RX-C Roof and Gutter De-Icing Systems
Benefits
• Fast and easy to install
• Cost savings by reduced assembly time
• Great reliability of assembly simplicity
• Safe electrical contacting by precise clamp
cutting technology
• Watch the installation video:
http://bit.ly/Connecto-Video
Approvals:
Operating Voltage Max. 250 V AC
Current Max. 16 A
Ambient Temperature Range -40 °F to 185 °F / -40 °C to 85° C
Operation Temperature Range -40 °F to 150 °F / -40 °C to 65 °C
Protection Class NEMA Type 4X / IP66
Types
Item no. Product name Assembly Type EAN no.
088L0760 Connecto NA-B-PK Power/End Seal Kit Power connection assembly with End Seal 5703466244517
088 L0761 Connecto NA-B-P Power Kit Power connection assembly 570346624 4524
088L0762 Connecto NA-B-S Splice Kit Splice assembly 5703466244531
088L0763 Connecto NA-B-PS Powered Splice Kit Powered splice assembly 5703466244548
088L0764 Connecto NA-B-T T-Splice Kit T-splice assembly 5703466244555
088L0765 Connecto NA-B-PT Powered T-Splice Kit Powered t-splice 5703466244562
088L0766 Connecto NA-B-X X-Splice Kit X-splice 5703466244579
088L0767 Connecto NA-B-E Silicone/ End Seal Kit End seal 5703466244586
ATTENTION. Danfoss Connecto NA may not be put in the gutters when used Roof applications. Must be installed in a dry place.
Electrical heating · ©Danfoss AI297171668691en-010103
Kit contents. Danfoss Connecto NA for CSA heating cables with braiding: SLPG-10 (PX-F3), SLPG-15/SLIG-18 (PX-F5),
SLPG-25/26 (PX-F8), SLPG-33 (PX-F10).
Included within each kit
Ordering Information
088L0760
Connecto NA-B-PK
Power connection with
end seal
088L0761
Connecto NA-B-P
Power connection
088L0762
Connecto NA-B-S
Splice connection kit
088L0763
Connecto NA-B-PS
Powered splice kit
Base
conection
Threaded
╳
1
╳
1
╳
1
╳
1
cap
Sleeve
ping
sleeve
Clam-
╳
1
╳
1
╳
2
╳
2
╳
1
╳
1
╳
2
╳
2
Clam-
ping
End cap
sheet
╳
1
╳
1
╳
1
Silicone
adhesive
— —
╳
1
╳
1
— —
╳
2
╳
2
— —
╳
2
╳
2
╳
1
088L0764
Connecto NA-B-T
T-Connection kit
088L0765
Connecto /NA-B-PT
Powered T-Connection kit
088L0766
Connecto NA-B-X
X-Connection kit
088L0767
Connecto NA-B-E
Silicone end seal (5X)
Connecto NA system installation steps
1. Cut the heating cable straight
2. Push the heating cable in
3. Twist untill closed
╳
1
╳
1
╳
1
╳
3
╳
3
╳
4
╳
3
╳
3
╳
4
╳
3
╳
3
╳
4
— — — — —
╳
3
╳
3
╳
4
— —
— —
— —
╳
5
╳
1
AI297171668691en-010103Electrical heating · ©Danfoss
Loading...